BullFrog OD1520 LAGOON User guide

Braided back, available in
“nature” or “black”
Practical throw pillow
for individual comfort
A practical stool
adapted to the sofa
ASSEMBLY AND INSTRUCTION MANUAL
www.bullfrog-design.com
MODEL OD1520 LAGOON
© 2020 K URT BEI E R &KATI QU I N G E R
For general informations please refer to the information about outdoor furniture!
Bullfrog recommends the suitable waterproofed protective covers for outdoor furnitures.

FUNKI - How ist works:
1. Take the cushion at its upper side and
put the cushion on your knees with the
zipper on the bottom. The seamless side
faces you.
2. Move the upper part of the cushion
towards yourself until the final position is
reached.
4. Now put the cushion in the preferred
position (e.g. in the back, seamless side
in front and zipper at the bottom). By pulling
the upper part of the chushion towards
yourself, you are now able to choose
among 16 raster positions, however you
like it.
3. Now you are able to move the upper
part backwards until the upper part of the
cushion will click into place in the zero
position.
seam
zipper
OD1520 LAGOON
© 2020 K URT BEI E R &KATI QU I N G E R

Safety note:
ATTENTION!
In order to prevent damage, don`t move or li the furniture at braid or back. In case of transport, it is
absolutely necessary to li up the furniture from below.
Don`t pull
at frame!
Don`t li or pull
at braid!
Always li from
below!
X
X
Keep all documents relating to the purchase of your furniture carefully, even beyond the legal warranty period of 2 years. You will
find all important information in your product folder and also on our website www.bullfrog-design.com
OD1520 LAGOON
© 2020 K URT BEI E R &KATI QU I N G E R

Disassembly, transport protection:
Info:
2. Tilt the element forwards. Use a suitable support to avoid damage to the cover or your floor.
3. Unscrew the 4 screws (h) from the transport protection (E). Remove the transport protection
(E) by liing the element slightly and pulling the transport protection (E) away to the side.
ATTENTION! To ensure secure assembly, please observe the individual steps of instruction!
The furniture should always be mounted in pairs (2 persons)!
1. Position the elements at the place supposed to stay and remove the foil and the cardboard.
4. Place the element back on its feet.
h
h
h
h
OD1520 LAGOON
© 2020 K URT BEI E R &KATI QU I N G E R