Case Eos Outdoor Rectangular Table 601764 User manual

Eos Outdoor Rectangular Table
designed by Matthew Hilton
PRODUCT CARE
Eos Outdoor Rectangular Table – designed by Matthew Hilton
To prolong the life of the product and retain its appearance and functionality,
we would like to give you some relevant information and care advice:-
Made from extruded aluminium, the Eos range is durable, light-weight,
rustproof and low maintenance. Regular periodic care and cleaning is recommended
over occasional heavy duty maintenance.
The table frame and slats are finished in a hardwearing powdercoat which can
be cleaned using a sponge / soft bristle brush with a cleaning solution of mild
liquid soap and lukewarm water. Use of abrasive cleaners should be avoided.
Rinse and dry thoroughly for best finish.
Caution: In seaside use, salt can accumulate on the finish, leading to finish failure.
In indoor pool areas, chlorides can accumulate on the finish, leading to finish failure.
In both of these environments, repeated cycles of condensation followed by
evaporation cause build-up of these aggressive corrosives. Regular cleaning with mild
soap and water will remove the concentrated deposits and protect the furniture finish
per the above instructions.
Although the materials and finishes used are selected for their ‘all-weather / year-round’
characteristics, we recommend that the product is disassembled and stored during cold
and wet winter months.
If stored fully assembled the table should not be stored upside down.
We thank you for purchasing this product and wish you many years of enjoyable and
functional use.
For more related products please visit: www.casefurniture.co.uk
Case Furniture Ltd.
London SW4 6BB
United Kingdom
[email protected]
www.casefurniture.co.uk

Eos Outdoor Rectangular Table Assembly Instructions
CF-MH800/BLK.V.1.1
designed by Matthew Hilton
A x 1 B x 2 C x 10 D x 10 E x 1
1
2
A
DC
E
B
B