Canon imageCLASS LBP622Cdw User manual

FT6-2237 (000) XXXXXXXXXX Copyright CANON INC. 2018 PRINTED IN XXXXX
Getting Started
Imprimé XXX XXXXX
Quick Operation P.21
Quick Setup NEXT PAGE
Please read "Important Safety Instructions" before operating this product. After you finish
reading this guide, store it in a safe place for future reference.
The information in this document is subject to change without notice.
Getting Started
Mise en route
Introducción
Introdução
canon.com/oip-manual

Getting Started
Please read "Important Safety Instructions" before operating
this product.
P.26
After you nish reading this guide, store it in a safe place for
future reference.
The information in this document is subject to change
without notice.
Mise en route
Prenez connaissance des "Consignes de sécurité importantes"
avant toute utilisation de ce produit.
P. 32
Après en avoir pris connaissance, conservez ce guide dans
un endroit sûr en vue de consultations ultérieures.
Les informations contenues dans ce document peuvent être
modiées sans avis préalable.
Introducción
Lea las "Instrucciones de seguridad importantes" antes de usar
este producto.
página 38
Cuando termine de leer esta guía, guárdela en un lugar
seguro para futuras consultas.
La información de este documento puede ser modicada sin
previo aviso.
Introdução
Leia "Instruções de segurança importantes" antes de operar
este produto.
página 44
Depois de ler este guia, guarde-o em um local seguro para
referência futura.
As informações contidas neste documento estão sujeitas a
alterações sem aviso prévio.
You can access
canon.com/oip-manual to read the User's Guide that de-
scribes all functions of this machine.
Le guide de l'utilisateur,
qui décrit toutes les fonctions de cet appareil se trouve sur
canon.com/oip-manual.
Puede acceder a
canon.com/oip-manual para leer la Guía de usuario donde
se describen todas las funciones de este equipo.
Você pode acessar
canon.com/oip-manual para ler o Guia do usuário que
descreve todas as funções desta máquina.
2
Quick Setup

Before starting the installation
• Remove all of the tape.
• Do not remove the sticker that covers the USB
port.
Sticker
Installation Requirements
Provide a space of 4" (100 mm) or more around
the machine.
17"
(430 mm)
14 7/8"
(377 mm) 16 1/2" (418 mm) 8 1/2" (216 mm)
11 3/8"
(287 mm)
× 4
Starter toner cartridges are included.
Installing the MachineItems Included with the Machine
3
Installation of the Machine
Quick Setup

1
2
3
Up to here
4
5
6
Installation of the Machine
4
Quick Setup

Next, proceed to configure the machine.
2
1
7
8
5
Quick Setup
Pt
En
Fr
Es

Configuring the Method of
Connecting to a Computer
1.
2. Configure the initial settings, according to the
screen.
• Set the language and country/region.
• Set the time zone and current date/time.
Before starting the configuration
• The machine cannot be connected to both
wired and wireless LANs at the same time.
• If the machine is connected to an
unsecured network, your personal
information might be leaked to a third
party. Please be aware and careful of this.
• The machine does not come with a
router. Please have one ready, if necessary.
• Even in an environment without wireless
LAN router, you can use Access Point
Mode to make a wireless connection to
the machine directly from your mobile
device (Direct Connection).
User's Guide
Specifying the connection method
NoYes
Use wireless LAN to
connect to network?
(Can config. later.)
• To connect via wireless LAN : <Yes>
• To connect via wired LAN or USB : <No>
To connect via wireless LAN
1. Make sure that the computer is connected to a
router properly.
2. Check the network settings on the computer.
NOTE
Parts and functions of the operation panel
P.22 "Start the Operation from the Operation
Panel"
Configuring the Initial Settings of
the Machine
6
Configuring the Machine Configure the settings in the following order.
Quick Setup
En

For details
"Setting Up Using the Setup Guide" in the User's Guide
3. Take note of the SSID and network key.
• Check the label on the router. User's Guide
• The setting operation is easier if the router is
provided with a WPS mark. User's Guide
4. Set the access point and network key
according to the screen below.
OK
For more
information, refer
to the manual.
1. Select <OK>.
2. Select <SSID Settings>.
3. Select <Select Access Point>.
4. Select the access point (SSID).
5. Enter a WEP key (network key), and select
<Apply>.
6. Select <Yes>.
• Wait until message <Connected.> is displayed.
7. Select <Close>.
• The IP address will be automatically
configured in a few minutes.
To view a video guide on the process
You can find a video and guide to assist the
process for the Wireless Network connection
from the URL below. Viewing these guides will
ensure a smooth setup of the device into your
existing wireless environment.
http://www.usa.canon.com/WirelessHelp
"Toner replenishment service" settings
Precautions
• Use of the toner replenishment service
requires prior registration with select
retailers. This service is only available in
certain countries.
Through the toner replenishment service, new
toner cartridges are automatically delivered to you
before your existing toner cartridge is used up.
• This service can be set up through "Toner
Delivery Settings" displayed on the Home screen.
Did you sign up for
toner replenishment
service when you
purchased this
product?
To continue setup
for automatic toner
delivery, press OK,
then press OK again
(if you agree) on
the next screen.
*Network connection
required to complete
registration.
Next Screen:
Press OK
1. Press OK .
2. Press OK .
• To skip "Toner replenishment service" (or set it
later), press and proceed to Step 4.
3. Press OK .
• If an error message appears, follow the on-screen
instructions to resolve it.
4. Install the driver and software.
P.9 "Installing the software"
Now you are nished with the
conguration of the initial settings.
7
Quick Setup
En

To connect via wired LAN
The machine does not come with a LAN cable.
Please have one ready, if necessary.
1. Make sure that the computer is connected to a
router properly.
2. Check the network settings on the computer.
3. Connect the LAN cable.
• After connecting the cable, wait a few minutes
(until the IP address is set automatically).
• If a static IP address has been set on the
computer, set the machine's IP address
manually.
4. Install the driver and software.
P.9 "Installing the software"
Now you are finished with the
configuration of the initial settings.
To connect via USB
• The machine does not come with a USB cable.
Please have one ready, if necessary.
• Make sure that the USB cable you
use has the following mark.
• Do not connect the USB cable before installing
the driver. If you did, disconnect the USB cable
from the computer, close the dialog box, and then
perform the following procedure from step 1.
1. Install the driver and software.
P.9 "Installing the software"
• When a screen with instructions for connecting
the USB cable to the machine is displayed,
remove the sticker that covers the USB port.
Now you are finished with the
configuration of the initial settings.
8
Configuring the Machine
Quick Setup
En

Installing the software
• The procedure described here is only applicable
when your computer runs on the Windows OS.
For more details on the software installation
procedure, see the driver's manual.
• For the installation when your computer runs on
the macOS, see the driver's manual.
• Your machine may not come with the driver for
the macOS , depending on the time of purchase.
New drivers are uploaded to the Canon website,
and you can download and use the latest one.
1.
2.
If the screen is not displayed properly, re-
insert the CD-ROM/DVD-ROM or search for
"D:\MInst.exe" on the Windows platform (This
description assumes that "D:" is the CD-ROM/
DVD-ROM drive name).
Quick Setup
9
En

Configuration de la méthode
de connexion à un ordinateur
1.
2. Configurez les réglages initiaux en suivant les
instructions à l'écran.
• Spécifiez la langue et le pays/région.
• Spécifiez le fuseau horaire et réglez la date et
l'heure.
Avant de commencer la configuration
• Il n'est pas possible de connecter
l'appareil à la fois à un réseau sans fil et
à un réseau filaire.
•
Faites attention, si l'appareil est connecté à un
réseau non sécurisé, vos données personnelles
peuvent être divulguées à un tiers.
• L'appareil n'est pas livré avec un routeur.
Vous devez vous en procurer un.
•
Même dans un environnement sans routeur
de réseau sans fil, vous pouvez utiliser
le mode Point d'accès pour établir une
connexion sans fil entre l'imprimante et
votre appareil mobile (connexion directe).
Guide de l'utilisateur
Spécification de la méthode de connexion
NonOui
Util rés sans fil
pour conn. rés. ?
(Config. ult.)
• Connexion par réseau sans fil: <Oui>
• Connexion par réseau filaire ou USB: <Non>
Connexion par réseau sans fil
1. Assurez-vous que l'ordinateur est correctement
connecté à un routeur.
2. Vérifiez les réglages réseau sur l'ordinateur.
REMARQUE
Sections et fonctions du panneau de commande
P.28 "Lancez l'opération depuis le panneau
de commande"
Configuration des réglages
initiaux de l'appareil
10
Configuration de l'appareil
Configurez les réglages dans l'ordre suivant.
Configuration rapide
Fr