Cartft FleetPC-4-B User manual

FleetPC-4-B
In-Vehicle Computing
User's Manual
Document Name FleetPC-4-B User Manual Document No. UM2012311010
Version 1.1 Date Jan. 9, 2013
Reversion History :
Reversion Date Notes Author(s)
From To
1.0 1.0 Sept. 4, 2012 Initial document issued Stanley Chou
1.0 1.1 Jan. 9, 2013 Dual SIM Card - Front Panel Stanley Chou

CarTFT.com
User Manual
Copyright
©2009 by CarTFT.com All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval sys-
tem, translated into any language, or transmitted in any form or by any means such as
electronic, mechanical, magnetic, optical, chemical, photocopy, manual, or otherwise,
without prior written permission from CarTFT.com
Other brands and product names used herein are for identication purposes only and
may be trademarks of their respective owners.
Disclaimer
CarTFT.com shall not be liable for any incidental or consequential damages resulting
from the performance or use of this product.
CarTFT.com makes no representation or warranty regarding the content of this manual.
Information in this manual had been carefully checked for accuracy;however, no guar-
antee is given as to the correctness of the contents. For continuing product improve-
ment, CarTFT.com reserves the right to revise the manual or make changes to the
specications of this product at any time without notice and obligation to any person or
entity regarding such change. The information contained in this manual is provided for
general use by customers.
This device complies to Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions:
1. This device may not cause harmful interference.
2. This device must withstand any background interference including those that may
cause undesired operation.

CAUTION
Incorrectly replacing the battery may damage this computer. Replace only
with the same or its equivalent as recommended by CarTFT.com Dispose
used battery according to the manufacturer's instructions.
Safety Information
Read the following precautions before setting up a CarTFT.com Product.
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from the electrical
outlet before relocating the system.
• When adding or removing devices to or from the system, ensure that the power
cables for the devices are unplugged before the signal cables are connected.
If possible, disconnect all power cables from the existing system before you add a
device.
• Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord.
These devices could interrupt the grounding circuit.
• Make sure that your power supply is set to the correct voltage in your area.
If you are not sure about the voltage of the electrical outlet you are using, contact
your local power company.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your retailer.
Operation safety
• Before installing the motherboard and adding devices on it, carefully read all the
manuals that came with the package.
• Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product in any
area where it may become wet.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualied service
technician or your retailer.

TABLE OF CONTENTS
1 Function Introduction
1.1 Model Specications.......................................................................................6
1.2 FleetPC-4-B Illustration <Mainboard, System>..............................................8
1.3 Memory Module Installation .........................................................................10
1.4 Architecture .................................................................................................. 11
1.5 Principal Component Specication ..............................................................12
1.6 Internal Connector Specication ..................................................................13
■ VGA Connector ...........................................................................................13
■ USB Connector ...........................................................................................14
■ GPIO Connector .........................................................................................16
■ UART and GPIO Connector........................................................................17
■ LED Connector ...........................................................................................18
■ COM Connector ..........................................................................................19
■ Audio Connector .........................................................................................23
■ SATA Connector..........................................................................................24
■ Mini PCI-E Connector .................................................................................26
■ Power Input Connector ...............................................................................28
■ SATA Power Connector...............................................................................29
1.7 External Connector Specication .................................................................31
■ USB Connector ...........................................................................................31
■ LAN Connector ...........................................................................................32
■ DVI-I Connector ..........................................................................................34
■ COM Connector ..........................................................................................35
1.8 Ignition Power Management Quick Guide....................................................36
2 System Installation
2.1 System Introduction .....................................................................................38
2.2 Opening Chassis..........................................................................................39
2.3 Installing Memory .........................................................................................40
2.4 Installing HDD / SSD....................................................................................41
2.5 Installing MINI PCI Express Expansion Card...............................................42
2.6 Installing MINI PCI Express Expansion Card...............................................43
2.8 Installing SIM Card.......................................................................................44
2.9 Installing Battery Module..............................................................................45

5
English
3 BIOS
3.1 Entering The BIOS .........................................................................................46
3.2 Main................................................................................................................48
3.3 Advanced .......................................................................................................49
3.4 Boot................................................................................................................55
3.5 Security ..........................................................................................................56
3.6 Chipset ...........................................................................................................57
3.7 Exit .................................................................................................................59
4 Packing List
4.1 Packing List ..................................................................................................60

6
English
1 Function Introduction
1.1 Model Specifications
CPU • Intel Cedarview Atom D2550 Dual Core 1.8GHz Processor
Chipset • Intel NM10
Memory • 1 x DDR3 1066MHz SO-DIMM up to 4GB
Graphics • Intel GMA3650
ATA • 2 x Serial ATA 2.0 Ports
LAN Chipset • 2 x Realtek 8111E Gigabit Ethernet
Watchdog • 1 ~ 255 level reset
Serial Port • Suuport 2 x RS-232 (COM1 with RS-232/422/485)
USB Port • 3 x USB 2.0 ports
LAN • 2 x RJ45 ports for GbE
Video Port • 1 x DVI-I Female Connector for DVI-D and VGA Output
GPIO Port • Support 2 in and 2 out with Relay 12V / 100mA
Audio • Mic-in/Line-out
Expansion Bus • 3 x Mini-Card Slots
SIM Card Socket • 2 x SIM Card sockets supported onboard with eject

7
English
Antenna • 4 x SMA-type External Antenna Connectors for WLAN / UMTS / GSM /
GPRS / GPS / Bluetooth
Storage • 1 x 2.5" drive bay for SATA Type Hard Disk Drive / SSD
• 1 x SATA DOM
Qualication • CE, FCC Class A, eMark Compliance
Power Input • 9V - 32V DC Power Input
Power Management • Vehicle Power Ignition for Variety Vehicle
Power Off Control • Power off Delay Time Setting by Software, Default is 5 Mins
Backup Battery • Internal Battery Kit for 10 Mins Operating (Optional)
Operating Temp. • -40 ~ 70°C (SSD), ambient w/ air
Storage Temp. • -40 ~ 80°C
Relative Humidity • 10 ~ 90% (non-condensing)
Vibration • MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle-Highway
Truck Storage • MIL-STD-810F, Method 514.5, Category 24, Integrity Test
Shock • Operating : MIL-STD-810F, Method 516.5, Procedure I, Trucks and
semi-trailers=40G (11ms) with 80G with SSD
Crash Hazard • MIL-STD-810F, Method 516.5, Procedure V, Ground Equipment=100g
Construction • Aluminum alloy
Mounting • Supports both of wall-mount/VESA-mount
Weight • 1406g
Dimensions • 182 x 167.6 x 52 mm

8
English
1.2 FleetPC-4-B Illustration

Mainboard

9
English

System

10
English
1.3 Memory Module Installation
The FleetPC-4-B provide one 204pins SODIMM slot for DDR3 1066MHz SDRAM
memory modules and supports memory sizes up to 4GB.
These DIMM slots are inteded for memory modules.
DDR3 SO-DIMM Slot
204-pin, 1.5V
Installing Memory Module
1. Locate the DIMM1 SO-DIMM slot. Align the notch on the DIMM with the key on the
slot and insert the DIMM into the slot at 45-degree angle.
2. Push the DIMM gently forwards until the slot levers click and lock the DIMM in place.
Follow the same procedures to install the second DIMM if necessary.
3. To uninstall the DIMM, ip the slot levers outwards and the DIMM will be released
instantly.
Important
You can barely see the golden nger if the DIMM is properly inserted in the DIMM slot.

11
English
1.4 Architecture

12
English
1.5 Principal Component Specification
CPU
South Bridge

13
English
1.6 Internal connector specification

14
English

15
English

16
English

17
English

18
English

19
English

20
English