caron 7001-50 User manual

MODEL 7001-50
INST-PM-7001-50

Revision Log
Revisions
Description
Letter
Date
A
10-14-2016
Initial release.
B
04-03-2018
New cover.

INST-PM-7001-50 Rev B 04/03/2018
Parts Required: (1) Air Filter, (4) Velcro Discs
Tools Required: Phillips Screwdriver
Parts included in Preventative Maintenance Kit for Model 7001-50 are shown below.
Note: Photos may have a different appearance depending on chamber options.
1. Turn off chamber and unplug power cord.
2. Remove (2) screws on both sides of control panel bezel using Phillips screwdriver
as shown below. Note: Retain screws.
INSTRUCTIONS FOR REPLACING AIR FILTER IN MODEL 7001-50
REPLACING AIR FILTER
Disconnect electrical power before opening control panel bezel.
Air Filter
Velcro Discs
Control Panel Bezel Screws
Control Panel Bezel

INST-PM-7001-50 Rev B 04/03/2018
3. Lift control panel bezel up and prop open using support arms on both sides as
shown below.
4. Unfasten (4) Velcro connections on air filter and discard filter as shown below.
Note: Remove and discard any Velcro discs with loops that may still be attached
to hook discs located on condenser and replace hook discs as needed.
5. Attach new Velcro discs with loops to hook discs condenser corners with adhesive
facing outwards as shown below.
Control Panel Bezel Support Arms
Air Filter
Velcro Disc Locations

INST-PM-7001-50 Rev B 04/03/2018
6. Center new air filter with condenser edges as shown below and press into place
with cardboard side towards condenser. Note: Once adhesive has touched air
filter it cannot be adjusted.
7. Lower control panel bezel by disengaging support arms on both sides. Note:
Verify wiring harnesses are clear of control panel bezel.
8. Secure control panel bezel with retained (2) screws using Phillips screwdriver.
Note: Silver screw fastens left side of control panel bezel and black screw fastens
right side.
9. Continue to instructions for replacing additional accessory preventative
maintenance items if applicable or plug in power cord and turn on chamber.
10.Reset air filter alert by pressing Settings button on right side of Home screen as
shown below.
Settings Button
Air Filter

INST-PM-7001-50 Rev B 04/03/2018
11.Press Maint. button as shown below.
12.Press Reset button for Replace air filter as shown below.
13.Press Home button as shown below.
Maint. Button
Reset Button
Home Button