Channel Vision ARIA IC624 User manual

Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for ten
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
[phone] toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
500-247 rev A
10
IC624
6.5” IN-CEILING SPEAKER
By
TM
0
1

2
Features:
h
h
h
h
h
h
h
6.5” High performance in-ceiling loudspeaker
High power handling capacity
Recommended power: 20W to 160W (peak)
15º Angled woofer
Gold speaker terminals
Pivoting tweeter technology with 1” voice coil.
Kevlar woofer with butyl rubber surround
Small perforated designer grill
h
Channel Vision’s ARIA™ in-ceiling custom
installation speakers feature high power handling capability
providing true stereo quality sound and not simply
background music. The 15º angled woofer and pivoting
tweeter can be aimed to any position to custom fit any room,
making these speakers perfect for home theater and whole-
house audio applications. High quality materials ensure long
life and great performance. Gold speaker wire terminals not
only provide better contact surface but also offer less
resistance to signal transfer for a clearer sound.
IC624 6.5”
Mounting screws (4)
Pivoting Tweeter
Angled Woofer
Model IC624
3
Installation:
O OT VER IGHTEN
h
h
h
h
h
h
Use the provided template to mark and cut a 8.25” hole in
drywall away from ceiling joists.
We recommend AWG 16 or larger.
For proper phasing, both speakers must be wired alike.
Connect red wires to red terminals on the speakers and
to red or plus terminals on the amplifier.
Install IC624 in the hole. Tighten the mounting screws.
The mounting “dogs ears” will rotate outward and grip the
drywall. the screws
Aim tweeter
To control the volume of the speaker locally, use an
impedance matching volume control, such as the
Channel Vision VC-302.
stranded wire
. A battery
operated drill on a “low clutch” setting is recommended.
D N O T
Specifications:
Frequency range:
Crossover:
Sensitivity:
Power Handling:
Drivers:
Magnet:
Impedance:
Finish:
Dimensions:
50Hz - 22kHz ± 6dB
12dB/octave (low pass)
12dB/octave (high pass)
89dB (1W/1m)
160 Watts peak
1- 1” Neodymium pivoting soft
dome tweeter
1- 15º Angled 6.5” Kevlar woofer
16-ounce ferrite magnet
8 ohms
ABS plastic
9” OD. 4 height
(from surface of wall board)
hole size: 8.25” diameter
”
Specifications subject to change without notice.