Bushnell Equinox Z 260501 User manual

INSTRUCTION MANUAL Model #s: 260500 / 260501
03-15
2x40 / 4x50
DIGITAL NIGHT VISION
BINOCULARS

2

3
ENGLISH 416
FRANÇAIS 1830
ESPAÑOL 3244
DEUTSCH 4658
ITALIANO 6072

4
QUICK START GUIDE
(Please Refer to “PARTS & CONTROL GUIDE” - Next Page)
1) LOAD BATTERIES (for more details, see pg. 9)
The battery compartment is below the IR light housing.
Unscrew IR light (D)counterclockwise and insert batteries.
2) REMOVE LENS COVER, POWER ON (for more details, see pg. 9)
The power switch (N) is on the underside, between the eyepieces.
Hold the switch down until the Bushnell logo appears in the display.
3) ADJUST IPD (EYEPIECE SPACING) (for more details, see pg. 9)
To adjust the spacing between the eyepieces, push/pull the eyepieces (M),
or turn the small knob (P), so they are closer together or farther apart.
4) TURN ON IR (INFRARED) LIGHT (for more details, see pg. 10)
At night or if needed, press the IR button (C).
5) FOCUS (for more details, see pg. 10)
First, rotate each eyepiece (M) until the LCD displays (icons or edges) are in focus.
Next, turn the center focus knob (L) until your subject appears sharp.
ENGLISH

5
PARTS AND CONTROLS GUIDE
Observe battery polarity marks
inside battery compartment
when inserting batteries,
and ensure polarity marks on
cap match polarity in battery
compartment when replacing
cap (+ to + and - to -).
C
D
L
F
M
B
E
K
P
O
Q
G
HI
J
A
N
Objective Lens
IR Light/
Battery
Compartment
+
-
+
-