caron FLTR301 User manual

FLTR301
INST-PM-FLTR301

Revision Log
Revisions
Description
Letter
Date
A
04-20-2018
Initial release.

INST-PM-FLTR301 Rev A 04/20/2018
Parts Required: (1) Air Filter
Tools Required: Ladder, Flatblade Screwdriver (will not be necessary for 6020
or 6040 Series Chamber)
Parts included in Preventative Maintenance Kit for FLTR301 are shown below.
Note:
If installing PM-FLTR301 in a 7000-10 Series Chamber continue to REPLACING AIR FILTER
for 7000-10 SERIES CHAMBER.
If installing PM-FLTR301 in a 7000-25/33, 7340-25/33, 7350-25/33, 7400-25/33, or
7900-25/33 Series Chamber continue to REPLACING AIR FILTER for 7000-25/33, 7340-
25/33, 7350-25/33, 7400-25/33, or 7900-25/33 SERIES CHAMBER.
If installing PM-FLTR301 in a 6020 or 6040 Series Chamber continue to REPLACING AIR
FILTER for 6020 or 6040 SERIES CHAMBER.
INSTRUCTIONS FOR REPLACING AIR FILTER
Air Filter

INST-PM-FLTR301 Rev A 04/20/2018
Note: Photos may have a different appearance depending on chamber options.
1. Open chamber outer door.
2. Remove air filter cover using flatblade screwdriver as shown below. Note:
Remove air filter cover by turning screw no more than ¼ turn.
3. Remove air filter and discard as shown below.
REPLACING AIR FILTER for 7000-10 SERIES CHAMBER
Air Filter Cover Screw
Air Filter

INST-PM-FLTR301 Rev A 04/20/2018
4. Install new air filter with cardboard side towards chamber as shown below.
5. Reinstall air filter cover using flatblade screwdriver. Note: Fasten air filter cover
by turning screw no more than ¼ turn.
6. Continue to RESETTING AIR FILTER ALERT.
Note: Photos may have a different appearance depending on chamber options.
1. Remove air filter cover using flatblade screwdriver as shown below. Note:
Remove air filter cover by turning screw no more than ¼ turn.
REPLACING AIR FILTER for 7000-25/33, 7340-25/33, 7350-25/33,
7400-25/33, or 7900-25/33 SERIES CHAMBER
Air Filter with Cardboard towards Chamber
Air Filter Cover

INST-PM-FLTR301 Rev A 04/20/2018
2. Remove air filter and discard as shown below.
3. Install new air filter with cardboard side towards chamber as shown below.
4. Reinstall air filter cover using flatblade screwdriver. Note: Fasten air filter cover
by turning screw no more than ¼ turn.
5. Continue to RESETTING AIR FILTER ALERT.
Air Filter
Air Filter with Cardboard towards Chamber

INST-PM-FLTR301 Rev A 04/20/2018
1. Reset air filter alert by pressing Settings button on right side of Home screen as
shown below.
2. Press Maint. button as shown below.
3. Press Reset button for Replace air filter as shown below.
4. Press Home button as shown below.
RESETTING AIR FILTER ALERT
Settings Button
Maint. Button
Reset Button
Home Button

INST-PM-FLTR301 Rev A 04/20/2018
Note: Photos may have a different appearance depending on chamber options.
1. Remove air filter cover by pulling outward on both sides near bottom as shown
below.
2. Slide air filter out of air filter cover and discard as shown below.
3. Install new air filter with seam next to angled edge of air filter cover as shown
below. Note: Orient cardboard side of air filter towards chamber.
REPLACING AIR FILTER for 6020 or 6040 SERIES CHAMBER
Air Filter Cover
Air Filter
Angled Edge on Air Filter Cover
Air Filter Seam

INST-PM-FLTR301 Rev A 04/20/2018
4. Install air filter cover with angled edge at top while aligning air filter with guide
tracks on both sides and snap into place as shown below. Note: Right side is
shown in photos.
Guide Track