Burrow OPERA User manual

OPERA
Assembly Instructions

32
Parts and hardware Thanks for bringing Burrow into your home.
Everything we make is incredibly simple to
set up, including your new media console.
We recommend having an extra set of
hands to help out, so be sure to grab a
friend before you get started.
1 x
Top panel
1 x
Bottom panel
1 x
Right sidepanel
1 x
Left side panel
1 x
Interior partition
2 x
Back panels
2 x
Shelves
1 x
Right door
1 x
Left door
4 x
Corner legs
1 x
Center leg
8 x
Shelf pins
7 x
Wood screws
1 x
Ratchet screwdriver
3
Gather both side panels. Check the
stickers to identify which side is which, then
insert the tabs on right side panel into the
corresponding slots on the top panel, then
firmly push the panel toward the tracks to
lock it in place.
4
Take the interior partition and insert it into
the middle slots, with the open side of the
L-shape facing the tracks, andfirmly push to
lock it in place.
1
Lay the top panel upside-down on a soft
surface, like a carpet orthe flattened
cardboard box. The edge with the tracks is
the front side.
2
Screw all eight shelf pins into the inserts on
the side panels and partitionbefore setting
up anything else.

54
7
Take thebottom panel,flip it upside-down,
and fit the tabs on the side panels and
partitioninto the slots on the bottom panel.
Firmly push the bottom panel backward,
toward the back panels, to lock itin place.
8
Gather the woodscrews and use the ratchet
screwdriver to insert them into all of the pre-
drilled holes on the bottom panel.
5
Repeat the same process for the left side
panel, and make sure all three panels are
flush with back edge of top panel.
6
Slide the back panels, pin-edge first, into
the grooves on the side panels and interior
partition. Fit the pins into the holes on the
top panel.
11
Take the shelves, slide them inside either
half of the unit, and lower the notches over
the pins.
9
Grab all five legs and twist them into the
inserts on the bottom panel. The center
leg is slightly thinnerand shorter, and
offers additional support once you’ve
10
With apartner, flip the media console upright.
loaded up the console. The corner legs, as
you can probably guess, goin each of the
four corners.
Tip: Twist the foot of the leg to adjust
height and compensate for uneven floors.

76
12
Grab the right door. As a reminder: right
and left are determined by your orientation
when looking at the front of the console,
but they’re marked with stickers for your
convenience. Orient the door so that the
two handles are closer to the middle of the
13
Repeat for the left door.
14
You’re all set! The doors slide open to
provide full access to the interior, and the
slatted design means they’re acoustically
transparent, making that shelf the perfect
placefor a sound bar.
unit,tilt it down to fit the bottom pins into
the hole on outer edge and track first, then
depress the spring-loaded top pins to fit
them underneath the top panel and into the
top track. Be careful not to pinch yourfingers
in the middle hinge ofthe door.

Need help?
Feel free to contact us via email or text
if you have any specific questions!
In the USA:
[e-mail]
[phone]
In Canada:
[e-mail]
[phone]