Canvas ARROWHEAD RECYCLED MUSKOKA CHAIR 088-2172 User manual

ARROWHEAD
RECYCLED*MUSKOKA CHAIR
PRODUCT NO. 088-2172, 088-2173, 088-2174, 088-2175
ASSEMBLY INSTRUCTIONS
Toll-free: 1-800-670-6684
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
*Made from 95% post-consumer recycled plastic bottle caps
Scan the QR
code for online
assembly
instruction video.
ENFR_Canvas_Muskoka_AssemblyInstructions_JAN2020.indd 1 2020-01-06 1:49 PM

PART LIST
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
A
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
B
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
C
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
D
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
E
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
F
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
G
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
H
1-1/2” (38 mm) screw x 14
Shown at actual size
#12-24 2” (50.8 mm)
flat head bolt x 6
Shown at actual size
I#12-24 7/16” (11.1 mm)
serrated nut x 6
Shown at actual size
Needed for assembly:
ASSEMBLY PREPARATION
IMPORTANT: Please read and understand the manual before any assembly. Before
beginning assembly of product, make sure all parts are present. Compare parts with
packaging contents list. If any part is missing, or if you have any questions, contact our
service center at 1-800-670-6684. Remove all parts from the box in the cleared area
and position them on the floor in front of you. Do not dispose of the packing materials
until assembly is complete. 2
ENFR_Canvas_Muskoka_AssemblyInstructions_JAN2020.indd 2 2020-01-06 1:49 PM

ASSEMBLY
Step 1
Requires B - SEAT, C - LEFT LEG, D - RIGHT LEG, H, I.
Attach piece Dto seat Bwith bolt Hand nut I. Tighten bolt 95%, then fully tighten at
step 7. Make sure the edge of Dis flush with B. Repeat for other side with piece C,
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
Shown at actual size
H I
(x2) (x2)
REPEAT FOR OTHER SIDE WITH PIECE C.
3
FLUSH
FACES OUT
H
I
B
B
D
D
I
H
ENFR_Canvas_Muskoka_AssemblyInstructions_JAN2020.indd 3 2020-01-06 1:49 PM

ASSEMBLY
Step 2
Requires A - BACK, G.
Place assembled seat of chair on box for ease of assembly. Attach piece Ato piece B
using Gscrews, lining up with front pre-drilled holes.
Shown at actual size
G
(x4)
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
Step 3
Requires G.
Attach piece Ato piece C and D using Gscrews.
Shown at actual size
G
(x4)
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
4
G
G
A
D
GG
A
C
ENFR_Canvas_Muskoka_AssemblyInstructions_JAN2020.indd 4 2020-01-06 1:49 PM

ASSEMBLY
Step 4
Requires E - LEFT ARM, F - RIGHT ARM, H, I.
Attach piece Eto piece B with bolts Hand nuts I. Repeat for other side with piece F.
Step 5
Requires G.
Attach pieces Eand F to piece A using Gscrews.
Shown at actual size
G
(x4)
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
Shown at actual size
H I
(x4) (x4)
REPEAT FOR OTHER SIDE WITH PIECE F.
5
B
H
I
E
OUTSIDE VIEW
INSIDE VIEW
A
F
FLUSH
G
G
A
EF
ENFR_Canvas_Muskoka_AssemblyInstructions_JAN2020.indd 5 2020-01-06 1:49 PM

ASSEMBLY
Step 7
Make sure that the nuts and bolts are all properly tightened on both sides.
Shown at actual size
G
(x2)
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
REPEAT FOR OTHER SIDE WITH PIECE C.
B
G
DC
Step 6
Requires G.
Secure piece D to piece B using Gscrew. Make sure edge of D is flush with B.
Repeat for other side with piece C, making sure edge of C is flush with B.
6
ENFR_Canvas_Muskoka_AssemblyInstructions_JAN2020.indd 6 2020-01-06 1:49 PM

WARRANTY
This CANVAS product carries a ten (10) year warranty against defects in workmanship.
Trileaf Distribution agrees to replace a defective product free of charge within the stated
warranty period, when returned by the original purchaser with proof of purchase. This
product is not guaranteed against wear or breakage due to misuse and/or abuse.
7
WARRANTY
MAINTENANCE
Clean with soapy water and sponge. Do not pressure wash.
MAINTENANCETECHNICAL DATA
Dimensions (L x W x H) 89 x 79 x 102
Product weight 22 kg
35” x 31” x 40”
48 lb
TECHNICAL DATA
Made in Canada with domestic and imported materials
Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
CAUTION: DO NOT EXCEED MAXIMUM WEIGHT CAPACITY OF 300 LB (126 KG).
JAN-06-2020
ENFR_Canvas_Muskoka_AssemblyInstructions_JAN2020.indd 7 2020-01-06 1:49 PM

ARROWHEAD
FAUTEUIL MUSKOKA RECYCLÉ*
Nº DE MODÈLE : 088-2172-0, 088-2173-8, 088-2174-6, 088-2175-4
INSTRUCTIONS D’ASSEMBLAGE
Numéro sans frais : 1 800 670-6684
IMPORTANT : Veuillez lire attentivement ce guide
avant de procéder à l’assemblage de cet article.
Conservez ce guide aux fins de consultation ultérieure.
*Composé de 95 % de bouchons en plastique de bouteilles recyclées post-consommation
Scannez le code
QR pour obtenir la
vidéo d’instruction
d’assemblage
en ligne.
ENFR_Canvas_Muskoka_AssemblyInstructions_JAN2020.indd 8 2020-01-06 1:49 PM

LISTE DES PIÈCES
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
A
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
B
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
C
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
D
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
E
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
F
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
G
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
H
Vis de 1 1/2 po (38 mm) x 14.
Taille réelle indiquée
Bouton à tête plate de 2 po
(50,8 mm) nº 12-24 x 6.
Taille réelle indiquée
IÉcrou dentelé de 7/16 po
(11,1 mm) nº 12-24 x 6.
Taille réelle indiquée
Requis pour l’assemblage :
PRÉPARATION DE L’ASSEMBLAGE
IMPORTANT : Veuillez lire et bien comprendre ce guide avant de procéder à l’assemblage.
Avant de procéder à l’assemblage de l’article, assurez-vous que toutes les pièces sont présentes.
Comparez les pièces à la liste de contenu de l’emballage. S’il manque des pièces, ou si vous
avez des questions, communiquez avec le service à la clientèle en composant le 1 866 827-6684.
Retirez toutes les pièces de la boîte dans une zone dégagée et positionnez-les sur le sol devant
vous. Ne les jetez pas avant d’avoir terminé l’assemblage. 2
LISTE DES PIÈCES
DOSSIER SIÈGE PIED GAUCHE PIED DROIT
ACCOUDOIR
GAUCHE
ACCOUDOIR
DROIT
ENFR_Canvas_Muskoka_AssemblyInstructions_JAN2020.indd 9 2020-01-06 1:49 PM

ASSEMBLAGE
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
Taille réelle indiquée
H I
(x2) (x2)
RÉPÉTEZ CETTE ÉTAPE POUR L’AUTRE CÔTÉ AVEC LE PIED GAUCHE C.
3
FLUSH
FACES OUT
H
I
B
B
D
D
I
H
Étape 1
Pièces requises : B, C, D, H, I.
Fixez le pied droit Dau siège Bau moyen du boulon Het de l’écrou I. Serrez le boulon à 95 %,
puis serrez-le complètement à l’étape 7. Assurez-vous que le bord de Dest aligné avec B.
Répétez cette étape pour l’autre côté avec le pied gauche C.
ORIENTÉ VERS
L’EXTÉRIEUR
ALIGNÉ
ENFR_Canvas_Muskoka_AssemblyInstructions_JAN2020.indd 10 2020-01-06 1:49 PM