BullFrog 0917 ZAZA User guide

Removable armrest or stool Sofa with relax- and sleeping position
ASSEMBLY AND INSTRUCTION MANUAL
MODEL 0917 ZAZA
© 2017 K URT BEI E R &KATI QU I N G E R
www.bullfrog-design.com
Continuously motorised adjustment
up to reclining position

FUNKI - how it works:
3. Now you are able to move the upper
part backwards until the upper part of
the cushion will click into place in the
zero position.
1. Take the cushion at its upper side and
put the cushion on your knees with the
zipper on the bottom. The seamless side
faces you.
2. Move the upper part of the cushion
towards yourself until the final position
is reached.
4. Now put the cushion in the preferred position
(e.g. in the back, seamless side in front and
zipper at the bottom). By pulling the upper part
of the chushion towards yourself, you are now
able to choose among 16 raster positions,
however you like it.
seam
zipper
1. Turn connector ratchet 1 of element A to the outside.
2. Firmly push together part A and B, until metal guides 2 catch into guides 1.
3. In case of dismounting li part B with the metal guides 2 and pull away.
Mounting of connectors
0917 ZAZA
© 2017 K URT BEI E R &KATI QU I N G E R
AB
12

Adjustment of armrest:
Use of armrest function
1. To adjust the desired position grip the armrest from the outside and pull it carefully
towards yourself.
3. From zero position you can easily snap the armrest into desired position.
2. To obtain zero position pull the armrest carefully beyond the top position towards
yourself and fold down into zero position
To adjust back of folding stool, proceed the same way.
0917 ZAZA
© 2017 K URT BEI E R &KATI QU I N G E R

Sitting
1. Connect cable A (fixed at seat element) to provided transormer and plug it into socket.
2. Press button B and C at remote control to move seat continuously up to relax position.
The upholstery moves forwards or backwards.
TRANSFORMER
A
Power supply
TRANSFORMER
AATTENTION!
TRANSFORMER HAS TO
BE SITUATED OUTSIDE
OF THE SOFA!
Motorised seat adjustment:
Relax position
Stool or armrest
C
B
Attention! Don´t sit down on functional back or functional armrest. Except they are at lowest position. The maximum
load is approx. 120 kg.
0917 ZAZA
© 2017 K URT BEI E R &KATI QU I N G E R

0917 ZAZA
© 2017 K URT BEI E R &KATI QU I N G E R
Delivery condition: already synchronised November 2021
B
C
A
Motorised seat adjustment - Programming of transmitter and receiver
Transmitter
Brief instruction, Pairing-Method:
Should a new start-up of remote control be necessary the wireless communication
with the control/motor must be established. Proceed as follows:
The programming is completed, the transmitter is now ready for operation. If the motor doesn´t start while
pressing, release the button and press again. If necessary retry the process.
Put drive systems into operation successively, don`t operate several systems simultaneous.
Otherwise the remote control cannot be assigned clearly by control/motor.
Receiver
LED
1. Press pairing buttons A at receiver 2 x until the
LED indicates. The pairing process is active for
about 10 seconds.
2. Press simultaneous button Band Cat the transmitter
until the green LED at the receiver vanishes. This
confirmes a successful pairing process.
Note: For the pairing prozess the distance between
transmitter and receiver should be less than 2
metres.
The programming is completed, the transmitter is
now ready for operation. If the motor doesn´t start
while pressing, release the button and press again. If
necessary retry the process.
Keep all documents relating to the purchase of your furniture carefully, even beyond the legal warranty period of 2 years. You will
find all important information in your product folder and also on our website www.bullfrog-design.com