CB2 Beulah rocking chair User manual

1
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Made in Vietnam - r03 Page 1 of 2
beulah ROCKING CHAIR
components
hardware
tools required
Thank you for purchasing the Beulah rocking chair.
This page lists all the contents included in the box.
Please take the time to identify the hardware as well as
the individual components to this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.
Note: 2 people are recommended to safely assemble this
product.
Missing hardware?
Please call 800.606.6387 for replacements.
8 - long bolts
1 - seat frame1 - crossbar
2 - short bolts
allen wrench
(included)
1 - back frame
2 - side frames
(1 right, 1 left)
long
bolt
A. With the assistance of another adult, fit back
frame and seat frame into left side frame. Make
sure arrow labels on each component point up as
shown.
B. Using the allen wrench, secure left side frame
to seat and back frames with 4 long bolts.
NOTE: Make sure
arrow labels point up
A
B

2 3
Made in Vietnam - r03 Page 2 of 2
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Periodically, tighten bolts as necessary.
During normal weathering, wood may crack slightly due to changes in the moisture; this does not effect the structural integrity
of the furniture.
Store or keep covered during inclement weather and when not in use.
To preserve the original finish avoid leaving in direct sunlight for extended periods of time.
beulah ROCKING CHAIR
long
bolts
A. Fit back frame, seat frame and crossbar into
right side frame.
B. Secure right side frame to seat and back frames
with 4 long bolts.
C. Secure crossbar to side frame with 1 short bolt.
Assembly is now complete.
Attach crossbar to left side frame with 1 short
bolt, and secure with the allen wrench.
C
B
A
short
bolt