Case Dulwich Installation guide

Dulwich
Bar Table
Care Instructions
Case Furniture Ltd
London, SW18 2HZ
United Kingdom
[email protected]
casefurniture.com
Dulwich Bar Table – designed by Matthew Hilton
To prolong the life of the product and retain its appearance and functionality,
we would like to give you some relevant information and care advice:-
This unit is manufactured with either oak, black stained oak or walnut.
Craftsmen manufacture this product and there is variety between each unit. This is
because wood is a natural product, with natural colour and grain variations.
Natural timber is affected by sunlight; this can can the wood colour to darken.
For this reason (especially if placed in direct sunlight) it is recommended that placing
objects in the same position for long periods of time is avoided. This potential colour
adjustment becomes less relevent as the product ages.
It is recommended that no abrasive cleaners or solvents are used to clean the unit.
Please only use proprietary furniture polishes or alternatively, warm water with
a diluted mild detergent.
We thank you for purchasing this product and wish you many years of enjoyable and
functional use.
For more related products please visit: casefurniture.com

Fitting D should be added to the
crossbar before attempting to
connect it to the leg frame. Turn
clockwise to tighten using the
larger allen key E.
1
Assembly Instructions
A x4 B x6 C x2 E x1 F x1
Provided
D x2
Required
Place leg frame over dowels A
and loosly tigten bolts B.
A
2
B x3
F
With one person supporting the
leg frame and cross bar, the
second person should tighten
tting D.
C
Bolt C should be fully tigtened, a
at head screwdriver should be
used to help with this.
With one person still supporting
the leg frame and crossbar, the
second person should repeat
steps 2 - 3 on the remaining leg
frame.
Once the second leg frame is in
position, bolts B can be fully
tightened. Two people should
now turn the table onto its feet.
E
D
3
4
B x3
C
D
Insert dowels A.