Broyhill THORNWOOD AW WICKER GB21-805 User manual

ASSEMBLY INSTRUCTIONS
ITEM# : GB21-805
SKU# : 810500148
THORNWOOD AW WICKER LOUNGE WITH CUSHION
Need help? We are here for you! 1-888-733-8169 Toll Free
Or email us at customerservice [e-mail],customerservice [e-mail]
customerservice [e-mail]

Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Helpful hints provided along the way
Retain these assembly instructions for future reference.
WARNINGS:
Use the correct bolts as indicated. All bolts should be hand tighten until the complete piece is assembled ( This
will make the assembly process much easier ) .
Once the piece is fully assembled, then go back and tighten all bolts with provided tool.
Regularly check hardware and tighten if necessary.
Use the correct bolts as indicated. Do not tighten any of the bolts until the Lounge is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children and pets away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Lounge is for sitting and lying purposes only. Standing on or misuse of Lounge may result in damage or injury.
Weight limit is 250 lbs ( 113.6 kg). Not intended for commercial use.
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery
cleaner if necessary.
If washed, rinse well and hang to dry. Do not machine wash or dry.
Well recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and safety of
your product.
In order to prolong the life and beauty of your product, we recommend that it be stored in a dry and protected area
during off season periods.
GENERAL BEST PRACTICE FOR ASSEMBLY:
MAINTENANCE:
WARNINGS:

PARTS LIST
Part No. Part Qty Image Part No. Part Qty Image
1Lounge Seat Panel 1 8 Bolt(M6x18mm) 6
2Lounge Back 1 9 Bolt(M6x45mm) 8
3Position Bracket 1 10 Bolt(M8x28mm) 2
4Left Arm 1 11 Bolt(M6x14mm) 4
5Right Arm 1 12 Bolt(M8x19mm) 2
6Lounge Leg 2 13 Washer 4
7Cushion 1
Tools
PARTS LIST:
M6

PART REQUIRED: 1 & 6
Keep the bolts loose.
PART REQUIRED: 1, 4 & 5
Keep the bolts loose.
STEP 1
X6
8
6
1
6
STEP 2
X8
9
1
5
4
4
6

PART REQUIRED: 2 & 3
Keep the bolts loose.
PART REQUIRED: 1, 2, 4 & 5
Keep the bolts loose.
STEP 3
X2
X2
13
11
12
12
11
13
STEP 4
X2
X2
X2
11
13
2
3
1
2
5
4
13
11
X2
10
10

PART REQUIRED: 7
Tighten all bolts. Finished!
Warranty
One-year limited warrantly.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.
STEP 5
7