Bush WO378 User manual

Instruction manual
WO378

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
You’ll soon be enjoying your new CD Micro HiFi All in One System.
It all begins here, with your instructions. Don’t worry, there’s
nothing too technical coming up. Just simple, step-by-step
guidance to get you up and running quickly. Sound good? Then
let’s get started.
Help and Guidance
We’re here to help you get the most from your CD Micro HiFi All in One Micro System.
Should you require any guidance, a simple solution can often be found online at:
www.bush-support.com
If you still require further assistance, call one of our experts on 0345 600 3021.

3
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021
Contents
1 Safety information
Power source 8
Moisture and water 8
Heat sources and flames 8
Ventilation 8
Positioning the CD Micro HiFi All in One Micro System 9
General safety information 9
2 Getting to know your CD Micro HiFi
Power connection 17
Initial set-up 17
Change the mode 17
Adjusting the volume 17
Equaliser or EQ setting 18
Using the Menu 18
3 Using your CD Micro HiFi
DAB radio mode 22
Telescopic radio aerial 22
Changing DAB stations 22
Scanning for DAB stations 22
Prune DAB stations 23
Storing a DAB station preset 23
Tune to a DAB station preset 24
DAB display information 24
Dynamic range control (DRC) 25
FM Radio mode 26

4
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting.
Contents
Telescopic radio aerial 26
Tuning to an FM station 27
Changing the scan setting 27
Audio mode 28
Storing an FM station preset 28
Tune to an FM station preset 29
FM display information 29
Bluetooth mode 30
Connect to a Bluetooth device 30
Listening to Music/Audio using Bluetooth 31
Controls available on your HiFi are: 31
Delete current Bluetooth device 32
CD Mode 32
Play a CD 32
CD controls 32
Programmed play mode 33
Random/Repeat mode 34
Remove the CD 34
Caring for compact discs 34
Auxiliary Input mode 35
Setting an alarm 36
Stop the Alarm 36
Snooze 37
Sleep timer 37

section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
Contents
4 Other information
Technical specification 40
5 Product support
Troubleshooting 44
Help and assistance 46
Disposal 47
Your Bush Guarantee 48
Important Data Protection Information 48

This page is left intentionally blank

1Safety information

Safety information8
Safety information
Important - Please read these instructions fully before
installing or operating
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Power source
• Only use the power supply that came with the product. Using an unauthorised power
supply will invalidate your guarantee and may irrecoverably damage the product.
• Disconnect your HiFi from the mains power supply during thunderstorms.
• Always check that you have completely switched off your HiFi System, before you
change or disconnect the power supply.
• Where the mains power plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
• If the HiFi System will not be used for a long period of time, remove the CD and make
sure that the mains power is unplugged.
Moisture and water
• Do not leave it in low temperatures as moisture can form inside the product, which
may damage the circuit board.
Heat sources and ames
• Do not leave it in high temperatures as electronic devices and plastic parts may warp
in heat.
• Keep it away from bright sunlight or heat sources, such as a radiator.
• No naked flame sources, such as lit candles, should be placed on or near the product.
Ventilation
• Do not block or cover slots, holes or openings on the product by placing on soft
furnishings such as carpets, rugs or beds as these are provided for functionality and/or
ventilation to ensure safe operation of the product.
• The underneath and sides of this product may become warm after a long period of
use. This is normal.

Safety information
Important - Please read these instructions fully before
installing or operating
Safety information 9
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
Positioning the CD Micro HiFi All in One Micro System
It is important that you consider carefully in advance where your HiFi System will be
situated and make sure that it is:
• on a flat and stable surface.
• within 1.4 metres of a power socket. Please ensure that the mains power lead is not a
trip hazard.
• at least 1 metre away from other electrical appliances to avoid interference.
• where it will be in range of the connected or ‘paired’ bluetooth device (e.g. iPod/
iPhone/iPad/Android/other phone/computer, which is about 10 metres or less (33 feet
or less) in line of sight.
• where there is enough height for the HiFi System telescopic radio aerial.
• Never place your HiFi System directly onto antique or polished surfaces.
CAUTION: To avoid possible hearing damage, do not listen to this HiFi System
at high volume levels for long periods of time. Always keep the volume within
reasonable limits.
General safety information
• Keep the product and all its parts out of reach of small children.
• This product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning the use of the appliance
by a person responsible for their safety.
• Do NOT place foreign objects into the CD compartment.
• CAUTION: Never touch or look into the optical lens within the CD compartment.

Safety information
Important - Please read these instructions fully before
installing or operating
Safety information10
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
This is a CLASS-1 laser product.
Use of controls or adjustments other than those specified herein, may result
in hazardous laser light beam exposure. Do NOT open the cover and do NOT
attempt to repair it yourself. Refer servicing to qualified personnel. This product
does not contain any user serviceable parts. Unauthorised handling of the device
may damage it and will void your warranty.

This page is left intentionally blank
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.

This page is left intentionally blank

Getting to know your CD Micro
HiFi 2

Getting to know your CD Micro HiFi
You’ll be up and running in no time
Getting to know your CD Micro Hi-Fi
14
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Fig 1.
1
Fig 2.
2 3 4 5 6 7
8 9 10 11 12 13 14
15 16
17

Getting to know your CD Micro HiFi
You’ll be up and running in no time
Getting to know your CD Micro Hi-Fi 15
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
1. Eject (CD mode)
2. Random/Repeat (CD mode)
3. Skip back
4. Skip forward
5. Stop
6. Play/Pause
7. CD slot
8. Backlit colour display
9. Standby (On/Off)
10. Mode (DAB/FM/BT/CD/Aux)
11. Menu/Info (Radio station information)
12. Preset (40 DAB/40 FM)
13. Vol-
14. Vol+
15. Headphone socket
16. Navigate / Press to Select / Press to
Snooze
17. Speakers
18. Telescopic aerial
19. On/Off switch
20. Aux in
21. Power socket
DC 6VAUX INON/OFF
Fig 3.
18 19 20 21

Getting to know your CD Micro HiFi
You’ll be up and running in no time
Getting to know your CD Micro Hi-Fi
16
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Standby (On/Off)
Skip back
Menu/Info
Scan (DAB/FM)
Alarm settings
Bluetooth pairing
Change the Mode
Play/Pause
Select/Confirm
Presets
Sleep timer
Mute the sound
Eject the CD
Skip forward
Stop
Repeat/Random
Volume up
Volume down
Fig 4.

Getting to know your CD Micro HiFi
You’ll be up and running in no time
Getting to know your CD Micro Hi-Fi 17
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
Power connection
1. Fully extend the telescopic radio aerial on the back of the HiFi to receive the best
possible radio reception and sound quality.
2. Plug the mains power plug into the mains power wall socket and switch on. Slide the
ON/OFF switch on the back of the HiFi to ON.
3. The BUSH logo is displayed followed by the Language display options available with
‘English’ highlighted. Use the rotary navigation control to scroll to the display language
you would like and then press the navigation control to Select.
4. Your HiFi will go to Standby mode with a clock display.
Initial set-up
Press and release the Standby button on the front of your HiFi System. The first time you
switch on your HiFi or if the station list is empty, your HiFi will automatically begin to scan
for DAB radio stations. A progress bar will show the progress of the scan and the number
of stations found during the scan will also be displayed.
When the scan is complete your HiFi will select the first available station and begin to play.
Stations are listed in numerical and then alphabetical order by default.
Change the mode
Press and release the Mode button to change between DAB radio, FM radio, Bluetooth,
CD and Aux in modes. Please check the display, which will confirm the mode.
Adjusting the volume
Use the Vol- and Vol+ buttons to adjust the volume, there are 32 volume levels available.
Check the display, which will confirm the volume setting.

Getting to know your CD Micro HiFi
You’ll be up and running in no time
Getting to know your CD Micro HiFi
18
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Equaliser or EQ setting
You can change the sound of your HiFi using the EQ setting.
1. Press and hold the Menu button. Use the rotary navigation control to scroll to System
Settings and press to Select.
2. Use the rotary navigation control to scroll to Equaliser and press to Select. The EQ
options will be displayed.
3. Use the rotary navigation control to scroll up and down the options available.
4. When the EQ option you would like is highlighted, press the rotary navigation control
on the HiFi to Select.
5. Press and release the Menu button until you exit from the Menu.
Using the Menu
You can change the System settings, such as the Backlight brightness and timeout,
manually set the time and date, change the time format and display language for your
HiFi, as well as setting an Alarm or a Sleep time within the Menu, under System settings.
1. Press and hold the Menu button. Use the rotary navigation control to scroll to System
Settings and press to Select.
2. You can now use the rotary navigation control to scroll and push to select to change
the System Settings on your HiFi.
3. Press and release the Menu button until you exit from the Menu.
Using headphones
You can connect headphones with a 3.5mm plug (not included) into the socket on the
front of the HiFi. When you have headphones connected the HiFi speakers are switched
off and all sound is via the headphones.
Note: Always keep the volume within reasonable limits.

Getting to know your CD Micro HiFi
You’ll be up and running in no time
Getting to know your CD Micro HiFi
19
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
Connect to a Bluetooth device
Check that your HiFi is in Bluetooth (BT) mode. If you are not already in BT mode, press
and release the Mode button until you are in BT mode (check the display). ‘Bluetooth
Searching’ will be displayed, whilst your product searches for Bluetooth devices.
In Bluetooth (BT) Mode:
1. ‘Bluetooth Searching’ will be displayed whilst your product searches for Bluetooth
devices.
2. On the device that you would like to connect to your HiFi via Bluetooth (e.g. iPhone/
iPad/Android/other phone/Tablet/Computer), turn on Bluetooth connectivity and
ensure that it is ‘discoverable’.
Note: If necessary, refer to the instructions for your device to add or set up Bluetooth.
3. Select to ‘Add new device’, if necessary.
Note: Some products will automatically search for a new device and so the ‘Add new
device’ option is not available.
4. When found, your HiFi will be displayed as ‘BUSH WO378’. Select the device name to
begin pairing.
5. When pairing is complete ‘Bluetooth Connected’ will be displayed.
6. Now that you have paired your device with the HiFi, it will connect to it when it is
within range, which is about 10 metres or less (33 feet or less), line of sight.
7. Your device will remain paired with the HiFi unless you decide to disconnect or ‘unpair’
it.

This page is left intentionally blank