CB2 WALNUT User manual

Made in Vietnam - r04 Page 1 of 4
walnut NIGHTSTAND
hardware
components
tools required
Thank you for purchasing the Walnut Nightstand.This
page lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components to this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Missing hardware?
Please call 800.606.6387 for replacements.
(We recommend the use of hand tools instead of power tools)
1 - top panel 1 - bottom panel 1 - back panel
2 - drawer sides
(1 right, 1 left)
1 - drawer bottom
1 - pull
2 - side panels
(1 right, 1 left)
1 - drawer front 1 - drawer back
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
phillips head screwdriver
8 - screws 2 - large
bolts
8 - small
bolts
8 - medium
bolts
8 - wood
dowels
8 - flat
washers
8 - spring
washers
4 - legs

walnut NIGHTSTAND
Made in Vietnam - r04 Page 2 of 4
12
A. Insert 4 wood dowels into top panel as
shown.
B. Insert 2 wood dowels into right and left side
panels as shown.
34
Fit dowels of side panels into top panel as
shown. Make sure grooves on each panel are
assembled on the same side. Using a phillips
head screwdriver, secure side panels to top
panel with 4 medium bolts, 4 spring washers
and 4 flat washers. Do not over tighten the bolts.
NOTE: Do not
over tighten
the bolts
Fit dowels of side panels into bottom panel as
shown. Secure bottom panel with 4 medium
bolts, 4 spring washers and 4 flat washers.
Insert back panel into grooves of side and top
panels as shown.
A
B
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

walnut NIGHTSTAND
Made in Vietnam - r04 Page 3 of 4
56
Attach 4 legs to bottom panel with 2 small bolts
per leg as shown. Secure bolts with a
screwdriver.
78
A. Attach left drawer side to drawer front with 2
screws as shown. Secure, but do not over
tighten, screws with a screwdriver.
B. Insert drawer bottom into grooves of drawer
front and side as shown.
Attach 1 pull to drawer front with 2 large bolts as
shown, using a screwdriver.
A. Attach left drawer side to drawer back with 2
screws as shown.
B. Attach right drawer side to drawer front and
back with 4 screws as shown.
A
B
B
NOTE: Do not
over tighten
the screws
A
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

walnut NIGHTSTAND
Made in Vietnam - r04 Page 4 of 4
9
With the assistance of another adult, position unit upright. Fit drawer glides of drawer into corresponding
drawer glides of assembly as shown. Firmly push drawer into assembly until the glides are securely engaged.
Assembly is now complete.
cleaning & care
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com