CatLink Scooper Standard Pro User manual

Shanghai Catlink Intelligent Technology Co., Ltd
User Manual
Link everything for cat’s life.
3）Make sure that the device is close to the Wi-Fi signal and far away from electrical appliances with
strong interference.------------------------------------------------------------------------------please refer to picture 5.3
CATLINK AI Cat Litter Box - Scooper
Pro Version

3）Make sure that the device is close to the Wi-Fi signal and far away from electrical appliances with
strong interference.------------------------------------------------------------------------------please refer to picture 5.3

【Unpacking Operation】
【Packing List】
【Product Structure】
【Function Differences】
【Working Mode 】
【Protection Mechanism】
【Control Panel & Button Operation】
【Indicator Conditions】
【Wi-Fi Connection】
【Cat Litter Replacement】
【Product Cleaning and Attentions】
【Exception Dealing】
【Product Specifications & CATLINK Features】
【After-sale Service】
【Service Card】
1
3
4
5
6
7
8
10
12
15
16
18
20
25
26
【Contents】
3）Make sure that the device is close to the Wi-Fi signal and far away from electrical appliances with
strong interference.------------------------------------------------------------------------------please refer to picture 5.3

【 Unpacking Operation】
Check whether the items are complete according to the 【Packing List】(Page 3).
Place the product properly according to the【Product structure】（Page 4）.
Insert the power adapter into the power port at the back of the product.
-----------------------------------------------------------------------------------------------------------please refer to picture 3.1
Check whether the waste bag is properly inserted, and properly push the waste box back to its original
position.-----------------------------------------------------------------------------------------------please refer to picture 4.1
Use environment check:
1）Make sure that the device is placed on a flat and solid ground with no other object at the
bottom.------------------------------------------------------------------------------please refer to picture 5.1
2）Make sure that the device is not dependent on any object around, and there is no other
objects are placed on the top.--------------------------------------------------please refer to picture 5.2
【Picture 3.1】 【Picture 4.1】
3）Make sure that the device is close to the Wi-Fi signal and far away from electrical appliances with
strong interference.------------------------------------------------------------------------------please refer to picture 5.3
1
2
3
4
5
p1

When the power is turned on, the device will automatically turn on and wait for the device to
complete the self-check (the ball cabin will reset and stop after turning counterclockwise and
clockwise each half a turn).
【Picture 5.1】 【Picture 5.2】 【Picture 5.3】
p2
3）Make sure that the device is close to the Wi-Fi signal and far away from electrical appliances with
strong interference.------------------------------------------------------------------------------please refer to picture 5.3
6
p2

【Packing List】
Download the CATLINK APP and refer to
【Wi-Fi Connection】(Page12 ) for network
connection.
Add enough cat litter to the ball cabin,
paying attention to be below the Max line.
The litter box can be used normally when the above steps are completed.
Pro version is suitable for bentonite cat litter, mixed cat litter (bentonite & tofu
litter).Stan-dard/Luxury/Young version is suitable for bentonite cat litter only.
Power
Adapter
Roll
of Garbage Bags
Activated carbon cotton filter
The cotton filter has been placed in the waste box.
Catlink recommends taking it out and shining it once
a month and replacing it every two months.
User Manual
(Service Card included)
CATLINK
AI litter Box
3）Make sure that the device is close to the Wi-Fi signal and far away from electrical appliances with
strong interference.------------------------------------------------------------------------------please refer to picture 5.3
p3
7
8
9
Note:

【Product Structure】
Cover
Ball Cabin
Base
Waste Box
3）Make sure that the device is close to the Wi-Fi signal and far away from electrical appliances with
strong interference.------------------------------------------------------------------------------please refer to picture 5.3
p4
1
2
3
4

【Function Differences】
Note:
The ambient light function can be turned on through the CATLINK APP. When this function is turned on, the
light will be automatically turned off during the day and the light will be turned on automatically at night.
This function is to take care of cats with poor eyesight or elderly cats.
Ambient light
Temperature and humidity sensing
Cat litter volume monitoring
Protection from weighing sensors
Anti-pinch protection
Radar protection
UV sterilization
StandardFunction Luxury Standard Pro Luxury Pro
×
×
×
✓
✓
×
×
✓
✓
✓
✓
✓
×
×
×
×
×
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
3）Make sure that the device is close to the Wi-Fi signal and far away from electrical appliances with
strong interference.------------------------------------------------------------------------------please refer to picture 5.3
p5

【Working Mode】
Mode Icon of App
&Control panel Operation method Notifications
Auto mode
Manual Mode
Timer Mode
Empty Mode
In this mode, if the device detects a
cat's entering and leaving, it will
automatically clean the ball cabin once
after the safe time has passed
In this mode, you can start or pause the
filter cat litter by manual
In this mode, you can set a time to
start cleaning automatically (Wi-Fi
connection only)
In this mode, you can press the
Clean/Pause button to empty the cat
litter
Operation through APP
&Control panel button
p6

【Protection Mechanism】
Protective
function Priority
level Notifications
Radar protection
*Only supported
by Pro version
Protection
from weighing
Anti-pinch
protection
Anti-blocking
protection
1st
2nd
3rd
4th
The radar protection will be activated when a moving object enters
the ball cabin, and the ball cabin will stop rotating; The ball cabin will
rotation again when the object is confirmed to leave.
The ball cabin will stop rotating when an object larger than 1.5kg
enters the ball cabin and the gravity protection is activated;The ball
cabin will rotation again when the object is confirmed to leave.
When the ball cabin's litter outlet is facing downwards and the anti-pinch
device is started during rotation, the ball cabin will release the maximum
litter outlet space and stop running. This protection can only be lifted
after human intervention.
The ball cabin will stop rotating when the motor resistance suddenly
increases during the rotation of the ball cabin. This protection can only be
cancelled with human intervention.
p7

Mode button
The mode will be switched in order from Auto, Manual, Timer, Empty in a cyclic manner each time you
press the button.
Note: The timer mode only works with Wi-Fi connection.
Clean/Pause button
Press the button to start or stop the operation.
Note: This button only works in the manual mode and the empty mode.
【Control Panel】
【Button Operation】
Error
indicator
Wi-Fi
indicator
Panel lock
indicator
Auto mode
indicator
Timer Mode
indicator
Clean/Pause
button
Manual Mode
indicator
Empty Mode
indicator
Mode
button
p8
1
2

Panel locking button
Press and hold the Mode button and the Clean/Pause button for three seconds.
Release the buttons when you hear a beep. If the Panel lock indicator is on, the panel locking is
successfully enabled. If you want to disable the panel locking, repeat the above-mentioned
operations. If the Panel lock indicator is off, the panel locking is successfully disabled.
Note: This key can also be turned on or off on CATLINK APP.
Wi-Fi connection button
Press and hold the Mode button and the Clean/Pause button.
Release the button when you hear the second beeping sound. If the Wi-Fi connection indicator blinks,
the device is ready for network configuration.
If the Wi-Fi connection is instantly on after you release the buttons, the network configuration has
been completed and the device is already connected to the network. In this case, you can skip the
network configuration and proceed to the next step.
Note: This function only works when there is no Wi-Fi connection.
p9
3
4

【Indicator Conditions】
Indicator Lighting
conditions Notifications
Constantly on
Constantly on
Constantly on
Constantly on
Auto mode indicator
Manual Mode indicator
Timer Mode indicator
Empty Mode indicator
The device is in the Auto mode. The device is
available for cat to use and will sense the cat's
entering and leaving and operate automatically.
The device is in the Manual mode. The device is
available for a cat to use and needs to be
manually operated.
The device is in the Timer mode. The device is
available for a cat to use and will operated
automatically at the set time.
The device is in the Empty mode. The device is
operating and not available for a cat to use until
the emptying is complete.
Constantly on
Fast flashing
Slow flashing
During weighing, the device is suspended.
During radar protection, the device is suspended.
Full waste box.
Error indicator
p10

Indicator Lighting
conditions Notifications
Fast flashing
Slow flashing
Lights off
Constantly on
Flashing
Lights off
Constantly on
During anti-pinch protection
During anti-blocking protection
Not connected
Wi-Fi connection
Connecting
Not locked
Locked
Error indicator+
Panel lock
indicator
Wi-Fi indicator
Panel lock
indicator
+
After the machine is powered on, certain lights on the control panel will always be on. If all
lights are off, contact professional after-sales personnel for detection and treatment.
p11

【Wi-Fi Connection】
Activate/Zeroing Program(It must be operated under the condition that there is no cat litter in the ball cabin
and the waste box is empty).
*After the machine is powered on, the Start indicator flashes and the ball cabin does not rotate. Press and
hold the Mode button, then after hearing a beep twice, release the button to activate the zeroing
program(After the zeroing program is activated, the machine starts self-checking).
Download the CATLINK in the application market of your phone after the self-checking (lasting for 2
minutes) is ended.
Connect your phone to 2.4GHz WiFi, it does not currently support 5GHz and WiFi that requires special
certification.
Note: Name of WiFi cannot contain Chinese, spaces, or special characters, so as not to affect the WiFi
connection.
Open the CATLINK to register and log in. Find and click "Add Device" -> "AI Litter Box" and follow the instruc-
tions.
*Please authorize location information. Android need to turn on GPS.
Press and hold the Mode button and the Clean/Pause button at the same time until you hear the second
beeping sound. Then, the Wi-Fi connection indicator will blink, showing the device is ready for network
configuration.Use CATLINK to configure the network.
*Please keep the AI litter box as close as possible to the router.
p12
1
2
3
4
5

Operate according to the instructions on the CATLINK------------------------------------please refer to picture 6.1
"If the Wi-Fi connection indicator is constantly on, the device already has Wi-Fi connection and can be
controlled from the APP."
*If there is a network connection failure, please patiently re-operate it again, and pay attention to check
whether the WiFi password is correct. There may be a problem of poor network connection for some
Android users. If possible, please use other phones for network connection. After the network is successful-
ly connection, log in to the CATLINK on your original phone and you can use it normally."
"In the case of multiple confirmations that your operation is correct, but the network connection still fails,
please contact after-sales assistance in time."
After the connection is successful, the WiFi indicator of the device keeps constantly on.
-----------------------------------------------------------------------------------------------------------please refer to picture 7.1
After completing the above steps, the functions of CATLINK can be used normally.
p13
6
7
8

【Picture 6.1】 【Picture 7.1】
Manu Empty
Mode
p14

Short press the Mode button once until it
switches to the empty mode
The ball cabin starts to rotate clockwise when a
single short press of the Clean/Pause button
After the ball cabin's litter drop port faces
downwards and all the cat litter has fallen into the
waste box, short press the Clean/Pause button once
again to restore the ball cabin to the original position
After the ball cabin is reset, take out the waste
box, seal and discard the waste cat litter, put
on a new waste bag, and push the waste box
back to its original position
Add new cat litter to the ball cabin
1 2
3 4
1
2
3
4
5
p15
【Cat litter Replacement】

【Product Cleaning and Attentions】
Refer to the steps of 【Cat litter
Replacement】(Page 15) , and
power off after the cat litter is
empty
Take out the waste box and the cotton filter
(The cotton filter is recommended to expose
to the sunshine once a month and replace it
once every two months)
Parts can be washed directly (be sure to wipe
and dry thoroughly after washing)
Open the cover---------
1
4 5
2 3 Take out the ball cabin (pay
attention to remove the support-
ing rod of the rotating shaft on
the back of the ball cabin)
p16

Parts can be wiped with wet wipes ( contains
electronic parts and cannot be washed directly)
After cleaning up, install a new cotton filter
back to the waste box, and follow the reverse
steps to assemble the device properly
7
6
p17