Coalesse Emu Ivy User manual

ARM CHAIR SO SIDE CHAIRFA
Page 1 of 6
939500510 Rev B
™Ivy Seating Cushion
If you have a problem, question, or request, call
your local dealer, or Coalesse at 1.800.627.6770
Or visit our website: www.coalesse.com
©2010 Coalesse
San Francisco, California U.S.A.
Printed in U.S.A.
The emu logo is a registered trademark of EMU GROUP S.P.A.. ITALY.

1
2a
2b
Top View of Rear Corner
METAL CLIP
SEAT CUSHION
CHAIR
WEBBING
Page 2 of 6
939500510 Rev B
Installing a Cushion onto an
Arm Chair
1. Place cushion onto center of chair.
2. Locate the rear corners on the inside of
chair. Locate the two (2) metal clips on
seat cushion (2a). Secure both metal clips
to the chair webbing at each corner so seat
cushion is pulled snugly (2b).

1
2a
2b
Page 3 of 6
939500510 Rev B
Top View of Rear Corner
METAL CLIP
SEAT CUSHION
CHAIR
WEBBING
Installing the Cushions
onto a Sofa
1. Place the two (2) cushions
onto the sofa.
2. Locate the rear corners on the
inside of the sofa. Locate the metal
clips at each corner of the cushions
(2a) and secure both to the sofa
webbing at each corner (2b).

3a
3c
GAP GAP GAP
Top View
Fig. 1
3b
3d
SEAT CUSHION
METAL CLIP
CHAIR
WEBBING Page 4 of 6
939500510 Rev B
Installing the Cushions
onto a Sofa (Continued)
3. Locate the other two (2) metal clips
near the center of the sofa. Pull firmly
on the first clip (3a) and secure to the
webbing of the sofa (3b). Pull firmly on
the second clip (3c) and secure to the
webbing of the sofa (3d) so the seat
cushions are pulled snugly towards the
center of the sofa.
NOTE: It is important that the cushions
are evenly spaced with equal gaps as
shown (Fig. 1).

2
SEAT CUSHION
SEAT
CUSHION
1b
BALL
BUTTON
1a
3b
BALL
BUTTON
3a
Page 5 of 6
939500510 Rev B
Installing a
Cushion onto
a Side Chair
1. Locate each ball and
string (there are four total)
on seat cushion. Press
button on ball inward (1a)
and slide ball off string
(1b).
2. Flip chair over. Slide
all four (4) strings through
chair webbing.
3. Place ball back onto
the two rearward strings by
first pressing the button on
the ball inward (3a) and
sliding downward (3b) so it
fits snuggly against seat
webbing.

4
6b
BALL
BUTTON
6a
5
Page 6 of 6
939500510 Rev B
4. Grab the front of the seat cushion and fold
over the front.
5. Slide the front two (2) strings through
eyelets in seat cushion.
6. Place ball back onto each of the two
strings by first pressing the button on the ball
inward (6a) and sliding downward (6b) so it fits
snuggly against seat cushion.