Canon LX-MU500 User manual

(1/7)
DLP Projector LX-MU500/LX-MW500
1. Main Features
1-1. Semi-installation model with a brightness of 5000 lumens
This product in the semi-portable class comes with a high brightness specification of 5000
lumens.
You can see sharp video in meeting rooms or classrooms even when the lights are on.
(*1)
*1: The lighting needs to be adjusted or blocked when projecting a large sized video or when the light from
outside is strong.
1-2. 4-point keystone
In addition to the conventional vertical and horizontal keystone, the product is equipped
with a 4-point keystone feature which adjusts the four corner positions of the projected
video to correct for distortion.
1-3. Equipped with two digital input HDMI terminals, also supports MHL
Equipped with two HDMI terminals for projecting high-definition digital video.
Also supports MHL, allowing you to directly input and display image data on a
smartphone or tablet without going through a PC. (*2)
Integration with mobile devices provides a wide range of uses and allows you to give
easier and more intelligent presentations.
*2: Commercially-available, specialized cables must be supplied separately.
1-4. Supports HDBaseT
Supports the "HDBaseT" next-generation digital communication standard. Easily
connects the same high-definition video signal/audio signal as HDMI with one LAN cable.

(2/7)
2. Specifications
2-1. Basic specifications
Model
LX-MW500
LX-MU500
Classifi-
cation
Product classification
Projector
Video element, number
of chips
DMD x1
DMD
Number of pixels
1280x800 (WXGA)
1920x1200(WUXGA)
Display size, aspect ratio
0.65 model, 16:10
0.67 model, 16:10
Projection
lens
Focal distance, F value
f=15.75 - 25.1 mm, F2.45 - 3.07
Zoom ratio
1.6x
Projection distance
W: 1.4 - 5.8 m
T: 2.3 - 5.8 m
W: 1.4 - 5.5 m
T: 2.2 - 5.5 m
Type 100 projection
distance
2.4 - 3.9 m
2.3 – 3.7 m
Projection ratio (*1)
1.12 - 1.8:1
1.07 - 1.71:1
Driving method
Zoom, focus, shift: manual
Light
source
Type
Ultra high-voltage lamp for projectors
Power consumption (*2)
370 / 296 W
Video
Optical method
Time division color extraction / Sequential display
Brightness (*2)
5000 / 4000 lm
Peripheral illuminance
ratio
75%
75%
Contrast ratio
3750:1
2500:1
Video size (*3)
60 - 240
Lens shift amount
55% - 57.5%
52.5% - 55%
Electronic zoom (length
ratio)
Maximum 2.0x (over scanning display time maximum 1.8x)
Keystone correction range
H/V ±30°
Video
signal
Analog PC input(*4)
WUXGA/WSXGA+/UXGA / SXGA+ / WXGA+ / FWXGA / WXGA / SXGA / XGA /
SVGA / VGA / MAC
Digital PC input(*4)
WUXGA/WSXGA+/UXGA / SXGA+ / WXGA+ / FWXGA / WXGA / SXGA /
XGA / SVGA / VGA
Digital video input
1080p / 1080i / 720p / 576p / 480p
MHL input
1080p / 1080i / 720p / 576p / 480p / 576i / 480i
Component video input
1080p / 1080i / 720p / 576p / 576i / 480p / 480i
Video input/S-Video
NTSC / PAL / SECAM / NTSC4.43 / PAL-M / PAL-N / PAL-60
Connection
pins
Mini Dsub15 x2
Analog PC / Component video input
Mini Dsub15
Analog PC / Component video output
HDMI/MHL
Digital PC / Digital video / MHL input
HDMI
Digital PC/Digital video input
Mini DIN4
S-Video input
RCA x3
Video input / Audio-L / Audio-R
Mini jack x2
Audio input x1, Audio output x1
Dsub9
RS-232C connection
RJ-45 / HDBaseT
Network connection (100BASE-TX / 10BASE-T) / HDBaseT
USB mini B
Service port
Mechanical
Adjustment legs
Front: 2 (maximum elevation angle of 4.5°)
Built-in speaker
10 W, monaural
External dimensions
(WxHxD) [mm]
465 x 123 x 264 mm
Weight
5.4 kg
Noise level (*2)
36 / 33 dB
Other
Rated power supply
voltage
AC100 - 240 V : 50 / 60 Hz
Power consumption (*2)
500 / 400 W
Standby power (*5)
3.0 / 0.5 W
Operating environment
0°C - 40°C Humidity 10-90%
0°C - 40°C Humidity 10-80%
*1: Calculated value for model 100 video
*2: Lamp modes are Normal / Eco, Eco brightness is a calculated value and not guaranteed as a specification
*3: Video with the same aspect ratio as the DMD aspect ratio
*4: WUXGA is available for LX-MU500 only
*5: Standby LAN feature is on/off


(3/7)
2-2. Installation specifications
- Video size and the projection distance
The LX-MU500/LX-MW500 is equipped with an optical zoom feature.
"L" is the projection distance, and "H" is
the video height (vertical length).
"Hs" is the length from the lens optical
axis to the bottom edge of the video.
The ratio between "H" and "Hs" is fixed
as follows in this product.
LX-MU500 10:1 (Hs = H/10)
LX-MW500 10:0 (Hs = 0)
Video sizes from types 60 - 240 can be correctly displayed with the LX-MU500, LX-MW500.
The relationship between the video size and the projection distance for each model is as follows.
[LX-MW500] [LX-MU500]
Video size(16:10)
Projection
distance
Video size(16:10)
Projection
distance
Diagonal
[Type] Width [m] Height [m] L(W) [m] L(T) [m] Diagonal [Type] Width [m] Height [m] L(W) [m] L(T)
[m]
60
1.3
0.8
1.5 m
2.3 m
60
1.3
0.8
1.4 m
2.2 m
70
1.5
0.9
1.7 m
2.7 m
70
1.5
0.9
1.6 m
2.6 m
80
1.7
1.1
1.9 m
3.1 m
80
1.7
1.1
1.8 m
3.0 m
90
1.9
1.2
2.2 m
3.5 m
90
1.9
1.2
2.1 m
3.3 m
100
2.2
1.4
2.4 m
3.9 m
100
2.2
1.4
2.3 m
3.7 m
110
2.4
1.5
2.7 m
4.3 m
110
2.4
1.5
2.5 m
4.1 m
120
2.6
1.6
2.9 m
4.7 m
120
2.6
1.6
2.8 m
4.4 m
130
2.8
1.8
3.1 m
5.0 m
130
2.8
1.8
3.0 m
4.8 m
140
3.0
1.9
3.4 m
5.4 m
140
3.0
1.9
3.2 m
5.2 m
150
3.2
2.0
3.6 m
5.8 m
150
3.2
2.0
3.5 m
5.5 m
180
3.9
2.4
4.3 m
-
180
3.9
2.4
4.2 m
-
210
4.5
2.8
5.1 m
-
210
4.5
2.8
4.8 m
-
240
5.1
3.2
5.8 m
-
240
5.1
3.2
5.5 m
-
* The numerical values in the table are approximate values that are rounded to the nearest whole number.


(4/7)
2-3.Adjustment legs
The diagram on the left shows the underside
of the unit.
Adjustment legs are attached in two
locations as shown in the diagram.
Adjust the length of the adjustment legs to
raise the lens side of the projector and
modify the projection angle or to fine tune
the inclination of the left and right sides.
The diagram on the left shows the side of
the unit.
The adjustment legs have a threaded
structure and can be rotated to adjust the
length.
This product can be installed with a
maximum angle of 4.5° between the unit
and the installation table.
* The diagram is for explanation purposes only. It does not match the actual product shape.
Adjustment legs
Fixed leg
Maximum 4.5°
Adjustment legs
Rotate

(5/7)
3. Accessories
* Lists only items related to product usage
Primary
bundled
products
Remote control
LV-RC08
Power supply: DC 3.0 V (CR2025 used)
Throw distance approx. 8 m, ±30° from the front of the
optical receiver
Computer cable
(VGA cable)
Mini Dsub15-Mini Dsub15
Connects with the computer.
Used for transmitting an analog PC signal.
Power supply cord
Connects the unit to the power outlet.
Options
Remote control
LV-RC08
Same as the bundled product
Replacement
parts
Replacement lamp
LX-LP02
Ultra high-voltage mercury lamp
Recommended replacement period (*1)
2000 hours / 2500 hours (Lamp mode: Normal/Eco)
Replacement air filter
LX-FL02
Dust filter
Install in the intake port to prevent dust from entering.
*1: Time at which the lamp has a 50% survival rate and a 50% illumination maintenance ratio.
This value is not a guarantee of the lamp lifetime.

(6/7)
4. Product Appearance
- External dimension diagram
External dimensions
TBD (W: 465 mm, H: 112 mm, D: 261 mm (18.3 x 4.4 x 10.3 inch)
* not including the protruding section)
Lens center position: 232.5mm from the left side (side with the lens is the "front".)
68.7 mm from the installation surface
Weight: 5.4 kg (11.9 lbs)
111.5 mm
(4.4 inch)
465.3 mm (18.3 inch)
260.8 mm
(10.3 inch)

(7/7)
5. Precautions for Use
-Do not look directly into the projection lens when it is emitting light.
Doing so may result in visual impairment due to the high brightness projection.
- Do not place objects in front of the lens during projection.
Exposing an object to concentrated light for a long period of time may cause it to heat up and start a fire.
- Do not block the intake or exhaust ports during operation.
Doing so may cause heat to build up inside the unit which may result in malfunction or fire.
- When the lamp burns out or reaches its time for replacement, replace it immediately with a new lamp.
This product uses as its light source a high-voltage mercury lamp that deteriorates with use over time
resulting in a decrease in illumination.
The lamp may burst as it deteriorates with use over time.
If the lamp bursts, have the lamp replaced and the unit inspected at a service center.
* The lamp does not always burst, and there is no clear indicator as to the number of hours of use before it bursts.
- Use the following settings to prevent an increase in internal temperatures in a high altitude
location with low air pressure. (*1)
Doing so may result in visual impairment due to the high brightness projection.
- Use the following settings to prevent an increase in internal temperatures in a high altitude
location with low air pressure. (*1)
Turn on the "High altitude mode".
*1: Elevation above 1500 m