CareCo Pano 2.0 User manual

USER MANUAL
Scan me on your
phone camera
to watch our
assembly video.
PRODUCT CODE: WA02010037

PRODUCT CODE WA02010037
2
CareCo (UK) Limited, 1 Turing Court, Tel: [phone]
Great Notley, Braintree, CM77 7AT www.CareCo.co.uk
Thank you for choosing CareCo.
This manual can be viewed in PDF format at the
following URL: www.careco.co.uk
INTRODUCING YOUR NEW PANO 2.0
The Pano 2.0 is the ideal walking aid for users looking to stay active.
Its clever zimmer frame and rollator combination design makes this walker the go-to reliable aid
for users looking to gain independence in their life.
Due to CareCo’s commitment to continuous product improvement, product information and
designs are subject to change without notice. No claims can be made based on the data or
illustrations in this user manual.

3
BEFORE USE
Before you begin using your walker, please ensure you, and any persons that may assist you in
its use, take the time to read, understand and follow the instructions given within this manual
carefully.
We recommend that you keep this user manual in a safe place for future reference.
If you have any questions about use, maintenance, or safety, please contact CareCo.
KEY DEFINITIONS
This user manual contains warnings and suggestions marked with the following symbols:
WARNING! Highlights a potentially hazardous condition/situation for the user and/or
product.
SUGGESTION General suggestions and advice for operating the product.
Need help with assembly?
We’ve put together a step-by-step assembly guide to help
you get your product set up safely and correctly. Just scan
the QR code with your phone camera to play the video.

PRODUCT CODE WA02010037
4
GETTING STARTED 5
CARTON CONTENTS
PRODUCT COMPONENTS
SETTING UP YOUR PANO 2.0
HOW TO USE YOUR PANO 2.0 8
USER INSTRUCTIONS
FOLDING & UNFOLDING
BACKREST
COMFORT ADJUSTMENTS 10
HANDLE HEIGHT ADJUSTMENT
SEAT HEIGHT ADJUSTMENT
TRANSPORTATION AND STORAGE 11
TRANSPORTATION
STORAGE
LOOKING AFTER YOUR PANO 2.0 11
CLEANING
MAINTENANCE
MAINTENANCE SCHEDULE
REPAIRS
WARNINGS & TECHNICAL INFORMATION 13
SPECIFICATIONS
PRODUCT REISSUING
RECYCLING & DISPOSAL
INTENDED USE
PRODUCT IDENTIFICATION
GENERAL WARNINGS
EXPECTED LIFETIME 17
WARRANTY 18
NOTES 19
CONTENTS

5
GETTING STARTED
CARTON CONTENTS
ITEM NUMBER DESCRIPTION QUANTITY
1 Base Frame w/Seat 1
2 Backrest 1
3 Star Knob 2
4 Front Wheel Assembly 2
5 Rear Leg 2
6 Handle Assembly LHS 1
7 Handle Assembly RHS 1
Contact CareCo immediately if any of the listed contents are missing.
We strongly recommend that you keep the box and internal packaging for the duration of your
warranty period.

PRODUCT CODE WA02010037
6
PRODUCT COMPONENTS
1. Backrest
2. Star Knob
3. Base Frame
4. Seat
5. Handle
6. Rear Leg
7. Front Wheel
SETTING UP YOUR PANO 2.0
2. Insert the Front Wheels into the front
frame base.
An audible “click” will conrm secure.
1. Remove all outer packaging before placing
components on a level surface.
1
2
3
4
5
7
6
X2

7
3. Insert the Rear Legs into the rear frame
base.
An audible “click” will conrm secure.
4. Insert the Handle into the top of the frame
and secure using the star knobs provided.
5. Insert the backrest into the frame bracket.
An audible “click” will conrm secure.
6. Your new Pano 2.0 is ready to use
SUGGESTION If for any reason the walker needs to be disassembled, use the set-up
instructions as a guide to disassemble the walker.
X2
X2

PRODUCT CODE WA02010037
8
HOW TO USE YOUR PANO 2.0
USER INSTRUCTIONS
WALKING POSITION
Walk with the walker close to your body, face
forwards and ensure your back is straight.
USER CONTROL
Hold the handles with a comfortable grip and
allow your arms to sit naturally by your side.
NEGOTIATING THRESHOLDS & FIXED OBSTACLES
Tilt the front of the walker upwards when travelling through doorways and over curbs.
SITTING & RESTING
Use the seat to rest when needed, ensuring the walker is on a at, even surface.
LIFTING & CARRYING
Grasp the handles or areas of the frame that are clear from pinch points, then lift with your legs.
Hold the walker at a comfortable and manageable height when moving from one location to
another.

9
FOLDING & UNFOLDING
FOLDING
Pull the seat handle upwards to close the
walker.
UNFOLDING
Push the seat handle downwards to open the
walker.
WARNING! Keep hands and body away from cross frame pivot to avoid possible pinch
points.
BACKREST
FOLDING
Lift the backrest upwards to fold the backrest.
UNFOLDING
Lower the backrest to unfold the backrest.

PRODUCT CODE WA02010037
10
COMFORT ADJUSTMENTS
HANDLE HEIGHT ADJUSTMENT
To set the correct handle height, stand upright behind the walker with arms by side.
Adjust the height of the hand grips so they are level with the users’ wrists.
1. Loosen the star knob by turning it
anticlockwise, then remove it from the
handle bracket.
2. Lift or lower handle to the desired height.
3. Reinsert the star knob into the handle
bracket, then tighten by turning it clockwise.
4. Repeat on the opposite side.
WARNING! Ensure both handles are level and secure before use.
SEAT HEIGHT ADJUSTMENT
The seat height can be adjusted by raising or lowering the walker’s wheel & leg assemblies.
1. Press and hold the assembly height
adjustment button.
2. Raise or lower the assembly to the desired
height.
3. Release the adjustment button.
4. Repeat for the remaining three assemblies.
WARNING! Ensure the assemblies are level and secure before using the walker as a
seat.

11
TRANSPORTATION AND STORAGE
TRANSPORTATION
Ensure any accessories have been secured before transporting.
Fold the walker by lifting the seat upwards, then lift into the desired vehicle.
Position the walker appropriately within the vehicle to prevent excess movement during transit.
STORAGE
Store the product in a cool and dry environment. Do not store in extreme temperatures.
WARNING! Storing the product in extreme temperatures can cause premature
rusting & damage.
LOOKING AFTER YOUR PANO 2.0
CLEANING
To keep the walker in optimal condition, it should be cleaned regularly with a damp cloth and/or
mild soap. Do not use abrasive cleaners/materials.
Dry the product after cleaning and after use in inclement weather conditions.
MAINTENANCE
The walker is made up of components which over time will become susceptible to wear and tear.
Knowing how to properly care and maintain your product will not only ensure peak performance
and safe operation but will also help maintain operation for years to come.

PRODUCT CODE WA02010037
12
MAINTENANCE SCHEDULE
Carry out regular inspections to keep the walker in optimum condition.
REPAIRS
Certain walker components can be repaired by the user with guidance provided by CareCo. Other
components can only be repaired/replaced by a service technician.
If for any reason the walker requires repair due to a defect, contact CareCo immediately.
COMPONENT INSPECTION DESCRIPTION AT ANY TIME WEEKLY MONTHLY QUARTERLY
Fasteners Ensure all fasteners are tight
and components are not loose.
Framework
Ensure the framework is clear
from debris, damage, and folds
without issue.
Wheels & Tyres
Ensure tyres have sucient
tread and/or the wheels are in
a good condition.
Upholstery Check for wear and tear.
Overall
Overall check for wear and
residue build-up. Cleaning if
required.

13
WARNINGS & TECHNICAL INFORMATION
SPECIFICATIONS
OVERALL LENGTH 550MM
OVERALL WIDTH 610MM
MAXIMUM/MINIMUM HANDLE HEIGHT 790-950MM
FOLDED LENGTH 585MM
FOLDED WIDTH 160MM
FOLDED HEIGHT 880MM
FRONT WHEEL DIAMETER 6”
PRODUCT WEIGHT 4.7KGS
WEIGHT CAPACITY 125KGS
SEAT DEPTH 240MM
SEAT WIDTH 365MM
SEAT HEIGHT 17.5MM

PRODUCT CODE WA02010037
14
PRODUCT REISSUING
Ensure the product is safe and functions as intended before re-issuing.
RECYCLING & DISPOSAL
Disposal or recycling of the product should be completed through an approved distributor or
disposal facility. (Local disposal & recycling regulations may apply)
Contact CareCo if further advice is needed regarding recycling & disposal.
MATERIAL
Upholstery: Foam
Plastic: Tube plugs, hand grip,backrest xing base, seat, wheels, tipper
Aluminium: Mainframes, push handle, detachable leg tube, backrest tube
Steel: Seat tube, bearings
PACKAGING
Cardboard Box, Low-density polyethylene bag, PE foam

15
INTENDED USE
This product is intended for users who experience diculty in walking and/or have reduced
mobility.
INTENDED USER
To aid a user with mobility limitations to move around safely.
INTENDED ENVIRONMENT
This product is designed to be used both indoors and outdoors on rm, level ground. Take care
when using the product in inclement weather conditions.
PRODUCT IDENTIFICATION
The product identication label is located on the frame underneath the seat.
Unauthorized modications and/or installation of unapproved 3rd party components and
accessories are not permitted.
The maximum weight limit for this product includes both the user and any other accessories
tted.

PRODUCT CODE WA02010037
16
GENERAL WARNINGS
Read the following carefully to avoid damage and/or injury caused by improper operation.
• Only use the walker for its intended use, incorrect use can lead to hazardous situations.
• Only use the walker on even and solid surfaces
• Prolonged exposure to hot or cold temperatures can cause parts of the walker to become
hot or cold.
• Do not use the walker as a transportation device
• Replace damaged or signicantly worn parts if and when required.
• Do not sit on the walker when on an incline or uneven ground.

17
EXPECTED LIFETIME
The Expected Lifetime is the estimated period of time for which the product is expected to
function according to its intended use.
Various items such as weight capacity, user behaviour, external conditions and intensity of use
can aect the expected lifetime.
WEIGHT CAPACITY:
If the user exceeds the weight limit specied,
it may aect the product’s expected lifetime.
USER BEHAVIOUR:
Using excessive force, rough handling or
dropping components can signicantly
shorten the product’s expected lifetime.
EXTERNAL CONDITIONS:
Extreme temperatures, humidity and
exposure to harsh weather conditions can
accelerate the deterioration of the product.
USAGE:
A product that is used daily may experience
more wear and tear compared to a product
that is used occasionally.
The expected lifetime for the Pano 2.0 is 5 years providing the instructions and information
within this user manual are followed.
Regular cleaning, lubrication of moving parts, and tightening of loose xings will prevent
premature wear and damage and extend the product’s lifetime.
The expected lifetime is not related to the product warranty.

PRODUCT CODE WA02010037
18
WARRANTY
If a component requires repair or replacement due to a specic manufacturing or material defect
within its warranty period, it will be repaired or replaced free of charge by CareCo.
1-YEAR LIMITED WARRANTY
Consumables are not covered under normal warranty circumstances unless they have clearly
suered excessive wear or damage as a direct result of a manufacturing defect. These items
include grips, tyres, and rubber accessories.
The guarantee for the walker is not transferable.
Parts that have been previously replaced that require subsequent repair or replacement due to
manufacturing defects will be honoured for the remainder of the walker’s warranty period.
Parts that have been purchased by the end user after the original warranty period has expired
have a warranty period of 12 months.
CareCo is not responsible if the walker requires repair or replacement as a direct result of:
• Changes or modications made to the product that fall outside of the manufacturer’s
specications.
• The product not being serviced or maintained according to the manufacturer’s
recommendations contained in this user manual.
• Negligence, Accidental Damage, and Improper use.
• Repairs attempted before CareCo have been notied.
• The product being purposely damaged or mistreated.
In the unlikely event that this product is recalled, CareCo will notify the user.
Please ensure that your contact information is up to date.
Alternatively, please visit our website for any product alerts: www.CareCo.co.uk

19
NOTES

ROLLATOR
CareCo (UK) Limited, 1 Turing Court,
Great Notley, Braintree, CM77 7AT, England
Obelis, General Wahis 53-1030,
Brussels, Begium
Obelis UK Ltd, Sandford Gate, East
Point Business Park, Oxford, OX4 6LB