Burkert Type MS01 User manual
Operating Instructions
Type MS01
pH sensor cube
We reserve the right to make technical changes without notice.
Technische Änderungen vorbehalten.
Sous réserve de modifications techniques.
© Bürkert SAS, 2014 - 2020
Operating Instructions 2011/01_EU-ML 00566496 Original EN
3
Contents
1 ABOUT THE DOCUMENT .....................................................................................................................9
1.1 Symbols used .............................................................................................................................. 9
....................................................................................................9
.....................................................................................................9
.........................................................................................................10
2 INTENDED USE ...................................................................................................................................10
3 BASIC SAFETY INFORMATION ..........................................................................................................11
4 GENERAL INFORMATION ...................................................................................................................12
...............................................................12
..................................................................................................................12
.......................................................................................................12
5 DESCRIPTION .....................................................................................................................................13
......................................................................................................................................13
..................................................................................................................................14
.............................................................................................................................14
...........................................................................................................15
6 TECHNICAL DATA ...............................................................................................................................16
......................................................................................................................16
..................................................................................16
.............................................................................................16
................................................................................................................................... 16
....................................................................................................................17
...........................................................................................................................17
.........................................................................................................................17
7 INSTALLATION .....................................................................................................................................18
....................................................................................................................18
.................................................................................18
Type MS01
English
4
Contents
8 COMMISSIONING ...............................................................................................................................19
....................................................................................................................19
..........................................................................................19
9 ADJUSTMENT .....................................................................................................................................20
....................................................................................................................20
.............................................................................20
.............................................................................................. 20
........................................................................................................21
..................................................................................................22
10 PH SENSORPARAMETER .............................................................................................................23
.
23
.........................................................24
.......................................................24
...............................................................................25
...............................................................26
.......................................................27
...........................................................28
10.7.1 Manual freeze ............................................................................................................28
10.7.2 Automatic freeze ........................................................................................................29
10.7.3 Change the binary event for the automatic freeze .....................................................31
......................................................................31
...................................................................32
........................................................................................................................................32
11 PH SENSORDIAGNOSTICS ...........................................................................................................33
12 PH SENSORMAINTENANCE .........................................................................................................34
.....................................................................................................34
12.1.1 Manually calibrate the pH sensor ..............................................................................34
12.1.2 1-point calibration procedure of the pH sensor .........................................................35
English
5
12.1.3 2-point calibration procedure of the pH sensor .........................................................40
12.1.4 ConnecttheTypeMZ15calibration-and-cleaningtooltotheType8905systemthat
hasnoTypeME21touchscreeen ..............................................................................45
.............................................................................46
.................................................................................................................47
.................................................48
.........................................................................................................48
............................................49
............................................................................................................................49
13 GENERAL SETTINGSPARAMETER ..............................................................................................50
...................................................................................................50
.............................................................................................51
..........................................................................................51
.......................................................................................52
......................................................................52
..................................................................................53
................................53
........................................53
........54
..............................54
............................................................................................55
...........................................................56
..................................................................................57
14 GENERAL SETTINGSDIAGNOSTICS ...........................................................................................58
..........................................................................................58
................................................................................58
...............................................................................................................59
..............................................................................59
...........59
English
Type MS01
6
............................................................................59
.........59
.......................................................................................59
...... 60
......................................................................................................60
15 GENERAL SETTINGSMAINTENANCE ..........................................................................................62
...................................................................................................................62
................................................................................. 62
16 PROCESS DATA OBJECTS .................................................................................................................63
.....................................................................................................................63
.........................................................................................................................63
...............................................................................................63
17 MAINTENANCE ...................................................................................................................................65
....................................................................................................................65
............................................................................65
.........................................................65
.....................................................................................................................66
.....................................................................69
..............................................................................70
.................................................................................. 70
...................................................................70
18 TROUBLESHOOTING ..........................................................................................................................71
..................................................................................................71
..............................................................71
18.2.1 Measured pH values seem to be wrong ....................................................................71
18.2.2 MeasuredpHvaluesuctuate ...................................................................................73
................................................................... 73
English
Type MS01
7
19 TROUBLESHOOTING WITH MESSAGES ...........................................................................................74
...........................................................................74
19.1.1 Message .........................................................................................74
19.1.2 Message .......................................................................................74
19.1.3 Message ...............................................................75
19.1.4 Message ..............................................................................75
...............................................................................................75
19.2.1 Message ...........................................................................75
19.2.2 Message .....................................................................................75
........................................................................................76
19.3.1 Message ......................................................................................76
19.3.2 Message .....................................................................................76
19.3.3 Message ......................................................................76
19.3.4 Message ....................................................................76
19.3.5 Message .......................................................77
19.3.6 Message .....................................................77
19.3.7 Message ................................................................77
19.3.8 Message ...............................................................78
19.3.9 Message .................................................................................78
19.3.10 Message ...............................................................................78
19.3.11 Message ................................................................78
19.3.12 Message ...............................................................79
19.3.13 Message .................................................79
19.3.14 Message ................................................79
19.3.15 Message ...........................................................80
19.3.16 Message .........................................................80
....................................................................................81
19.4.1 Message ...........................................81
19.4.2 Message ...................................................................81
...................................................................................................81
19.5.1 Message ................................................ 81
English
Type MS01
8
20 SPARE PARTS AND ACCESSORIES ..................................................................................................82
.................................................................................................................83
22 STORAGE ............................................................................................................................................84
......................................................................84
............................................................................84
..............................................................................................................................84
23 DISPOSAL OF THE PRODUCT ...........................................................................................................85
English
Type MS01
9
About the document
1 ABOUT THE DOCUMENT
The document describes the entire life cycle of the product. Please keep the document in a safe place,
accessible to all users and any new owners.
document
Failure to comply with the Operating Instructions can lead to hazardous situations.
▶The document must be read and understood.
1.1 Symbols used
Danger
▶Failure to observe this warning can result in death or in serious injury.
Warning
▶Failure to observe this warning can result in serious injury or even death.
Caution
▶Failure to observe this warning can result in substantial or minor injuries.
notiCe
▶Indicates an instruction to be carried out to avoid a danger, a warning or a possible risk.
→Indicates a work step to be carried out.
Indicatestheresultofaspecicinstruction.
Identiesatextofauserinterface.
1.2
Theterm"product"usedwithintheseOperatingInstructionsalwaysreferstotheTypeMS01pHsensor
cube.
1.3
Theterm"system"usedwithintheseOperatingInstructionsalwaysreferstotheType8905OnlineAnalysis
System.
English
Type MS01
10
About the document
1.4
Theterm"büS"usedintheOperatingInstructionsreferstotheindustrialcommunication,developedby
Bürkert,basedontheCANopenprotocol.Theterm"büS"referstotheBürkertsystembus.
→FormoreinformationonbüS,readthecablingguideavailableinEnglishandGerman(Cabling_guide_
for_büS_networks.pdf)atcountry.burkert.comsearchfor"GuideforplanningbüSnetworks".
→For more information on CANopen which is related to the device, refer to the Operating Instructions
"CANopenNetworkconguration"atcountry.burkert.com.
2 INTENDED USE
▶TheproductisintendedsolelyforthemeasurementofthepHinwaterwithinaType8905system.
▶This product must be protected against electromagnetic interference, ultraviolet rays and, when installed
outdoors,theeectsofclimaticconditions.
▶This product must be used in compliance with the characteristics and commissioning and use condi-
tionsspeciedinthecontractualdocumentsandintheOperatingInstructions.
▶Requirements for the safe and proper operation of the product are proper transport, storage and instal-
lation, as well as careful operation and maintenance.
▶Only use the product as intended.
▶Observeanyexistingrestraintswhentheproductisexported.
English
Type MS01
11
Basic safety information
3 BASIC SAFETY INFORMATION
This safety information does not take into account any contingencies or occurrences that may arise during
installation, use and maintenance of the product.
Theoperatingcompanyisresponsiblefortherespectofthelocalsafetyregulationsincludingstasafety.
To avoid injury take care:
▶to prevent any unintentional power supply switch-on.
▶tocarryouttheinstallationandmaintenanceworkbyqualiedandskilledstawiththeappropriate
tools.
▶to use the product only if in perfect working order and in compliance with the instructions provided in
these Operating Instructions.
▶to observe the general technical rules during the planning and use of the product.
▶nottousethisproductinexplosiveatmospheres.
▶not to use this product in an environment incompatible with the materials from which it is made.
▶nottomakeanyexternalorinternalmodicationstotheproduct.
notiCe
•This product contains electronic components sensitive to electrostatic discharges. They may be
damaged if they are touched by an electrostatically charged person or object. In the worst case sce-
nario, these components are instantly destroyed or go out of order as soon as they are activated.
•To minimise or even avoid all damage due to an electrostatic discharge, take all the precautions
describedintheEN61340-5-1norm.
•Also ensure that you do not touch any of the live electrical components.
English
Type MS01
12
General information
4 GENERAL INFORMATION
4.1
To contact the manufacturer of the product use following address:
BürkertSAS
RueduGiessen
BP 21
F-67220TRIEMBACH-AU-VAL
YoumayalsocontactyourlocalBürkertsalesoce.
TheaddressesofourinternationalsalesocesareavailableontheInternetat:country.burkert.com
4.2
The condition governing the legal warranty is the conforming use of the product in observance of the operating
conditionsspeciedintheOperatingInstructions.
4.3
YoucanndtheOperatingInstructionsandtechnicaldatasheetsforTypeMS01at:country.burkert.com
English
Type MS01
13
Description
5 DESCRIPTION
5.1
TheTypeMS01pHsensorcubeisusedintheType8905system.
TheelectricalanduidconnectionsaremadeviathebackplaneoftheType8905system.
Bayonet lever to:
-lock / unlock the product.
-carry out maintenance operations.
Unlockedposition
Lockedposition
Maintenance position
Push-button with
measured process
variable
Fluid connections
Electricalinterface
Pin
Adaptation pins
Housing of the reference
electrode
Product-status indica-
tor
Slotforthe
memory card
Fig.1: Descriptionoftheproduct
English
Type MS01
14
Description
5.2 Type label
MS01 - pH and temperature
Range: pH 5 ... 9
IP65 PN03
Temperature: 3 ... 40°C
00567624 S/N 1564
W46AL
1
2
4
5
7
6
3
8
9
F-67220 Triembach
Made in France
1. Protection rating
2. Type of the product and measured quantities
3. Measurement range
4. Water sample pressure
5. Water sample temperature
6. Serialnumber
7. Manufacturing code
8. Product article-number
9. Conformity marking
Fig.2: ExampleofTypelabel
5.3
notiCe
▶Ifthememorycardisdefectiveorlost,thenbuyanewmemorycardfromyourBürkertsalesoce.
The product is delivered with a memory card that is inserted in the product.
At product start-up, there are two possibilities:
•Ifproduct-specicdataisstoredontheinsertedmemorycard,theproductadoptsthedata.Atproduct
delivery,thememorycardcontainsproduct-specicdata.
•If the inserted memory card is empty, the product loads its own data on the memory card. A new memory
card is empty.
ThedataonthememorycardcanbetransferredtoanotherproductTypeMS01.Forexample,thedatacan
be transferred from a defective product to a new product. The memory card transfers the following data:
•theuserparameters,exceptthecalibrationparameters,whicharespecictoeachproduct.
•the unique device name of the product. The unique device name permits to link the product to others
devicesthatareconnectedtotheeldbus.Refertochpt.13.4.
English
Type MS01
15
Description
5.4
Theproduct-statusindicatorchangesitscolourandstatebasedontheNAMURNE107recommendation.
Refer to Table1. The colour of the product-status indicator shows whether the product-internal diagnostics
areactiveorinactive.Iftheproduct-internaldiagnosticsareactiveanddierentproductstateshavebeen
generated, the colour of the product-status indicator shows the product state with the highest priority.
Iftheproduct-statusindicatorashes,thentheproductisselectedinaman-machineinterfacesuchasthe
Bürkert Communicator software.
Table1: Product-statusindicator-ColoursandstatesinaccordancewithNAMURNE107,edition2006-06-12
•Product status changes
are not shown.
•Messages are neither
listed nor transmitted via
anyconnectedeldbus.
White 0 - Diagnostics are inactive.
•Product status is shown
by the color of the
device status indicator.
•Messages are listed and
possibly transmitted via
anyconnectedeldbus.
Green 1 - Diagnostics are active and no
event has been generated.
Blue 2 Maintenance
required
The device continues to measure
but a function is temporarily
restricted.
→Do the required maintenance
operation.
Yellow 3 Out of
specication
The ambient conditions or
process conditions for the device
are outside the permitted ranges.
Device internal diagnostics point
to problems in the device or with
the process properties.
Orange 4 Function
check
Ongoingworkonthedevice(for
example,checkingthecorrect
behaviour of the outputs by
simulatingmeasurementvalues);
the output signal is temporarily
invalid(e.g.frozen).
Red 5 Failure, error,
malfunction
Due to a malfunction of the
device or its periphery, the
measured values can be
incorrect.
English
Type MS01
16
Technical data
6 TECHNICAL DATA
6.1
Ambient temperature +0...+40°C
Air humidity < 90 %, without condensation
Protection rating according to
EN60529
•IP65, when plugged in the backplane
•IP20, as standalone product
Max.heightabovesealevel 2000m
6.2
TheproductconformstotheCEdirectivesoftheType8905system,onlywhentheproductispluggedin
theType8905system.
6.3
Housing PPE,PPS
Seal EPDM
Lever Zamakpainted
6.4
•Typeofuid
•pH value
•Water, without particles: drinking water, industrial
water
•pH5...pH9
Minimalowrate >6l/h
Water sample pressure PN3
Water sample temperature +3...+40°C
Water sample conductivity >100µS/cm
English
Type MS01
17
Technical data
6.5
pH measurement
•Measuring range
•Sensorresolution
•Measurementdeviation("measurementbias",as
denedinthestandardJCGM200:2012)
•Linearity
•Repeatability
•Responsetime(t90)
•Measurement sensor
•Electrolyteofthereferenceelectrode
•pH5...pH9
•pH 0.02
•pH ±0.1
•pH ±0.05
•pH ±0.05
•<10s
•ISFET
•3 mol KCl
Temperature measurement
•Measuring range
•Measurement sensor
•+0...+50°C
•Pt1000ClassB,nocontactwiththewatersample
Maintenance interval of the reference electrode 12 months, nominal, depending on the water quality
6.6
Operating voltage 24VDCthroughthebackplaneoftheType8905
system
Power consumption 0.8VA
6.7
Internal communication throughbüS
Externalcommunication Product-statusindicatoraccordingtoNAMURNE107
English
Type MS01
18
Installation
7 INSTALLATION
7.1
notiCe
•Theelectricalanduidicinstallationscanonlybecarriedoutbyqualiedandskilledstawiththeappropriate
tools.
•Respect the installation instructions for the system.
notiCe
•Shutdownandisolatetheelectricalpowersourcebeforecarryingoutworkonthesystem.
notiCe
•Protect the product against electromagnetic interference, ultraviolet rays and, when installed outdoors,
theeectsoftheclimaticconditions.
7.2
TheproductispluggedinthebackplaneoftheType8905system.
4
3
3
Backplane
1. Dry the surface of the back-
plane that will be in contact
with the product.
2. Dry the surface of the product.
3. While the push-button is
pushed, turn the bayonet lever
to the right, on the unlocked
position, . Do not push
the lever to the maintenance
position.
4. Insert the two adaptation pins
in their holes and then plug the
product in the backplane.
5. While the push-button is
pushed, turn the bayonet
lever to the left, on the locked
position, .
Fig.3: Mountingaproductonthebackplaneofthesystem
English
Type MS01
19
Commissioning
8 COMMISSIONING
8.1
notiCe
•Beforecommissioning,makesurethatthestainchargehavereadandfullyunderstoodthecontents
of these Operating Instructions.
•In particular, observe the safety recommendations and intended use.
•Theproductandtheinstallationmustonlybecommissionedbysuitablytrainedsta.
8.2
1. Lettheuidowthroughthesystem.Makesurethatthesystemistight.
2. Energizethesystem.
3. Lettheuidowthroughthesystemforatleast12hours.Observingthistimemakessurethatthe
product and the system operate properly and that the measurements are stable.
4. Check that the process values are measured correctly. If the process values are not correctly
measured, use one of the following procedures to calibrate the product:
•calibrationoftheosetvalue.Refertochpt.12.1.2.
•calibrationoftheosetvalueandoftheslopevalue.Refertochpt.12.1.3.
English
Type MS01
20
Adjustment
9 ADJUSTMENT
9.1
notiCe
•The operators in charge of adjustment must have read and understood the contents of these Operating
Instructions.
•The operators in charge of adjustment must have read and understood the contents of the Operating
InstructionsoftheTypeME21displaysoftwareand/orthecontentsoftheOperatingInstructionsofthe
softwareType8920BürkertCommunicatorand/ortheOperatingInstructionsoftheTypeME25con-
troller module.
•In particular, observe the safety recommendations and intended use.
•Theproductandtheinstallationmustonlybeadjustedbysuitablytrainedsta.
notiCe
•The operators in charge of operation must have read and understood the contents of these Operating
Instructions.
•In particular, observe the safety recommendations and intended use.
•Theproductandtheinstallationmustonlybeoperatedbysuitablytrainedsta.
9.2
The adjustments can be made with the following tools:
•aPCwiththesoftwareType8920BürkertCommunicatorandthebüSstick.Togetgeneralinformation
abouttheType8920software,refertotheOperatingInstructionsoftheType8920.
•theTypeME21touchscreenoftheType8905system.TogetgeneralinformationabouttheTypeME21
touchscreen,refertotheTypeME25OperatingInstructionsthatareavailableontheCDdeliveredwiththe
system and that are also available at country.burkert.com.
TheseOperatingInstructionsdescribetheproduct-specicadjustmentsthataremadewiththeTypeME21
touchscreen.
9.3
The user interface contains:
•desktop views
•a trend view
•a help view
•a device view.
Thedesktopviews,thetrendviewandthehelpviewaredescribedindetailintheTypeME25Operating
Instructions.TheTypeME25OperatingInstructionsgivealsogeneralinformationonthesoftware.The
TypeME25OperatingInstructionsareavailableontheCDthatisdeliveredwiththeproductandatcountry.
burkert.com.
English
Type MS01
Table of contents
Other Burkert Accessories manuals
Burkert
Burkert 8020 User manual
Burkert
Burkert 2510 User manual
Burkert
Burkert GENERIC 8400 User manual
Burkert
Burkert 8220 User manual
Burkert
Burkert S030 User manual
Burkert
Burkert 8694 User manual
Burkert
Burkert 8170 User manual
Burkert
Burkert 8020 Low Power Installation and operating instructions
Burkert
Burkert 8741 User manual
Burkert
Burkert 8020 User manual
Burkert
Burkert S070 User manual
Burkert
Burkert MS09 User manual
Burkert
Burkert SE30 Ex Namur User manual
Burkert
Burkert 8030 HT User manual
Burkert
Burkert MS06 Series User manual
Burkert
Burkert 8685 User manual
Burkert
Burkert 8030 User manual
Burkert
Burkert FULLBORE S056 User manual
Burkert
Burkert 8007 User manual
Burkert
Burkert FULLBORE S055 User manual
Popular Accessories manuals by other brands
Arizona AirScent
Arizona AirScent DREAMER Series product manual
Viking
Viking SL-2 product manual
Byron
Byron SX-6 Installation and operation instruction
Omicron
Omicron DATALOG X-PRO 1.0 user manual
PCB Piezotronics
PCB Piezotronics IMI SENSORS 640B72 Installation and operating manual
Manitowoc
Manitowoc K00133 installation instructions
