Channel Vision IW614 User manual

500-244 rev A
w w w . c h a n n e l v i s i o n . c o m
234 Fischer Avenue, Costa Mesa, California 92626 USA
[phone] [phone] [phone] fax
email: [email protected]
10
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for ten
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
[phone] toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
Channel Vision products are not intended for use in medical,
lifesaving, life sustaining or critical environment applications.
Channel Vision customers using or selling Channel Vision products
for use in such applications do so at their own risk and agree to fully
indemnify Channel Vision for any damages resulting from such
improper use or sale.
IW614
6.5” IN-Wall SPEAKER
0
1

2
Model IW614
Mounting screws (6)
Features:
h
h
h
h
h
h
6.5” High performance in-wall loudspeaker
High power handling capacity
Recommended power: 20W to 120W (peak)
Gold speaker terminals
Pivoting tweeter technology with 1” voice coil.
Kevlar woofer with butyl rubber surround and a 20 ounce
magnet
Small perforated designer grill
h
Channel Vision’s ARIA™ in- custom
installation speakers feature high power handling capability
providing true stereo quality sound and not simply
background music. The pivoting tweeters can be aimed to
any position to custom fit any room, making them perfect for
whole-house audio or home theater applications. High
quality materials ensure long life and great performance.
Gold speaker wire terminals not only provide better contact
surface but also offer less resistance to signal transfer for a
clearer sound.
IW614 6.5” wall
3
Specifications:
Frequency range:
Crossover:
Sensitivity:
Power Handling:
Drivers:
Magnet:
Impedance:
Finish:
Dimensions:
50Hz - 20kHz ± 3dB
12dB/octive (low pass)
12dB/octive (high pass)
90dB (1W/1m)
120 Watts peak
1- 1” Neodymium pivoting tweeter
1- 6.5” Kevlar woofer
20-ounce ferrite magnet
8 ohms
ABS plastic
hole size:
12.7”H x 9”W x 3.6”D
(Depth from surface of wall board)
10.75” x 7.75”
Specifications subject to change without notice.
Installation:
O OT VER IGHTEN
h
h
h
h
h
h
Use the provided template to mark and cut a hole in
drywall away in the center of the stud bay.
We recommend wiring with AWG 16 or larger, stranded
wire.
For proper phasing, both speakers must be wired alike.
Connect red wires to red terminals on the speakers and
to red or plus terminals on the amplifier.
Install I 14 in the hole. Tighten the mounting screws.
The mounting “dogs ears” will rotate outward and grip the
drywall. the screws
Aim tweeter
To control the volume of the speaker locally, use an
impedance matching volume control, such as the
Channel Vision VC-302.
W6
. A battery
operated drill on a “low clutch” setting is recommended.
D N O T