Broyhill ARDENDALE A204006502 User manual

ASSEMBLY INSTRUCTIONS
ITEM#: A204006502
SKU#:810493306
ARDENDALE AW WICKER
2PK LOVESEATS
Need help? We are here for you! 1(866) 578-6569 24/7 · Toll Free

• Please read and understand this entire manual before attempting to assemble or install the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Do not place the product on a damp or conductive subsurface.
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
• Standing on or misuse of this sofa and side tables may result in damage and injury. Read and follow mfg. assembly
and use instructions. Not intended for commercial use.
• Keep all children and pets away from assembly area.
• Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
• Sofa Weight limit: 250 lbs per cushion, 500 lbs in total.
• Use the correct bolts as indicated. All bolts should be hand tight until the complete pieces is assembled (This will make the
assembly process much easier). Once the piece is fully assembled, then go back and tighten all bolts with provided tool.
WARRANTY:
WHAT IS COVERED?
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided
the item is maintained with care and used only for personal, residential purposes.
Warranty: 12 months
MAINTENANCE:
• Before using, clean the furniture completely with a soft dry towel.
• Do not use harsh abrasives or cleaners.
• When not in use, store in a cool, dry area and for best results always cover the chair with an outdoor cover.
2/18

EXPLODED DRAWING
3 /18

PARTS LIST
Label Part Number Description Qty Part Image
A P001500092 Chair Back 2
B P001400107 Left Arm 1
C P001400108 Right Arm 1
D P003800380 Left Panel 1
E P003800381 Right Panel 1
F P001600130 Seat Board 2
G P001800179 Seat Cushion 4
J P001700004 Back Cushion 4
K P005300057 Foot pad
Pre-assembled 8
4 /18

HARDWARE LIST
5 /18
Label Part Number Description Qty Add Part Image
H1 H010010087 Bolt M6*20 4 1
H2 H010010010 Bolt M6*25 16 2
H3 H010010009 Bolt M6*40 8 1
H4 H050010025 Flat washer
M6 28 3
HW H090010017 Wrench M6 2 0

HELPFUL HINTS
• Separating parts before starting
Provided in hardware pack
How many people are needed for installation?
6/18
Provided

EXPLODED DRAWING
7 /18

STEP 1
Assembled View:
8 /18
Attached Chair Back (A) to Left Arm
(B) with Bolt (H1) and Flat washer
(H4), tighten the Bolt (H1) to 80%
depth with Wrench (HW).
1x
1x 1x
1x

STEP 2
Assembled View:
9 /18
1x
4x 4x 8x
Attached Left Arm (B) to Chair Back
(A) with Bolt (H2) and Flat washer
(H4); attached Seat Board (F) to Chair
Back (A) with Bolt (H3) and Flat washer
(H4), tighten the Bolts (H2/H3) to 80%
depth with Wrench (HW).

STEP 3
Assembled View:
10 /18
Attached Chair Back (A) to Right
Panel (E) with Bolt (H1) and Flat
washer (H4), tighten the Bolt (H1) to
80% depth with Wrench (HW).
1x 1x
1x

STEP 4
Assembled View:
11/18
Attached Seat Board (F) and Chair
Back (A) to Right Panel (E) with Bolt
(H2) and Flat washer (H4), tighten all
the Bolts to 100% depth with Wrench
(HW) at last.
4x 4x

STEP 5
Assembled View:
2x
2x
12/18
Place the Seat Cushion (G) and Back
Cushion (J) on the Seat Board (F),
the product assembly is completed.

EXPLODED DRAWING
13/18

STEP 6
Assembled View:
14/18
Attached Chair Back (A) to Right
Arm (C) with Bolt (H1) and Flat
washer (H4), tighten the Bolt (H1) to
80% depth with Wrench (HW).
1x 1x
1x 1x

STEP 7
Assembled View:
15/18
Attached Right Arm (C) to Chair Back
(A) with Bolt (H2) and Flat washer (H4);
attached Seat Board (F) to Chair Back
(A) with Bolt (H3) and Flat washer (H4),
tighten the Bolts (H2/H3) to 80% depth
with Wrench (HW).
1x
8x 4x 4x

STEP 8
Assembled View:
16/18
Attached Chair Back (A) to Left Panel
(D) with Bolt (H1) and Flat washer
(H4), tighten the Bolt (H1) to 80%
depth with Wrench (HW).
1x 1x
1x

STEP 9
Assembled View:
Attached Seat Board (F) and Chair
Back (A) to Left Panel (D) with Bolt
(H2) and Flat washer (H4), tighten all
the Bolts 100% depth with Wrench
(HW) at last.
17/18
4x 4x

STEP 10
Assembled View:
1x
1x
18/18
Place the Seat Cushion (G) and Back
Cushion (J) on the Seat Board (F),
the product assembly is completed.