BullFrog IWAN OD1070 User guide

ASSEMBLY AND INSTRUCTION MANUAL
www.bullfrog-design.com
08.11.2021
Flexible backs in different sizes
to be placed on top
or for single use
MODEL OD1070 IWAN
© 2016 K URT BEI E R &KATI QU I N G E R
High-quality and soft seating comfort, can be placed individually or as a combi
For general informations please refer to the information about outdoor furniture!
Bullfrog recommends the suitable waterproofed protective covers for outdoor furnitures.

OD1070 IWAN
© 2016 K URT BEI E R &KATI QU I N G E R
Adjustment of back slant:
1. To adjust the desired position grip the back
from the outside and pull it carefully towards
yourself.
2. To obtain zero position pull the back carefully
beyond the top position towards yourself and fold
down into zero position (horizontal).
3. From zero position you can easily snap the back into desired position.
To adjust the upper back of model type 610, proceed the same way.
Use of back function

OD1070 IWAN
© 2016 K URT BEI E R &KATI QU I N G E R
1
2
A
B
1. Turn connector ratchet 1 of element A to the outside.
2. Firmly push together part A and B, until metal guides 2 catch into guides 1.
3. In case of dismounting lift part B with the metal guides 2 and pull away.
Element connectors
Attention!
Only at furnitures where connectors are pre-assembled (for an extra charge).