BWI Eagle AIR-EAGLE FM2 43-1000-SSB-R1/8-DC Manual

PRODUCT INFORMATION
BULLETIN
238 Pillow Street
Butler, PA 16001
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
AIR-EAGLE®FM2
900MHz RF Transmitter
DUAL PUSHBUTTON INPUT
MODEL 43-1000-SSB-R1/8-DC
DESCRIPTION
The AIR-EAGLE FM2 RF TRANSMITTER IS a dual pushbutton transmitter
designed to transmit start and stop signals to a receiver located up to
1200 feet away. The model 43-1000-SSB-R1/8-DC has been
programmed to operate Relays #1 and #8 in the AIR-EAGLE FM2
RECEIVER, model 43-2000
PC BOARD SET-UP INFORMATION
Make the following connections on the PC Board Terminal Strip:
DC INPUT TERMINAL STRIP (DC IN)
Terminal 1 Positive (+) 9-36VDC INPUT
Terminal 2 Negative (-) 9-36VDC INPUT
INPUT 1 TERMINAL STRIP (INP1)
Terminal 1 Green Pushbutton Input
Terminal 2 Green Pushbutton Input
Terminal 3 Red Pushbutton Input
Terminal 4 Red Pushbutton Input
I/O TERMINAL STRIP (TERM2)
Terminal 1 Not Used On This Model
Terminal 2 Not Used On This Model
Terminal 3 Not Used On This Model
Terminal 4 Not Used On This Model
NETWORK SWITCH CONFIGURATION OPTIONS
(SEL1)
Network
Address SW1 SW2
#1 OPEN OPEN
#2 CLOSED OPEN
#3 OPEN CLOSED
SEL 1 (SW1 & 2):
USED TO SET
NETWORK
FREQUENCY
#4 CLOSED CLOSED
Dc Power Input Module
Open
Closed
SEL1
2
amp
+-
DC IN
INP1 TERM2
1 2 341 2 34
NSW1
12

AIR-EAGLE®FM2
900MHz RF Transmitter
DUAL PUSHBUTTON INPUT
MODEL 43-1000-SSB-R1/8-DC
DIMENSIONS & INDICATORS
Top View
Side View
5.50 "
6.30"
PowerStart
Power Input cable
Stop
Antenna Connector
CH1 LED - Red LED illuminates continuously while the
Green pushbutton is depressed.
POWER LED –Green LEDilluminates continuously while power is
applied to the transceiver.
CH2 LED - Red LED illuminates continuously while the Red pushbutton is
depressed.
SPECIFICATIONS
Power Supply 9 –36 VDC @ 10 Watts
Fuse Protected 2 amp
Transmitter Data Two DRY Contact Inputs (Pre-Wired to
Pushbuttons
Transmit Frequency 900MHz Spread Spectrum
RF Channels Four independent network frequencies
RF Output Power 4mW
Transmit Range Up to 1200 feet with external antenna -
see accessories)
Enclosure ABS Plastic, NEMA 3, 3R, 4, 4X, 12, 13
Operating Temp -40oF - +185oF
REPLACEMENT PARTS & ACCESSORIES
PC Board (Main) 43-1002-SSB-R1/8
Standard Antenna (Included):
900MHz TNC Portable Antenna (For
distances up to 600 feet*) 49-1103
Optional Antenna & Accessories:
900MHz Omni Directional Base Antenna
(For distances up to 1200 feet*) 49-3101
Flex Coax Cable w/Connectors 49-4000-XX (XX = # of Feet)
Inline Lightning Arrestor 49-5002
* = Line of Sight
LIMITED WARRANTY STATEMENT
BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly
used and installed, will be free from defects in material and workmanship
for a period of 1 year after date of purchase. Said warranty to include the
repair or replacement of defective equipment. This warranty does not
cover damage due to external causes, including accident, problems with
electrical power, usage not in accordance with product instructions,
misuse, neglect, alteration, repair, improper installation, orimproper
testing. This limited warranty, and any implied warranties that may exist
understate law, apply only to the original purchaser of the equipment, and
last only for as long as such purchasercontinues to own the equipment.
This warranty replaces all other warranties, express or implied including,
but not limited to, the implied warranties ormerchantability and fitness for
a particular purpose. BWI Eagle makes no express warranties beyond
those stated here. BWI disclaims without limitation, implied warranties of
merchantability and fitness for a particular purpose. Some jurisdictions do
not allowthe exclusion of implied warranties so this limitation may not
apply to you. To obtain warranty service, contact BWI Eagle for a return
material authorization. When returning equipment to BWI Eagle, the
customer assumes the risk of damage or loss duringshipping and is
responsible fortheshipping costs incurred.
DOCUMENT DATE: 21-Jul-06
238 Pillow Street
Butler, PA 16002
[phone]
Fax [phone]
www.bwieagle.com