Canon PIXMA MX512 User instructions

Setting Up Your MX512 In
Default Mode (Tel Priority Mode)
With An Answering Machine
Next

Fax Easy Setup
NextPrevious
Click Next to step through this image-friendly version of Fax Easy Setup.
If you started Fax Easy Setup, on the fax machine’s operation panel, and
prefer to go through this image-friendly version…
Step 1
Press the COPY button at any
screen to go to copy standby mode.
Step 2
Click Next to proceed
through the setup.

Connecting The Phone Lines
NextPrevious

Connecting Your Phone/Answering Machine
NextPrevious
YES
Click Here or Go To Page 13
NO
Click the Next Button
4
Is your answering machine built into your phone?

Fax to Phone Line Connection
NextPrevious 5
Before
After
(Existing Phone Cord)
Wall Jack
Answering
Machine
Hand Set
(Phone)
(Existing Phone Cord)
Wall Jack
(Existing Phone Cord)
Answering
Machine
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 6
•Plug the provided phone cord into the wall jack
Wall Jack
(Existing Phone Cord)
Answering
Machine
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 7
•Plug the provided phone cord into the “LINE” jack located on the
rear of the multifunction.
Wall Jack
(Existing Phone Cord)
Answering
Machine
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 8
•Remove the white plug from the upper jack labeled “EXT.”
Wall Jack
(Existing Phone Cord)
Answering
Machine
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 9
•Plug the second phone cord into the “EXT.” jack located on the rear
of the multifunction
Wall Jack
Answering
Machine
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)
(Existing Phone Cord)

Fax to Phone Line Connection
NextPrevious 10
•Plug the second phone cord into the answering machine.
Wall Jack
(Existing Phone Cord)
Answering
Machine
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Wall Jack
(Existing Phone Cord)
Answering
Machine
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)
Fax to Phone Line Connection
NextPrevious 11
•Plug the third phone cord into the answering machine.

Fax to Phone Line Connection
NextPrevious 12
•Plug the third phone cord into the phone.
Wall Jack
(Existing Phone Cord)
Answering
Machine
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

(Existing Phone Cord)
Wall Jack Hand Set
(Phone)
Fax to Phone Line Connection
NextPrevious 13
Before
After
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 14
•Plug the provided phone cord into the wall jack
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 15
•Plug the provided phone cord into the “LINE” jack located on the
rear of the multifunction
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 16
•Remove the white plug from the upper jack labeled “EXT.”
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 17
•Plug the second phone cord into the “EXT.” jack located on the rear
of the multifunction
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 18
•Plug the second phone cord into the phone
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Setting Up The Receive Mode
NextPrevious

Step 1
Turn on the MX512 by pressing the
ON button if it is not powered on
already.
Step 2
Press the FAX button.
NextPrevious 20