CB2 CADET User manual

Made in Thailand - r05 Page 1 of 6
hardware
components
Thank you for purchasing the Cadet Wardrobe. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from
damage.
NOTE: 2 people are required to safely assemble this product.
tools required
cadet WARDROBE
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
19 - cam
screws
9 - large
cams
14 - pan
head
screws
32 - hinge
screws
11 - cam
covers
16 - flat
head
screws
phillips head screwdriver
2 - legs
Missing hardware? Please call 800.606.6387 for
replacements
1 - back panel
2 - side panels
(1 left, 1 right)
1 - top panel 1- bottom panel
1- partition 2 - adjustable
shelves
2 - doors
1- bottom shelf
38 - wood
dowels
(We recommend the use of hand tools instead of power tools)
2 - handles
2 - mounting
screws
1 - top
shelf
8 - handle
bolts
10 - small
cams
2 - plastic
anchors
8 - hinges
2 - shelf
supports
8 - bumpers 8 - shelf pins2 - wall straps

Made in Thailand - r05 Page 2 of 6
1 2
Insert 9 cam screws and 4 wood dowels into
left and right side panels. Secure, but do not
over tighten cam screws with a phillips head
screwdriver.
A) Insert 1 large cam and 4 wood dowels into
partition.
B) Insert 10 small cams and 14 wood dowels
into back panel.
cadet WARDROBE
right side
panel
left side
panel
back panel
NOTE: Make sure
the arrows on each
cam points toward
the nearest edge with
holes
34
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
A) Insert 4 large cams and 4 wood dowels into
bottom shelf. Make sure arrow on each cam
points toward the nearest edge with holes.
B) Insert 4 large cams, 4 wood dowels and 1
cam screw into top shelf.
bottom
shelf
top
shelf
partition
NOTE: Do not over
tighten the cams
screws
A
B
A
B
Fit dowels of partition into corresponding holes
of top shelf as shown. Using a screwdriver, turn
cam clockwise until it securely engages the cam
screw.
partition
top
shelf

Made in Thailand - r05 Page 3 of 6
5
7 8
cadet WARDROBE
6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Fit dowels of partition into corresponding holes
of bottom shelf as shown. Secure with 2 large
flat head screws using a screwdriver.
bottom
shelf
A
B
A) Fit dowels of back panel into corresponding
holes of left side panel as shown. Secure all
cams.
B) Fit dowels of assembled unit into
corresponding holes of left side panel as
shown. Secure all cams.
left side
panel
A
B
A) Fit dowels of assembled unit into
corresponding holes of right side panel. Secure
all cams.
B) At this point, cover all exposed cams with
cam covers.
right side
panel
cam
cover
Fit dowels of assembled unit into corresponding
holes of bottom panel. Secure with 7 large flat
head screws as shown.
bottom panel
shelf
assembly
back panel

Made in Thailand - r05 Page 4 of 6
9 10
11
cadet WARDROBE
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Fit dowels of assembled unit into corresponding
holes of top panel. Secure with 7 large flat head
screws using a screwdriver.
12
top panel
A) Attach 4 hinges to each door with 2 hinge
screws per hinge, using screwdriver.
B) Attach 1 handle to each door with 4 handle
bolts, using a screwdriver.
door
handle
hinge
A
B
A) Insert 2 wood dowels into each shelf support.
B) Fit dowels of each shelf support into
corresponding holes of each adjustable shelf.
Secure each shelf with 3 large pan head screws
using a screwdriver.
NOTE: Do not over
tighten the screws
adjustable
shelf
support
Attach 2 legs with 3 large pan head screws per
leg using a screwdriver.
leg
shelf
support
A
B

Made in Thailand - r05 Page 5 of 6
cadet WARDROBE
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
13 14
15
With the assistance of another adult, position unit
upright. Insert 8 shelf pins at desired shelf
heights.
B) Place 2 adjustable shelves into assembled
unit. Make sure shelves are securely supported
by shelf pins.
adjustable
shelf
shelf
pin
Attach 8 bumpers to shelves of assembled unit
as shown.
bumper
A) With assistance of another adult, attach hinges
of each door onto side panels of assembled unit as
shown. Secure each hinge with 2 hinge screws.
B) Secure the set screws with a screwdriver as
shown. Refer to Hinge Adjustment diagram for
adjusting the alignment of the door hinges.
Assembly is now complete.
B
hinge adjustment
If the doors do not appear square or aligned, loosen or
tighten the appropriate screws on each case hinge as
illustrated.
2) Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw Aand secure screw Bwith
a 1/4 turn clockwise.
3) Height adjustment:
Loosen screw C, adjust
door height and re-
tighten screw C.
A
B
A
B
C
C
1
2
3
1) Side to side adjustment:
Loosen screw A, adjust gap
with screw Band re-tighten
screw A.
A

cadet WARDROBE
Made in Thailand- r05 Page 6 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
optional wall mounting assembly
These instructions are for drywall mounting only. For safe installation
it is essential to use hardware appropriate for your wall type. Mount to
wood wall studs whenever possible. If you are unsure of what type of
fasteners to use, consult your local hardware store or a qualified profes-
sional. This product is only a deterrent, it is not a substitute for proper
adult supervision.
A. Attach 2 wall straps to back of unit with 1 mounting screw per strap
as shown. Secure, but do not over tighten with a phillips head screw-
driver.
B. With the assistance of another adult, place the unit in desired location
against the wall. Mark the location of the hole in the wall strap on the
wall. Move the unit out of the workspace.
C. Drill holes slightly smaller in diameter than the plastic anchor. Insert 1
plastic anchor into each hole until they are flush to the wall.
D. Place the unit back into position against the wall. Insert 1 pan head
screw through each wall strap and into the plastic anchor.
Wall mounting is now complete.
FRONT OF UNIT
BACK OF UNIT
wall
strap
mounting
screw
plastic
anchor
pan head
screw
WALL