CB2 GRID User manual

mounting hardware
2 - small
screws
2 - large
screws
4 - wall
brackets
2 - wall
straps
2 - plastic
anchors
Made in China - r07 Page 1 of 5
grid MEDIA CONSOLE
hardware
components
tools required
Thank you for purchasing the Grid Media Console.This
page lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components to this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
NOTE: Due to size, 2 people are required to safely
assemble this product.
Missing hardware?
Please call 800.606.6387 for replacements.
(We recommend the use of hand tools instead of power tools)
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
phillips head screwdriver
14 - cam
screws
12 - wood
dowels
14 - cams 20 - small
screws
6 - large
screws
2 - small
bolts
2 - large
bolts
14 - cam
covers
8 - shelf
pins
2 - side panels
(1 left, 1 right)
1 - back
panel
1 - right
door
1 - left
door
1 - top
panel
1 - bottom
panel
1 - partition 2 - adjustable
shelves
5 - legs 2 - pulls

A. Insert 2 cam screws, 4wood dowels and 2
cams into left and right side panels as shown.
Secure, but do not over tighten, cam screws with a
phillips head screwdriver. Make sure arrows on
each cam point toward nearest edge with holes.
B. Insert 2 cams and 4 wood dowels into partition.
grid MEDIA CONSOLE
Made in China - r07 Page 2 of 5
1
34
A
2
Fit cam screws of left and right side panels into
corresponding holes of back panel as shown. Turn
each cam clockwise with a screwdriver until it
securely engages each cam screw.
Insert 10 cam screws into top panel as shown.
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
left and right
side panels
Insert 8 cams into back panel as shown.
partition
NOTE: Do not over
tighten the cam
screws
back
panel
B
top
panel
left side
panel
right side
panel
back panel
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

grid MEDIA CONSOLE
Made in China - r07 Page 3 of 5
5
67
With assistance of another adult, fit dowels of left
and right side panels into corresponding holes of
bottom panel, and secure with 4 large screws as
shown.
NOTE: Do not over
tighten the screws
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
A. Attach 5 legs to bottom panel as shown with 4
small screws per leg, using a screwdriver.
B. Fit dowels of partition into corresponding holes
of bottom panel and secure with 2 large screws
as shown, using a screwdriver.
partition
bottom
panel
A
B
left side
panel
right side
panel
A
B
leg
B
left door
right door
A
A
B
pull
NOTE: Do not over
tighten the bolts
A. Attach 1 pull to left door with 2 large bolts,
using a screwdriver.
B. Attach 1 pull to right door with 2 small bolts.

grid MEDIA CONSOLE
Made in China - r07 Page 4 of 5
89
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
A. Fit left door into front groove and right door
into back groove of bottom panel as shown.
B. Align grooves and holes in top panel with
corresponding doors and dowels of assembly.
Place into position as shown. Slide open doors
and secure all cams.
C. Cover all exposed cams with cam covers.
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer.
top
panel
left door
right door
A
B
C
A. Slide open left door and insert 4 shelf pins at
desired shelf heights.
B. Place 1 adjustable shelf into assembly. Make
sure each shelf is securely supported by shelf pins.
Close left door.
Repeat steps 9A-B for right door.
Assembly is now complete.
adjustable
shelf
A
A
B
left
door

grid MEDIACONSOLE
MadeinChina-r07 Page5of5
CustomerService800.606.6252|Latestinstructionsavailableatwww.cb2.com
Foraddedsafetyandstability,itisrecommendedthatthewallmountinghardware
beinstalled.Forsafemounting,itisessentialtousewallanchorsappropriateto
yourwalltype(i.e.plaster,drywall,concrete,etc.).Mounttowoodstudswhenever
possible.
A)Attach2mountingbracketstotopofunitusing1smallscrewperbracket.
B)Determinethefinallocationofunit.Markpositiononthewall,approximately2"
beloweachmountingbracketsmountedtothebackoftheunit.
C)Drillaholeinthewallstud.Ifthewallstudisnotavailable,drillaholeinthewall
thatisslightlysmallerindiameterthantheanchor.Gentlytaptheplasticanchor
untiltheflangeoftheanchorisflushwiththewall.
D)Attachthemountingbracketstothewallbyinserting1largescrewthrough
eachmountingbracketandintothewallanchorinthewall.
E)Positiontheunitsothemountingbracketonthebackedgeisallowedwiththe
wallbracket.
F)Laceoneendofeachwallstrapthroughcorrespondingbrackets,andintothe
otherendofthestrap.
G)Pullthestrapstightlyuntilsecure.
Wallmountingassemblyisnowcomplete.
NOTE:
Ifyouareunsureaboutyourwalltypeorwhatmountingmethodyoushould
use,consultaqualifiedprofessionaloryourlocalhardwarestore.
wall mounting assembly
A
C
D
small
screw
mounting
bracket
plastic
anchor
large
screw
wall
strap
mounting
bracket
WALL