BWI Eagle AIR-EAGLE FM2 43-1000N4W-120VAC Manual

PRODUCT INFORMATION
BULLETIN
238 Pillow Street
Butler, PA 16001
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
AIR-EAGLE®FM2
900 MHz RF Transmitter
DUAL CONTACT INPUT
MODEL 43-1000N4W-120VAC
DESCRIPTION
The model 43-1000N4W-120VAC, AIR-EAGLE FM2 TXIS a dual contact
input R.F. transmitter designed to transmit unique signals to the model
43-2000 AIR-EAGLE FM2 RECEIVER which can be located up to 1 mile
(*) away. Enclosed in a rugged NEMA 4 enclosure, this unit is well-
suited to meet the environmental challenges of any industry. This
model comes equipped with a terminal strip for ease of interfacing with
any external dry contact input devices such as tilt switches, flow
switches, speed switches etc.
(*) –Longer distances can be obtained with external antennas
PC BOARD SET-UP INFORMATION
Make the following connections on the PC Board Terminal Strip:
DC INPUT TERMINAL STRIP (DC IN)
Term 1 Positive (+) 12VDC INPUT from internal 120VAC adapter
Term 2 Negative (-) 12VDC INPUT from internal 120VAC adapter
INPUT 1 TERMINAL STRIP (INP1)
Terminal 1 CH1 Dry Contact Input (+)
Terminal 2 CH1 Dry Contact Input (Common)
Terminal 3 CH2 Dry Contact Input (Common)
Terminal 4 CH2 Dry Contact Input (+)
I/O TERMINAL STRIP (TERM2)
Terminal 1 Not Used On This Model
Terminal 2 Not Used On This Model
Terminal 3 Not Used On This Model
Terminal 4 Not Used On This Model
NETWORK SWITCH TERMINAL STRIP (NSW1)
Terminal 1 Not Used On This Model
Terminal 2 Not Used On This Model
NETWORK SWITCH CONFIGURATION OPTIONS
(SEL1)
Network
Address SW1 SW2
#1 OPEN OPEN
#2 CLOSED OPEN
#3 OPEN CLOSED
SEL 1 (SW1 & 2):
USED TO SET
NETWORK
FREQUENCY
#4 CLOSED CLOSED
Dc Power Input Module
Open
Closed
SEL1
2
amp
+-
DC IN
INP1 TERM2
1 2 341 2 34
NSW1
12

AIR-EAGLE®FM2
900 MHz RF Transmitter
DUAL CONTACT INPUT
MODEL 43-1000N4W-120VAC
DIMENSIONS & INDICATORS
CH1 LED - Red LED illuminates continuously when the
contact input for Channel 1 is closed.
POWER LED –Green LEDilluminates continuously while power is
applied to the transmitter.
CH2 LED - Red LED illuminates continuously when the contact input
for Channel 2 is closed.
SPECIFICATIONS
Power Supply 120VAC from internal adapter
Fuse Protected 2 amp
Transmitter Data Two DRY Contact Inputs
Transmit Frequency 900MHz Spread Spectrum
RF Channels Four independent network frequencies
RF Output Power 4mW
Transmit Range Up to 1200 feet with external antenna - see accessories)
Enclosure Hinged Fiberglass w/Window, NEMA 3, 3R, 4, 12, 13
Operating Temp -40oF - +185oF
REPLACEMENT PARTS & ACCESSORIES
PC Board (Main) 43-1002
Standard Antenna (Included):
900MHz TNC Portable Antenna (For
distances up to 600 feet*) 49-1103
Optional Antenna & Accessories:
900MHz Omni Directional Base Antenna
(For distances up to 1200 feet*) 49-3101
Flex Coax Cable w/Connectors 49-4000-XX (XX = # of Feet)
Inline Lightning Arrestor 49-5002
* = Line of Sight
LIMITED WARRANTY STATEMENT
BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly
used and installed, will be free from defects inmaterial and workmanship
for a period of 1 year after date of purchase. Said warranty to include the
repair or replacement of defective equipment. This warranty does not
cover damage due to external causes, including accident, problems with
electrical power, usage not in accordance with product instructions,
misuse, neglect, alteration, repair,improperinstallation, or improper
testing. This limited warranty, and any implied warranties that may exist
understate law, apply only to the original purchaser ofthe equipment, and
last only for as long as such purchaser continues to own the equipment.
This warranty replaces all other warranties, express or implied including,
but not limited to, the implied warranties or merchantability and fitness for
a particular purpose. BWI Eagle makes no express warranties beyond
those stated here. BWI disclaims without limitation, impliedwarranties of
merchantability and fitness for a particular purpose. Some jurisdictions do
not allowthe exclusion of implied warranties so this limitation may not
apply to you. To obtain warranty service, contact BWI Eagle for a return
material authorization. When returning equipment to BWI Eagle, the
customer assumes the risk of damage or loss during shipping and is
responsible fortheshipping costs incurred.
DOCUMENT DATE: 17-Jun-05
238 Pillow Street
Butler, PA 16001
[phone]
Fax [phone]
www.bwieagle.com