6
Wi-Fi Connection
1. Search“CATLINK" in mobile phone application market, download and install CATLINK
APP, or scan the right QR code for download:
2. Connect the 2.4GHz Wi-Fi. The 5GHz frequency range, as well as the WiFi requiring special authentication in
hotel and airport, is not supported yet.
* Wi-Fi name should not contain Chinese, space or other special characters to avoid affecting the Wi-Fi
connection.
3. Open CATLINK APP to register and login.Find and click "Add device" -> "CATLINK Feeder" and follow the tips.
* Please authorize the location information. GPS should be enabled for Android mobile phone.
4. Long press the Wi-Fi connection button of feeder, release it when hearing the “Beep” sound and indicator is
flickering in green.
*Keep the product close to router as much as possible and make sure it is powered on.
5. Click "Next" on CATLINK APP, enter Wi-Fi password, click "Next" and wait for success of Wi-Fi connection.
*For any connection failure, please repeat the operation and check if Wi-Fi password is entered correctly.
For any unsmooth connection of some Android mobile phone, please use other mobile phones for Wi-Fi
connection if possible and when it succeeds, switch to your mobile phone for normal use. If connection
fails after correct operation for multiple times, please contact the after-sales service.
6. When CATLINK APP prompts success connection, scan the QR code on the side of the Feeder for binding.
7. After completing the above steps, APP related functions can be use normally.
The Wi-Fi Connection Button
at rear side of the product
