Instruction manual CCH
Please keep this instruction manual for future reference
10
INSTALLATION
Prepare for the installation:
If you have an outlet to the outside, your cooker hood can be
connected as per the below picture by means of an extraction
duct with an interior diameter of 150mm.
Before installation, turn the unit off and unplug it from
the outlet.
The cooker hood should be placed at a minimum distance of
65~76cm above the hob. It is the manufacturer of the hob
who determines the clearance required and the clearance
quoted by the hob manufacturer must be followed. In the
absence of any instructions supplied with a gas hob the
minimum distance between the hob and the hood must be
at least 760mm.
The width of the extractor hood must correspond with at least the width of the hob
fitted below.
When installed above a gas hob or range cooker, do not use all the gas burners
simultaneously for prolonged periods of time at the maximum setting (max. 15mins).
There can be a risk of burns if the housing or extractor surfaces become hot, and
there is also a risk that the extractor can become damaged due to excessive heat.
If 3 or more burners are used simultaneously
Never operate the gas hob without pans situated on the burners as the excess heat
can damage the extractor.
4
4
4
CCH_v3.indd 10 23/07/2018 16:17
