Canon i350 - Color Bubble Jet Printer Instruction Manual

i350/i250 Series
Color Bubble Jet Printer
Start Here
Connect one end of a USB cable (not
included)
to the computer, the other to
the printer.
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
Continue with Step 6
on side two.
USB Port
USB Cable
Protective cap
Insert the black ink tank
(BCI-24 Black)
k
into the slot on the right. Press down
until the ink tank locks into place
Repeat the procedure for the color ink
tank (BCI-24 Color), inserting it into the
remaining slot.
Close the front cover.
Pull out the paper rest and the output
tray (
i
350 only).
Remove the black ink tank (BCI-24 Black)
from its package and pull off the orange
protective cap.
NOTE:
To avoid spilling ink, do not touch
the bottom of the tank once you have
removed the protective cap.
Click
R
emove the print head from its package
.
Raise the gra
y
lock lever on the printer
.
Slide the
p
rint head into the holder until
it is securel
y
seated
.
Lower the lever until it locks into
p
lace
.
Tear at notch to o
p
e
n
Electrical
contacts
NOTE:
Do not touch the electric
a
l cont
a
cts
on the back and bottom of the
p
rint head
.
Remove the orange
p
rotective ca
p
.
Open the front cover. Remove the packing
material from the print head holder.
Remove all shipping tape from the printer.
NOTE:
The serial number is located to the
to register the product.
Shipping Tape
Serial number
Print head
holder
Packing
material
Carefully remove all items from the box.
50
Series
Color Bubble Jet Printer
Documentation
and Software Kit
Power Cord
i
350/
i
250 Series Print Head
Ink Tanks
BCI-24 Color
NOTE:
These instructions are for both the
i
350 Series Color Bubble Jet and the
i
250
Series Color Bubble Jet printers
. Some of
the graphics used may vary slightly from
the product you have purchased.
NOTE:
USB cable not included.
2
Prepare the Printer
1
Unpack the Printer
3
Inst
a
ll the Print He
ad
4
Install the Ink Tanks
5
Connect the Printer
To Your Computer

QA7-2709-V01
©
2003 Canon U.S.A. Inc.
Canon is a registered trademark of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
40-42482-0203
Printed in Thailand
Place a sheet of blank paper in the
paper rest.
Start the alignment procedure.
Windows:
a.
Start
,
select
Control Panel
,
Printers and
Other Hardware
, then
Printers and
Faxes
.
b.
Right-click the
Canon
i
350
or
i
250
icon, then click
.
NOTE:
For Windows 98/Me, click
Start
,
, then
. Right-
click the
i
350
or
i
250
icon,
then click
Properties
.
c.
Click the
Maintenance
tab, then click
the
Print Head Alignment
icon.
d.
When asked to start print head
alignment, click
OK
.
Macintosh OS X:
a
.
Macintosh HD
icon, then
the
Utilities
folder, then the
Print Center
icon.
r
Select
i
350
or
i
250
.
Under the Printers menu, select
Configure Printer
. Select
i
350
or
i
250
,
and click
Select
.
b
.
Click the down-arrow to select
Test Print
.
c
.
Click the
Print Head Alignment
icon.
t
Follow the on-screen instructions.
Click
OK
(Windows) or
Send
(Macintosh)
when finished.
Access your CD-ROM again. From the
Application
folder, double-click on the
software to be installed.
Follow the on-screen instr
u
ctions. When the
“
”
screen appears,
click
OK
.
When the message
“
The software was
”
appears, click
Restart
.
Click
Install
. When a message asking for
your confirmation to proceed with the
installation, click
Continue Installation
.
IMPORTANT:IMPORTANT:
To ensure highest
g
To ensure highest
Step 7
Step 7
Align the Print HeadAlign the Print Head
.
.
.
.
Turn on
y
our Mac and
y
our printer and
insert the
“
Setu
p
Software & User's Guid
e
”
CD-ROM.
Double-click the
i
350 190.
p
k
g
or
i
250 190.pkg
ic
o
n
.
When the
“
Welcome to the BJ
p
rinter drive
r
Installer
”
screen a
pp
ears, clic
k
Continue
.
Rea
d
the Software License A
g
reement
and click
Contin
ue
, then click
Agree
.
Double-click the CD-ROM icon
,
then the
Mac OS X
folder, then the
X
Printer Driver
folder
.
When the
“
Authentic
a
t
e
”
screen appears,
enter
y
our administrator name and
p
assword, then clic
k
OK
.
Select a destination for the
p
rinter drive
r
to be inst
a
lled. Then clic
k
Continue
.
When Terminate Installation window
appears, click
OK.
NOTE:
Remember to register your
product. The serial number is located
on the inside of the printer, to the right
of the print head.
When the
software menu appears, click
Install
. Then follow the on-screen
instructions.
appears, click
OK
, then
Exit
.
Click Yes if
y
ou are prompted to restart
y
ou
r
computer.
Turn the computer on
and
LEAVE THE
PRINTER OFF
.
insert the
“
Setup Software & User
’
s
Guide
”
CD-ROM. The setup program should
run automatically.
NOTE:
For Windows
®
XP or Windows 2000,
log on to Windows as an Administrator
before continuing.
When the main menu appears, click
Install
.
Read the License Agreement, then click
Ye
s
to contin
u
e
.
NOTE:
If the setup does not run
Start
, then
Run
, then
type
D:\msetup.exe
, where
D
is your
CD-ROM drive.
When the Printer Port window appears,
TURN THE PRINTER ON
. The software will
begin identifying the printer port being
used.
NOTE:
Be sure to register your product.
The serial number is located on the
inside of the printer, to the right of the
print head.
0
6
6
Install the Printer Driver (Windows
Install the Printer Driver (Window
®
)
)
®
®
6
Install the Printer Driver (Macintosh
t
®
)
®
®
7
Align the Print Head
g