Car-Interface CI-DAB-MMI2G Installation guide

www.car-interface.com
2. Start up
2
1
3
QUICK MANUAL
AUDI MMI 2G (CD emulation)
1. Introduction
The CI-DAB-MMI2G device is a DAB/DAB+ radio receiver. It
was designed to receive digital radio services in cars equipped
with digital sound system. CI-DAB-MMI2G support a following
service function which allow to keep track of stations while
driving.
The DAB device start after sequential pressing of buttons MEDIA 1
and SOURCE 2 on the radio control panel pic.1, then select CD
changer from list using a main navigation rotary-knob. 3
pic.1 pic.2
CI-DAB-MMI2G
DAB+/DAB Radio for CAR

www.car-interface.com
4. Selection of radio station.
3. Scanning
WATCH OUT!
In first start up of the device it is recommended to start a scan function to add new
services to list. Use a main navigation rotary-knob to start scan process pic.3.
After end of scan process to show a list of available radio stations select “Station”
option from list.
pic.3 pic.4
The list is shown in alphabetical order pic.4.
Selection of radio station from list of available services pic.5 is done using
main navigation rotary-knob and by buttons pic.6 that allow to select next or
previous station.
pic.5 pic.6