
K10376
©CANON INC.2012
ҚАЗАҚША
תירבע
HRVATSKI
Podešavanje faksa
Kako biste koristili značajke faksa uređaja, postavke faksa možete unijeti koristeći <Easy
setup> (Jednostavno postavljanje).
<Easy setup> (Jednostavno postavljanje) se pokreće.
Slijedite upute na zaslonu kako biste dovršili postavljanje sukladno radnom okruženju.
Pomoću gumba []{} odaberite stavku, a zatim pritisnite [OK] (U redu).
Pritisnite [MENU] (Izbornik) , a zatim odaberite > <Device settings>
(Postavke uređaja) > <Fax settings> (Postavke faksa) > <Start Easy setup>
(Pokreni jednostavno postavljanje) ili <Easy setup> (Jednostavno postavljanje)
> [OK] (U redu) ili <Start setup> (Pokreni postavljanje).
Korištenje opcije <Easy setup> (Jednostavno postavljanje)
Dodatne informacije o postavljanju faksa koristeći
<Easy setup> (Jednostavno postavljanje)
Povežite uređaj s telefonskom utičnicom pomoću isporučenog telefonskog kabela.
Priključak je označen na stražnjoj strani uređaja.
• Osnovni način povezivanja prikazan je na slici.
• Korisnici u Europi: Ako sami pripremate telefonski kabel, pazite da bude 6-žičani
telefonski kabel.
Povezivanje s telefonskom utičnicom
Prilikom povezivanja telefona ili automatske sekretarice, skinite kapicu, a zatim
povežite telefon ili automatsku sekretaricu pomoću telefonskog kabela.
Priključak je označen na stražnjoj strani uređaja.
• Nemojte koristiti razdjelnike za telefonski kabel.
• Korisnici u Ujedinjenom Kraljevstvu: po potrebi koristite B.T. adapter za povezivanje.
ENGLISH
Setting Up the FAX
To use the fax features of the machine, you can enter the fax settings through the Easy
setup.
Easy setup starts up.
Follow the on-screen instruction to complete the settings in accordance with the
operating environment.
Use the []{} button to select the item, then press the OK button.
Press the MENU button, then select in the order of > Device settings >
FAX settings > Start Easy setup or Easy setup > OK button or Start setup.
Complementary Information about Fax Setting Using
Easy setup
Connect the machine to a telephone jack with the supplied telephone line cable.
The connector is labeled on the back of the machine.
• A basic connection method is shown in this figure.
• Users in Europe: If you prepare your own telephone line cable, be sure it is a 6-wire
telephone line cable.
Connect to a Telephone Jack
When connecting a telephone or an answering machine, remove the Cap, then
connect a telephone or an answering machine with a telephone line cable.
The connector is labeled on the back of the machine.
• Do not use a telephone jack line duplexer.
• Users in UK: Use a B.T. adapter for connection as required.