CB2 bobbie User manual

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Made in India - r04 Page 1 of 2
bobbie BENCH / COFFEE TABLE
hardware
components
tools required
Thank you for purchasing the Bobbie Bench / Coffee
Table. This page lists all the contents included in the box.
Please take the time to identify the hardware as well as the
individual components to this product. As you unpack and
prepare for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are recommended to safely assemble this product.
Missing hardware?
Please call 800.606.6387 for replacements.
With the assistance of another adult,
carefully position tabletop upside onto a
clean, padded surface as shown. Match
each leg to corresponding letter label on
tabletop. Attach each leg to tabletop
with 3 bolts as shown. Secure, but do
not over tighten, the bolts using an allen
wrench. Position unit upright.
Assembly is now complete.
12 - bolts
4 - legs
(labeled A, B, C, D)
allen wrench (included)
1 - tabletop
NOTE: Do not over
tighten the bolts.
leg
tabletop

Made in India- r04 Page 2 of 2
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
bobbie
BENCH / COFFEE TABLE
cleaning and care
Do not leave spills unattended. Clean surfaces with a dry or damp soft
cloth. Do not use abrasive cleaners. It is recommended to use coasters
to protect surface from heat and water. For indoor use only.
method to adjust levelers on table
leg
leveler
NOTE: Please do the following if your table is
not level
With the assistance of another adult, adjust levelers of each
leg as necessary.