Channel Vision IC608 Aria User manual

Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for ten
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
[phone] toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
500-239 rev A2
10
IC608
6.5” IN-CEILING SPEAKER
By
9

2
Model IC608
Installation:
h
h
h
h
h
Use the provided template to mark and cut a 7.7” hole in
drywall away from ceiling joists.
We recommend wiring with AWG 16 or larger, stranded
wire.
For proper phasing, both voice coils must be wired alike.
Connect red wires to red terminals on speaker and to red
or plus terminals on amplifier.
Install IC608 in the hole. Tighten the mounting screws.
The mounting dog legs will rotate outward and grip the
drywall.
To control the volume of the speaker locally, use an
impedance matching volume control, such as the
Channel Vision VC-302.
Mounting screws (4)
Specifications:
Frequency range:
Power Handling:
Drivers:
Impedance:
Finish:
Dimensions:
60Hz - 20kHz ± 3dB
120 Watts
1- 0.5” High compliance polymer
tweeter
1- 6.5” Polypropylene woofer
8 ohms
ABS plastic
9” OD. 3.15
(Depth from surface of wall board)
”Deep
Specifications subject to change without notice.
3
Features:
Cost Effective
Easy to install
6.5” In-ceiling loudspeaker
Polypropylene woofer with butyl rubber surround
Small perforated designer grille
Recommended power: 120W (peak)
Rough-in bracket kit sold separately