Canon PIXMA MG8120 User manual

<< Previous Next >>
Obtaining Your Network Key
PIXMA MG8120
Windows OS
1

<< Previous Next >>
Obtaining Your Network Key
PIXMA MG8120
Windows OS
2
Introduction
3
Download the Canon PIXMA Wireless Setup Assistant
4
Using the Canon PIXMA Wireless Setup Assistant
6
TroubleShooting
7

Introduction
If you are unable to proceed to the next step after any of the following screens are
displayed when inputting the wireless LAN settings, you may be able to retrieve the
access point name / network name (SSID), or the network key (WEP key / passphrase)
using the Canon PIXMA Wireless Setup Assistant.
3
<< Previous Next >>
Note : The Wireless Setup Assistant is supported on the following operating systems only:
•Windows XP SP3 or later
•Windows XP x64 Edition SP3 or later
•Vista (32 & 64 bit)
•Windows 7 (32 & 64 bit)

Download the Canon PIXMA Wireless
Setup Assistant
4
<< Previous Next >>
Step One
Go to the Drivers & Software link for
the MG8120.
Choose your Operating System (OS)
in the Select OS dropdown list
Step Two
In the Software section, click the link
for the Canon PIXMA Wireless Setup
Assistant (Windows).
In the example below the link is
CanonAPChkTool_win210en.exe.*
The link name may vary by Operating System

Download the Canon PIXMA Wireless
Setup Assistant
5
<< Previous Next >>
Step Three
On the next screen, read the
information and instructions and
click I Agree - Begin Download
Choose to "Save" the file.
Important: Write down the file
name and the location to where the
file is being saved.

Using the Canon PIXMA Wireless
Setup Assistant:
6
<< Previous Next >>
Step One
Display the window for selecting
access point using the buttons on
the printer.
Please refer to the Getting Started
Guide if you are unable to display
the below window on the LCD
screen.

Using the Canon PIXMA Wireless
Setup Assistant:
7
<< Previous Next >>
Step Two
Double-click the file you
downloaded.
This will create a folder of the same
name as the file and this folder will
be in the same location.
Step Three
Open the folder and double-click the
CNMNPHLP.EXE file.
Example

Using the Canon PIXMA Wireless
Setup Assistant:
8
<< Previous Next >>
Step Four
Read the License Agreement, and
then click Yes when you accept the
agreement.

Using the Canon PIXMA Wireless
Setup Assistant:
9
<< Previous Next >>
Step Five
The tool "Canon PIXMA Wireless
Setup Assistant" is launched.
Confirm that the same access point
names are listed in the following
window as the ones in the Access
Points window displayed on the
printer unit (Step One).
Then, write down the Network Key
of the access point.
NOTE: The Network Key may be
displayed with text of the letters A
to F (base 16 number). Write the
number down as-is.

Using the Canon PIXMA Wireless
Setup Assistant:
10
<< Previous Next >>
Step Six
1. In the window for selecting
access point of the printer unit,
select the access point specified
in step 4, then touch the OK
button.
2. Touch the right function button
(below Enter / edit). Enter the
network Key or Passphrase.
3. When finished entering the
Network Key, touch the Left
function button (below Done)
•
4. Touch the OK button to connect
to the access point.