cadet CABINET
Made in Thailand - r04 Page 4 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
9
12
A. Fit 2 hinges into corresponding holes of 2
doors as shown. Secure each hinge with 2 hinge
screws, using a screwdriver.
C. Adhere 2 bumpers to each door as shown.
B. Attach 1 pull to each door with 2 pull bolts,
using a screwdriver.
A) Attach hinges of each door onto the left or right
side panel of assembled unit. Secure each hinge
with 2 hinge screws.
B) Secure the set screws with a screwdriver as
shown. Refer to Hinge Adjustment diagram for
adjusting the alignment of the door hinges.
Assembly is now complete.
A. With assistance of another adult, position unit
upright. Insert 8 shelf pins at desired shelf
heights.
B. Place 2 adjustable shelves into assembled
unit. Make sure shelves are securely supported by
each shelf pin. 10
A
B
A
B
A
C
B
A
adjustable
shelf hinge
door
hinge adjustment
If the doors do not appear square or aligned, loosen or
tighten the appropriate screws on each case hinge as
illustrated.
2) Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw Aand secure screw Bwith
a 1/4 turn clockwise.
3) Height adjustment:
Loosen screw C, adjust
door height and re-
tighten screw C.
A
B
A
B
C
C
1
2
3
1) Side to side adjustment:
Loosen screw A, adjust gap
with screw Band re-tighten
screw A.
bumper
pull
NOTE: Doors can
be assembled to
left or right side
panel of assembled
unit
