Chauvet COLORado Ridge IP User manual

COLORado Ridge IP QRG
Page 8 of 8
HSV
Channel Function Value Percent/Setting
1
Hue
000 255 0~100%
2
Saturation
000 255 0~100%
3
V
alue
000 255 0~100%
Contact Us
World Headquarters
General Information CHAUVET®
5200 NW 108th Avenue
Sunrise, FL 33351
Voice: [phone]
Fax: [phone]
Toll free: [phone]
Technical Support Voice: [phone] (Press 4)
Fax: [phone]
World Wide Web www.chauvetlighting.com
COLORado Ridge IP QRG – Rev. 01c
© Copyright 2010 CHAUVET®
All rights reserved
Printed in the P. R. C.
Quick Reference Guide

COLORado Ridge IP QRG
Page 2 of 8
About this
Guide
The COLORado Ridge IP Quick Reference Guide (QRG) only contains the
product’s connection and mounting information as well as the menu options
and the DMX values.
Disclaimer
This Quick Reference Guide DOES NOT replace the product’s user
manual, which you can download from the CHAUVET® Web site
(www.chauvetlighting.com).
You must read ALL the disclaimers and safety notes in this document as
well as those in the product’s user manual before installing, operating,
or maintaining this product.
Safety Notes DO NOT open this fixture unless instructed. It contains no user
serviceable parts.
DO NOT look at the light source when this fixture is on.
DO NOT touch the fixture when it is operating because it may be hot.
DO NOT install or operate this fixture where there is less than 50 cm to
the nearest surface to allow adequate ventilation around it.
DO NOT leave any flammable material within 50 cm from this fixture
while operating or connected to the power outlet to minimize the risk of
fire.
DO NOT carry this fixture from the head; use the handles instead.
DO NOT install this product alone. This fixture weighs 53 lbs (24 kg).
Always ask for help when mounting this product to avoid personal
injuries or damage to the unit.
DO NOT mount this fixture overhead without using a safety cable.
DO NOT submerge this product (IP66). Regular outdoor operation is
fine.
DO NOT operate this fixture if you see damage on the housing, lenses,
or cables. In any of these cases, have the damaged parts replaced by an
authorized technician at once.
DO NOT connect this fixture to a dimmer or rheostat.
ONLY connect this fixture to a grounded and protected circuit.
What is
Included
One COLORado Ridge IP
One Edison to proprietary IP66 power input adapter
One male and female 3-pin DMX to proprietary IP66 adapter
One safety cable
Warranty Card
Quick Reference Guide
COLORado Ridge IP QRG
Page 7 of 8
TOUR
(Cont.)
Channel Function Value Percent/Setting
10 Auto Speed 000 255 Only when running an auto program
11 Dimmer Speed
000 009
010 029
030 069
070 129
130 189
190 255
Dimmer speed as per Control Panel
Linear dimmer
Non-linear dimmer 1 (fastest)
Non-linear dimmer 2
Non-linear dimmer 3
Non-linear dimmer 4 (slowest)
ARC1 Channel Function Value Percent/Setting
1 Red 000 255 0~100%
2 Green 000 255 0~100%
3 Blue 000 255 0~100%
AR1.D Channel Function Value Percent/Setting
1Dimmer 000 255 0~100%
2 Red 000 255 0~100%
3 Green 000 255 0~100%
4 Blue 000 255 0~100%
ARC3 Channel Function Value Percent/Setting
1 Red 000 255 0~100%
2 Green 000 255 0~100%
3 Blue 000 255 0~100%
4 White 000 255 0~100%
5 Amber 000 255 0~100%
AR3.D Channel Function Value Percent/Setting
1 Dimmer 000 255 0~100%
2 Red 000 255 0~100%
3 Green 000 255 0~100%
4 Blue 000 255 0~100%
5 White 000 255 0~100%
6 Amber 000 255 0~100%
AR3.S Channel Function Value Percent/Setting
1 Dimmer 000 255 0~100%
2 Red 000 255 0~100%
3 Green 000 255 0~100%
4 Blue 000 255 0~100%
5 White 000 255 0~100%
6 Amber 000 255 0~100%
7 Strobe 000 255 0~20 Hz

COLORado Ridge IP QRG
Page 6 of 8
DMX Values
TOUR
Channel Function Value Percent/Setting
1 Dimmer 000 255 0~100%
2 Module 1 Red 000 255 0~100%
Step Time Only when running custom programs
3 Module 1 Green 000 255 0~100%
Step Time Only when running custom programs
4 Module 1 Blue 000 255 0~100%
5 Module 1 White 000 255 0~100%
6 Module 1 Amber 000 255 0~100%
7 Color Macro +
White Balance
000 010
011 030
031 050
051 070
071 090
091 110
111 130
131 150
151 170
171 200
201 205
206 210
211 215
216 220
221 225
226 230
231 235
236 240
241 245
246 250
251 255
No function
R: 100% G: Up B: 0%
R: Down G: 100% B: 0%
R: 0% G: 100% B: Up
R: 0% G: Down B: 100%
R: Up G: 0% B: 100%
R: 100% G: 0% B: Down
R: 100% G: Up B: Up
R: Down G: Down B: 100%
R: 100% G: 100% B: 100% W: 100%
White 1: 3200 K
White 2: 3400 K
White 3: 4200 K
White 4: 4900 K
White 5: 5600 K
White 6: 5900 K
White 7: 6500 K
White 8: 7200 K
White 9: 8000 K
White 10: 8500 K
White 11: 10,000 K
8 Strobe 000 010
011 255
No Function
0~20 Hz
9 Auto + Custom
Programs
000 040
041 050
051 060
061 070
071 080
081 090
091 100
101 110
111 120
121 130
131 140
141 150
151 160
161 170
171 180
181 190
191 200
201 210
211 220
221 230
231 255
No function
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Custom 1
Custom 2
Custom 3
Custom 4
Custom 5
Custom 6
Custom 7
Custom 8
Custom 9
Custom 10
COLORado Ridge IP QRG
Page 3 of 8
Features
3, 4, 5, 6, 7, 10, or 11 channels RGBWA LED wash light with two
tiltable panels
Operating modes:
3-channel: HSV control
3-channel: RGB control
4-channel: RGB, dimmer
5-channel: RGBWA control
6-channel: RGBWA, dimmer
7-channel: RGBWA, dimmer, strobe
11-channel: Dimmer, RGBWA, color macro, strobe, auto/custom,
auto speed, dimmer curve
RGBWA static color mixing with or without DMX control
Color temperature presets (3,200~10,000 K)
Built-in (auto) programs
Customizable (custom) programs
Recall auto/custom programs via DMX
Five distinct dimming curves
Ingress Protection: IP66
3-pin DMX input and output connectors
LED display with password protection
Die-cast aluminum, powder coated housing
Color calibration
Omega bracket mounting system
Options
15optical system CLENS1590
30º optical system CLENS3090
16.4 ft (5 m) IP66 power extension cable IP5POWER
16.4 ft (5 m) IP66 signal extension cable IP5SIG

COLORado Ridge IP QRG
Page 4 of 8
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Mounting
Before mounting this product, read the safety notes at the beginning of this
guide and on page 2 of the product’s user manual. Then, follow the
mounting procedure indicated in the Setup chapter of the user manual.
Product
Mounting
Diagram
Control Panel
Description
Button Function
<MENU>
Exits from the current menu or function
<SET>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases
the numeric value when in a function
Programming
For details on how to program this product, please refer to the product’s
user manual.
Password
After being prompted to enter the password, press:
<UP> , <DOWN> , <UP> , <DOWN> , and <ENTER>
OverheadMounting
FloorMounting
CClamps
(notincluded)
Safetycable
(included)
COLORado Ridge IP QRG
Page 5 of 8
Menu Options
Main Level 2nd Level 3rd Level Description
STAT
RE
D
000~255
(0~100%)
User can combine Red, Green, Blue, White,
and Amber to generate a custom color.
GREEN
BLUE
WHITE
AMBER
S
TRB 00~20 (0~20 Hz) Select a strobe frequency
AUTO AUTO 1~10 Choose from 10 automatic programs
CUSTOM Choose from 10 customizable programs
A
DDR 001~512 N/A Sets the DMX starting address
RUN DMX/SLAV N/A Selects the DMX or SLAVE mode
PERS
TOUR
N/A
11-channel
ARC 1 3-channel
AR1.D 4-channel
ARC.3 5-channel
AR3.D 6-channel
AR3.S 7-channel
HSV 3-channel
SET
UPLD PSWD SEND END Uploads custom programs
REST PSWD RST END Resets the fixture to the factory settings
DIM OFF Faders act linearly
DIM1~4 DIM1 (fastest)~DIM4 (slowest)
COLOR
OFF No color compensation
RGBW White is defined by CAL2 > RGB.W
UC Color compensation to match older fixtures
EDIT PR
(1~10)
SC
(01~30)
RED
000~255 User can combine Red, Green, Blue, White,
and Amber to generate a custom color.
GREEN
BLUE
WHITE
AMBER
STRB 00~20 Selects the strobe frequency (0~20 Hz)
TIME 000~255 Defines the step duration (0~100%)
FADE Defines the fade duration (0~100%)
CAL1 WH (1~11)
RED
000~255
User can combine Red, Green, Blue, White,
and Amber to generate whites with various
temperatures (TOUR > Channel 7).
GREEN
BLUE
WHITE
AMBER
CAL2 RGB.W
RED
000~255
User can combine Red, Green, and Blue to
generate a balanced white (SET > COLOR
>RGBW))
GREEN
BLUE
WDMX ACTI ON/OFF Activates W-DMX connection
REST Resets W-DMX connection
KEY ON/OFF N/A Turns the password on or off