CB2 odyssey User manual

Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
Thank you for purchasing the Odyssey Dining
Table. This page lists all the contents included in
the box. Please take the time to identify the
hardware as well as the individual components to
this product. As you unpack and prepare for
assembly, place the contents on a carpeted or
padded area to protect them from damage.
NOTE: 2 people are required to safely assemble this
product.
1
hardware
components
tools required
8 – small
washers
3 – large
washers
Missing hardware?
Please call 800.606.6387 for replacements.
allen wrench (included)
Page 1 of 2
1 – table
top
1 - leg
1 - base
1 - bracket
8 – long
bolts
7 – short
bolts
3 - spring
washers
Lay the tabletop face down onto a clean, padded
surface. Attach bracket to tabletop with 8 long
bolts and 8 small washers as shown. Tighten
bolts with an allen wrench.
long
bolt
small
washer
bracket tabletop
odyssey DINING TABLE
Made in China - r07

Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
odyssey DINING TABLE
Made in China - r07
Page 2 of 2
2
3
cleaning & care
Use a slightly damp cloth to wipe the table.
Do not use furniture polish as your table is finished
with a protective lacquer.
short bolt
spring washer
large washer
Attach base to the leg using 3 short bolts, 3 spring
washers, and 3 large washers as shown. Tighten
bolts with an allen wrench. Position unit upright.
The assembly is now complete.
Attach the leg to the bracket using 4 short bolts as
shown. Tighten bolts with an allen wrench.
leg
short bolt
bracket