Cartft FleetPC-8-i7C User manual

FleetPC-8-i7C
In-Vehicle Computing
User's Manual
Version 1.0
Document Name FleetPC-8-i7C
User Manual Document No. UM2018361110-2
Version 1.0 Date July 23, 2018
Reversion History :
Reversion Date Notes Author(s)
From To
1.0 July 23, 2018 Initial Document Issued Stanley Chou

CarTFT.com e.K.
User Manual
Copyright
©2009 by CarTFT.com e.K. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system,
translated into any language, or transmitted in any form or by any means such as
electronic, mechanical, magnetic, optical, chemical, photocopy, manual, or otherwise,
without prior written permission from CarTFT.com e.K.
Other brands and product names used herein are for identification purposes only and
may be trademarks of their respective owners.
Disclaimer
CarTFT.com e.K. shall not be liable for any incidental or consequential damages resulting
from the performance or use of this product.
CarTFT.com e.K. makes no representation or warranty regarding the content of this
manual. Information in this manual had been carefully checked for accuracy; however,
no guarantee is given as to the correctness of the contents. For continuing product
improvement, CarTFT.com e.K. reserves the right to revise the manual or make changes
to the specifications of this product at any time without notice and obligation to any
person or entity regarding such change. The information contained in this manual is
provided for general use by customers.
This device complies to Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must withstand any background interference including those that may
cause undesired operation.
User’s Manual Page 2

Safety Information
Read the following precautions before setting up a CARTFT.COM Product.
Electrical safety
To prevent electrical shock hazard, disconnect the power
cable from the electrical outlet before relocating the system.
When adding or removing devices to or from the system,
ensure that the power cables for the devices are unplugged before the signal
cables are connected. If possible, disconnect all power cables from the existing
system before you add a device.
Before connecting or removing signal cables from the
motherboard, ensure that all power cables are unplugged.
Seek professional assistance before using an adapter or
extension cord. These devices could interrupt the grounding circuit.
Make sure that your power supply is set to the correct
voltage in your area. If you are not sure about the voltage of the electrical outlet
you are using, contact your local power company.
If the power supply is broken, do not try to fix it by
yourself. Contact a qualified service technician or your retailer.
Operation safety
Before installing the motherboard and adding devices on
it, carefully read all the manuals that came with the package.
Before using the product, make sure all cables are
correctly connected and the power cables are not damaged. If you detect any
damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and
staples away from connectors, slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not
place the product in any area where it may become wet.
Place the product on a stable surface.
If you encounter technical problems with the product,
contact a qualified service technician or your retailer.
User’s Manual Page 3

CAUTION
Incorrectly replacing the battery may damage this computer. Replace only with the
same or its equivalent as recommended by CarTFT.com e.K. Dispose used battery
according to the manufacturer's instructions.
Technical Support
Please do not hesitate to call or e-mail our customer service when you still cannot fix
the problems.
Tel : [phone]
Fax : [phone]
E-mail : [email protected]
Website : www.cartft.com
User’s Manual Page 4

TABLE OF CONTENTS
Page #
1.0Introduction..........................................................................................................................................................8
1.1 Model Specification.........................................................................................................................................8
1.2 VBOX-3611-4L Illustration (MB, System).................................................................................................10
1.3 Architecture...................................................................................................................................................12
1.4 Principal component Specification..............................................................................................................12
2.0INTERNAL CONNECTOR................................................................................................................................14
2.1 MINI PCI-E Connector (MINICARD1).....................................................................................................14
2.2 MINI PCI-E Connector (MINICARD2).....................................................................................................16
2.3 MINI PCI-E Connector (MINICARD3).....................................................................................................17
2.4 NGFF Connector...........................................................................................................................................19
2.5 DIO1 JST Connector....................................................................................................................................22
2.6 COM JST Connector (COM3)....................................................................................................................23
2.7 COM JST Connector (COM4)....................................................................................................................24
2.8 USB JST Connector (USB3)........................................................................................................................25
2.9 SATA Connector...........................................................................................................................................26
2.10 LINE IN JST Connector............................................................................................................................27
2.11 SATAPWR JST Connector........................................................................................................................28
2.12 VGA JST Connector...................................................................................................................................29
2.13 UPS JST Connector....................................................................................................................................30
2.14 BAT Power Connector...............................................................................................................................31
3.0External Connector Specification......................................................................................................................34
3.1 DP Connector................................................................................................................................................34
3.2 DVI Connector..............................................................................................................................................35
3.3 DC PWR Connector.....................................................................................................................................36
3.4 COM Connector (COM1)............................................................................................................................37
3.5 COM Connector (COM2)............................................................................................................................38
3.6 USB3.0 Connector (USB1)...........................................................................................................................39
3.7 USB3.0 Connector (USB2)...........................................................................................................................40
3.8 PWROUT Connector...................................................................................................................................41
4.0System Installation..............................................................................................................................................44
User’s Manual Page 5

4.1 System Introduction.....................................................................................................................................44
4.2 Opening Chassis............................................................................................................................................45
4.3 Installing Memory.........................................................................................................................................47
4.4 Installing MINI PCIe Expansion Card (PCIe 1, 3G/LTE Module only).................................................49
4.5 Installing MINI PCIe Expansion Card (PCIe 2)........................................................................................51
4.6 Installing MINI PCIe Expansion Card (PCIe 3)........................................................................................53
4.7 Installing M.2 Module..................................................................................................................................55
4.8 Installing Internal Antenna Cable...............................................................................................................56
4.9 Installing SIM Card......................................................................................................................................61
4.10 Installing HDD............................................................................................................................................63
5.0System Resource..................................................................................................................................................67
5.1 Ignition Power Management Quick Guide.................................................................................................67
6.0BIOS....................................................................................................................................................................71
6.1 Enter The BIOS............................................................................................................................................71
6.2 Main...............................................................................................................................................................73
6.3 Advanced.......................................................................................................................................................74
6.4 Chipset...........................................................................................................................................................80
6.5 Boot................................................................................................................................................................83
6.6 Security..........................................................................................................................................................85
6.7 Exit.................................................................................................................................................................86
7.0Packing List.........................................................................................................................................................88
7.1 Packing List...................................................................................................................................................88
User’s Manual Page 6

1.0 Introduction
1.0
INTRODUCTION
User’s Manual

1.0 Introduction
1.0 INTRODUCTION
1.1 Model Specification
System
CPU
Intel Gen 6 Core i7-6600U 2.6GHz up to 3.4GHz
Intel Gen 6 Core i5-6300U 2.4GHz up to 3.0GHz
Intel Gen 6 Core i3-6100U 2.3GHz
Intel Gen 6 Dual Core 3955U 2.0GHz
Memory 2 x DDR4 2133MHz SO-DIMM up to 32GB
Chipset Intel 6th Generation Core SoC Processor
LAN Chipset Intel I210-AT Gb/s Ethernet Controllers Onboard
Support PXE and WOL
Audio Realtek ALC662 HD Codec onboard
Watchdog Watchdog Timer Support, Offer 1 – 255 Step
TPM 2.0
Power Requirement
Power Input 9V-48V DC Power input
Power Protection Automatics Recovery Short Circuit Protection
Power Management Vehicle Power Ignition for Variety Vehicle
Power Off Control Power off Delay Time Setting by BIOS and Software
Battery Internal Battery Kit for 10 Mins Operating (Optional)
Storage
Type 2 x 2.5” Drive Bay for SATA Type HDD / SSD, Support RAID 0, 1, 5
1 x SATA DOM
User’s Manual Page 8

1.0 Introduction
Graphics
Graphics
Intel® HD Graphics 520
DirectX Video Acceleration (DXVA) for Accelerating Video
Processing - Full AVC/VC1/MPEG2 HW Decode
Supports DirectX 11/10.1/10/9 and OpenGL 4.0
Resolution Max Resolution (HDMI 1.4) : 4096 x 2304@24Hz
Max Resolution (DP) : 4096 x 2304@60Hz
I/O
Serial Port 4 x RS-232 (2 with RS-422/485 (Auto Direction Control))
USB Port 2 x USB 3.0 Ports, 2 x USB 2.0 Ports
LAN 4 x RJ-45 Ports for GbE POE (1 port with iAMT)
Video Port 1 x DVI-I*, 1 x VGA and 1 x DP (support Triple Independent Display)
*Use only with Single Link DVI Cables.
DIO Port 4 in and 4 out
Audio 1 x Line-out and 1 x Mic-in (Line-in Optional)
SIM Card Socket 2 x SIM Card sockets supported onboard with eject
Expansion Bus 3 x mini-PCIe cards, 1 x M.2 2230 A-E Key
Environment
Operating Temp. -40ºC ~ 70ºC
Storage Temp. -40ºC ~ 85ºC
Relative Humidity 0% RH– 95% RH
Vibration (random) IEC60068-2-64, random, 2.5G@5~500Hz, 1hr/axis with SSD
Vibration Operating MIL-STD-810G, Method 514.6, Procedure I, Category 4
Shock Operating: MIL-STD-810G, Method 516.6, Procedure I,
Trucks and semi-trailers=15G (11ms) with SSD
Crash Hazard MIL-STD-810G, Method 516.5, Procedure V,
Ground equipment=100
Certifications CE, FCC Class A, E-13
Mechanical
Construction Aluminum alloy
Mounting Supports both of wall-mount/VESA-mount
Weight 1.980 kg (bare-bone)
Dimensions 250 x 150 x 55 mm
User’s Manual Page 9

1.0 Introduction
1.2 FleetPC-8-i7C Illustration (MB, System)
Main Board
User’s Manual Page 10

1.0 Introduction
System
User’s Manual Page 11

1.0 Introduction
1.3 Architecture
1.4 Principal component Specification
CPU
Chip Description
Intel 1. Power consumption:
CPU Core Frequency Cache TDP Tj
i7-6600U 2.6 GHz 4MB 15 W 100°C
i5-6300U 2.4 GHz 3MB 15 W 100°C
i3-6100U 2.3 GHz 3MB 15 W 100°C
Celeron 3955U 2.0 GHz 2MB 15 W 100°C
User’s Manual Page 12

2.0 Internal Connector Specification
2.0
INTERNAL CONNECTOR
SPECIFICATION
User’s Manual

2.0 Internal Connector Specification
2.0 INTERNAL CONNECTOR
2.1 MINI PCI-E Connector (MINICARD1)
Connector size 2 X 26 = 52 Pin
Connector type MINI PCI-E CON 9.2mmH
Connector
location
MINICARD1
Connector pin
definition
Pin Signal Pin Signal
1 PCIE_WAKE# 2 3VSB
3 NC 4 GND
5 NC 6 NC
7 NC 8 UIM_PWR_A
9 GND 10 UIM_DAT_A
11 NC 12 UIM_CLK_A
13 NC 14 UIM_RST_A
15 GND 16 NC
17 NC 18 GND
19 NC 20 MINICARD0_DIS#
21 GND 22 PCIE_RST#
23 NC 24 3VSB
25 NC 26 GND
27 GND 28 NC
29 GND 30 NC
31 NC 32 NC
33 NC 34 GND
35 GND 36 USB_4N
37 GND 38 USB_4P
39 3VSB 40 GND
41 3VSB 42 LED_WWAN_A#
43 GND 44 NC
45 NC 46 NC
47 NC 48 NC
49 NC 50 GND
51 NC 52 3VSB
User’s Manual Page 14

2.0 Internal Connector Specification
Connector map
User’s Manual Page 15

2.0 Internal Connector Specification
2.2 MINI PCI-E Connector (MINICARD2)
Connector size 2 X 26 = 52 Pin
Connector type MINI PCI-E CON 9.2mmH
Connector
location
MINICARD2
Connector pin
definition
Pin Signal Pin Signal
1 PCIE_WAKE# 2 3VSB
3 NC 4 GND
5 NC 6 +1.5V
7 MINICARD2_CLKREQ# 8 UIM_PWR_B
9 GND 10 UIM_DAT_B
11 PCIE1_MCARD2_CLK_DN 12 UIM_CLK_B
13 PCIE1_MCARD2_CLK_DP 14 UIM_RST_B
15 GND 16 NC
17 NC 18 GND
19 NC 20 MINICARD2_DIS#
21 GND 22 PCIE_RST#
23 PCIE1_MCARD2_RX_N 24 3VSB
25 PCIE1_MCARD2_RX_P 26 GND
27 GND 28 +1.5V
29 GND 30 SMB_CLK
31 PCIE1_MCARD2_TX_N 32 SMB_DATA
33 PCIE1_MCARD2_TX_P 34 GND
35 GND 36 USB_5N
37 GND 38 USB_5P
39 3VSB 40 GND
41 3VSB 42 NC
43 GND 44 NC
45 NC 46 NC
47 NC 48 +1.5V
49 NC 50 GND
51 NC 52 3VSB
User’s Manual Page 16

2.0 Internal Connector Specification
Connector map
2.3 MINI PCI-E Connector (MINICARD3)
User’s Manual Page 17

2.0 Internal Connector Specification
Connecto
r size
2 X 26 = 52 Pin
Connecto
r type
MINI PCI-E CON 9.2mmH
Connecto
r location
MINICARD3
Connecto
r pin
definition
Pin Signal Pin Signal
1 PCIE_WAKE# 2 3VSB
3 NC 4 GND
5 NC 6 +1.5V
7 MINICARD3_CLKREQ# 8 NC
9 GND 10 NC
11 PCIE2_MCARD3_CLK_DN 12 NC
13 PCIE2_MCARD3_CLK_DP 14 NC
15 GND 16 NC
17 NC 18 GND
19 NC 20 MINICARD3_DIS#
21 GND 22 PCIE_RST#
23 PCIE2_MCARD3_RX_N 24 3VSB
25 PCIE2_MCARD3_RX_P 26 GND
27 GND 28 +1.5V
29 GND 30 SMB_CLK
31 PCIE2_MCARD3_TX_N 32 SMB_DATA
33 PCIE2_MCARD3_TX_P 34 GND
35 GND 36 USB_9N
37 GND 38 USB_9P
39 3VSB 40 GND
41 3VSB 42 NC
43 GND 44 NC
45 NC 46 NC
47 NC 48 +1.5V
49 NC 50 GND
51 NC 52 3VSB
User’s Manual Page 18

2.0 Internal Connector Specification
Connecto
r map
2.4 NGFF Connector
User’s Manual Page 19

2.0 Internal Connector Specification
Connecto
r size
2 X 34 = 67 Pin
Connecto
r type
NGFF _AE KEY_H:8.5mm
Connecto
r location
NGFF1
Connecto
r pin
definition
Pin Signal Pin Signal
1 GND 2 3VSB
3 USB_7P 4 3VSB
5 USB_7N 6 NC
7 NC 8 NC
9 NC 10 NC
11 NC 12 NC
13 NC 14 NC
15 NC 16 NC
17 NC 18 NC
19 NC 20 NC
21 NC 22 NC
23 NC 24 KEY
25 KEY 26 KEY
27 KEY 28 KEY
29 KEY 30 KEY
31 KEY 32 NC
33 GND 34 NC
35 PCIE9_M.2_TX_0P 36 NC
37 PCIE9_M.2_TX_0N 38 NC
39 GND 40 NC
41 PCIE9_M.2_RX_0P 42 NC
43 PCIE9_M.2_RX_0N 44 NC
45 GND 46 NC
47 PCIE9_M.2_CLK_0P 48 NC
49 PCIE9_M.2_CLK_0N 50 NC
51 GND 52 M.2_RST
53 M.2_CLKREQ0# 54 M.2_DIS2#
55 PCIE_WAKE0# 56 M.2_DIS1#
57 GND 58 NC
59 NC 60 NC
61 NC 62 NC
63 GND 64 NC
65 NC 66 PCIE_RST#
67 NC 68 M.2_CLKREQ1#
69 GND 70 PCIE_WAKE0#
71 NC 72 NC
73 NC 74 NC
75 GND
User’s Manual Page 20