CB2 SIDECAR User manual

Made in Thailand - r05 Page 1 of 5
sidecar HIGH DINING TABLE
hardware
tools required
Thank you for purchasing the Sidecar High Dining
Table. This page lists all the contents included in the
box. Please take the time to identify the hardware as
well as the individual components to this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.
Note: 2 people are required to safely assemble this product.
It is recommended that a rubber mallet or other soft surfaced
tool be used for assembly.
Missing hardware? Please call
800.606.6387 for replacements.
allen wrench (included)
18 - cams
components
49 - wood
dowels
10 - cam
covers
18 - cam
screws
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
1 - tabletop 1 - left side panel 1 - right side panel 1 - leg frame
1 - back
panel (#1)
1 - partition (#2) 1 - top back
panel (#3)
1 - top crossbar2 - fixed back
shelves (#7)
1 - bottom front
panel (#6)
2 - fixed front
shelves (#8)
1 - bottom crossbar
1 - bottom back
panel (#5)
1 - top front
panel (#4)
8 - small
bolts
6 - medium
bolts
6 - levelers
8 - large
bolts
2 - brackets
4 - small
screws
6 - large
screws
phillips head screwdriver
rubber mallet
(We recommend the use of hand tools instead of power tools)
1 2 3
4
5 6
7 8

2
sidecar HIGH DINING TABLE
Made in Thailand - r05 Page 2 of 5
Insert 4 cam screws into right side panel as
shown.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
1
3 4
Insert 2 cam screws and 6 wood dowels into
partition (#2) as shown.
Insert 4 cam screws into back panel (#1) as
shown.
Insert 8 cam screws and 3 wood dowels into left
side panel as shown. Secure but do not over
tighten cam screws with a phillips head
screwdriver.
2
1
left side
panel
NOTE: Do not
over tighten the
cam screws
right side
panel
partition
back panel

6
sidecar HIGH DINING TABLE
Made in Thailand - r05 Page 3 of 5
A. Insert 2 cams and 6 wood dowels into
bottom back panel (#5) as shown. Make sure
arrows on each cam points toward nearest edge
with holes.
B. Insert 2 cams and 4 wood dowels into bottom
front panel (#6) as shown.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
5
7 8
A. Insert 3 cams and 6 wood dowels into fixed
back shelf (#7) as shown.
B. Insert 2 cams and 4 wood dowels into fixed
front shelf (#8) as shown.
A. Attach bottom front panel (#6) and top front
panel (#4) to partition (#2). Secure, but do not
over tighten each panel with 2 large screws, using
a screwdriver.
B. Attach 2 fixed front shelves (#8) to partition
(#2) with 1 large screw per shelf as shown.
A. Insert 2 cams and 6 wood dowels into top
back panel (#3) as shown. Make sure arrows on
each cam points toward nearest edge with holes.
B. Insert 2 cams and 4 wood dowels into top
front panel (#4) as shown.
5
6
7
8
6
2
8
8
NOTE: Make sure
arrows on each
cam points toward
nearest edge with
holes
top panel
(back)
NOTE: Do not
over tighten the
screws
A
B
top panel
(front)
bottom panel
(back)
A
B
bottom panel
(front)
fixed shelf
(back)
A
B
fixed shelf
(front)
top panel
(front)
bottom panel
(front)
fixed shelf
(front)
fixed shelf
(front)
A
B
3
4
4
Make sure the glossy side
of the top front panel (#4) is
facing down towards the
bottom front panel (#6) as shown.

sidecar HIGH DINING TABLE
Made in Thailand - r05 Page 4 of 5
With the assistance of another adult, carefully
place left side panel onto a clean, padded surface
as shown. Fit dowels of assembled unit into
corresponding holes of right side panel as shown.
Secure all cams.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
9
11 12
Fit cam screws of right side panel into
corresponding holes of assembled unit as shown.
Secure all cams.
A. With the assistance of another adult, carefully
position the assembled unit as shown. Fit cam
screws of back panel into corresponding holes of
assembled unit as shown. Secure all cams.
B. Cover all exposed cams with cam covers as
shown.
A. Fit dowels of bottom back panel (#5) and top
back panel (#3) into corresponding holes of
assembled unit.
B. Fit dowels of 2 fixed back shelves (#7) into
corresponding holes of assembled unit as shown.
Make sure the glossy edge of both panels are
facing up. Using a screwdriver, turn each cam
clockwise until it securely engages each cam
screw. 10
right side
panel
back
panel
VIEW FROM BELOW
bottom panel
(back)
A
top panel
(back)
fixed shelf
(back)
fixed shelf
(back)
B
left side
panel
top of unit
AB
5
7
7
3
Make sure the glossy side
of the top back panel (#3) is
facing down toward the bottom
back panel (#5) as shown, and
that the high gloss edge of
all panels are facing up.
NOTE: Make sure taller panels are
attached to the left side panel
using cam screws and dowels
positioned closer to the long edge
of the panel as shown.

sidecar HIGH DINING TABLE
Made in Thailand - r05 Page 5 of 5
A. Fit bottom/top crossbars onto corresponding
brackets of assembled unit as shown. Secure
each bracket with 2 small bolts, using an allen
wrench. Do not over tighten the bolts.
B. At the point, fit bottom/top crossbars onto
corresponding brackets of leg frame as shown.
Secure each bracket with 2 small bolts.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
13
15 16
Attach top panel to assembled unit with 8 large
bolts for leg/crossbar assembly and 6 medium
bolts for storage assembly as shown. Secure all
bolts with an allen wrench.
Insert 6 levelers to bottom of assembled unit as
shown. Turn clockwise to secure/adjust. With the
assistance of another adult, carefully position unit
upright.
Assembly is now complete.
With the assistance of another adult, carefully
position unit upright as shown. Attach 2 brackets
to left side panel of assembled unit with 2 small
screws per bracket as shown. Secure screws
with a screwdriver. 14
leveler
top panel
storage
assembly
leg/crossbar
assembly
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. It is recommended to use coasters to protect
surface from heat and water. When moving the assembled table to a new location, it is recommended that the table is picked
up on both sides by 2 adults, carried and gently placed down at the new location. Never drag the table as this could cause
damage.
NOTE: Make sure open
part of each bracket
is facing up as shown
A
leg frame
bottom
crossbar
top
crossbar
NOTE: Do not
over tighten the
bolts
B