Case Bridge Installation guide

Bridge
Extending Table
Care Instructions
Case Furniture Ltd
London, SW18 2HZ
United Kingdom
[email protected]
casefurniture.com
Bridge Extending Table – designed by Matthew Hilton
To prolong the life of the product and retain its appearance and functionality,
we would like to give you some relevant information and care advice:-
This unit is manufactured with either oak or walnut.
Craftsmen manufacture this product and there is variety between each unit. This is
because wood is a natural product, with natural colour and grain variations.
Natural timber is affected by sunlight; this can can the wood colour to darken.
For this reason (especially if placed in direct sunlight) it is recommended that placing
objects in the same position for long periods of time is avoided. This potential colour
adjustment becomes less relevent as the product ages.
It is recommended that no abrasive cleaners or solvents are used to clean the unit.
Please only use proprietary furniture polishes or alternatively, warm water with
a diluted mild detergent.
We thank you for purchasing this product and wish you many years of enjoyable and
functional use.
For more related products please visit: casefurniture.com

Assembly Instructions
A x 1
B x 8
When storing the leaves in the leaf bag:
Please ensure when storing the leaves in the leaf
storage bag provided that each leaf is placed in an
individual compartment and that the connecting
clips are facing outwards to avoid damaging the
leaves.
C x 8
CC
Required
Step 1.
place 2 x Dowels (Fitting
C) in the outer holes on the
leg and slide the leg into
place.
Step 2.
locate 2 x bolt’s (Fitting B) into
the two holes on the leg and
tighten fully with the allen key
(Fitting A) B