Case Cross Fixed Table 100153725 User manual

PRODUCT CARE
Cross Fixed Table - designed by Matthew Hilton
In order to understand and get pleasure and longevity from the
product we would like to give you some information: -
• The table is manufactured using Oak or Walnut. The legs and underframe
are solid and the top and extension leaves are veneered board for greater
stability.
• Skilled craftsmen manufacture this product and there is variety between
each table. Wood is a natural product and colour and grain variations
are inevitable.
• Natural timber is affected by sunlight; this can cause the wood colour
to darken. For this reason (especially if placed in direct sunlight) it is
recommended that placing objects long periods in the same position is
avoided. This colour adjustment
as the wood stabilizes.
becomes less relevant with the passing of time
• It is recommended that no abrasive cleaners or solvents
are used to clean the unit, please only use proprietary furniture
polishes or warm water with diluted detergent.
We thank you for purchasing the product and wish you many years of
enjoyable and functional use.
For more related products please visit: - www.casefurniture.com
Cross Fixed Table
by Matthew Hilton
Case Furniture Ltd.
London SW18 2HZ
United Kingdom
[email protected]
www.casefurniture.com

Cross Fixed Table
by Matthew Hilton Assembly Instructions
1. Unpack all components and allow
ample room for assembly and turning.
2. Illustration 1. Attach brackets (B) to all
legs using allen key (A) and bolt (D).
ENSURE THAT BRACKETS ARE THE
CORRECT WAY UP.
3. With bolts (E) lift the crossbar in between
the leg bracket and tighten bolts fully.
4. Illustration 2. Turn legs and crossbar
assembly onto its feet - take bracket (C)
with 4x bolts (D) per side and securely
fasten into the top of each leg on both
sides. Once fully tightened, turn assembly
upside down.
5. Illustration 3. Turn upside down and
Insert dowels (F) into the relevant holes
on the underframe.
6. Fasten all legs to the underframe using
long bolts (H) and medium bolts (G)
and allen key (A) into relevant holes in the
leg. Using small bolt (E) secure plate (C)
to table top.
WARNING: ONLY SMALL BOLT (E)
CAN BE USED TO SECURE PLATE (C)
TO TABLE TOP.
7. Once the legs and crossbar are tightly
fastened, the table can be turned onto
its feet.
NOTE: THE TABLE IS EXTREMELY HEAVY.
TAKE EXTRA CARE WHEN TURNING.
1
2
E
A x 1 D x 16 F x 8 G x 4 H x 4E x 6
D
A
B x 2
B
C x 2
A
GH
E
F
C
D
3