Chauvet Hurricane haze User manual

3000 N 29th Ct, Hollywood, FL 33020 U.S.A.
[phone] –[phone]
FAX [phone]
www.chauvetlighting.com
User Manual
Snapshot
Use on Dimmer
Outdoor Use
Sound Activated
DMX
Master / Slave
115 V / 230 V Switch
Replaceable Fuse
User Serviceable
Duty Cycle

Hurricane™ Haze User Manual 2 4/20/2010 4:41 PM
TABLE OF CONTENTS
1. BEFORE YOU BEGIN................................................................................................................................................... 3
WHAT IS INCLUDED ................................................................................................................................................................................ 3
UNPACKING INSTRUCTIONS .................................................................................................................................................................... 3
AC POWER........................................................................................................................................................................................... 3
SAFETY INSTRUCTIONS .......................................................................................................................................................................... 4
2. INTRODUCTION ........................................................................................................................................................... 4
FEATURES ............................................................................................................................................................................................ 4
DMX CHANNEL SUMMARY ..................................................................................................................................................................... 4
PRODUCT OVERVIEW............................................................................................................................................................................. 5
3. SETUP .......................................................................................................................................................................... 6
FUSE REPLACEMENT ............................................................................................................................................................................. 6
FIXTURE LINKING................................................................................................................................................................................... 9
DATA CABLING...................................................................................................................................................................................... 9
DMX Data Cable....................................................................................................................................................... 9
Cable Connectors................................................................................................................................................... 10
3-Pin to 5-Pin Conversion Chart.............................................................................................................................. 10
SETTING UP A DMX SERIAL DATA LINK ................................................................................................................................................. 10
MOUNTING............................................................................................................................................................................................ 6
Orientation................................................................................................................................................................ 6
Rigging ..................................................................................................................................................................... 6
4. OPERATING INSTRUCTIONS...................................................................................................................................... 6
DMX MODE.......................................................................................................................................................................................... 6
DMX CHANNEL VALUES ........................................................................................................................................................................ 6
WIRED REMOTE (HH1) (INCLUDED)........................................................................................................................................................ 7
CONTACT US........................................................................................................................................................................................ 8
5. APPENDIX.................................................................................................................................................................... 8
DMX PRIMER ....................................................................................................................................................................................... 8
SETTING THE DMX STARTING ADDRESS ................................................................................................................................................. 9
DMX Quick Reference Chart................................................................................................................................... 12
GENERAL TROUBLESHOOTING .............................................................................................................................................................. 13
TECHNICAL SUPPORT .......................................................................................................................................................................... 13
RETURNS PROCEDURE ........................................................................................................................................................................ 15
CLAIMS .............................................................................................................................................................................................. 15
TECHNICAL SPECIFICATIONS ................................................................................................................................................................ 16

Hurricane™ Haze User Manual 3 4/20/2010 4:41 PM
1. BEFORE YOU BEGIN
What is included
1 x Hurricane™Haze
1 x Wired Remote (HH1)
1 x Power Cord
1 x Warranty Card
1 x User Manual
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that
all parts are present, and have been received in good condition. Notify the shipper immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture
must be returned to the factory, it is important that the fixture be returned in the original factory box
and packing.
AC Power
To determine the power requirements for a particular fixture, see the label affixed to the back plate of
the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating is its average
current draw under normal conditions. All fixtures must be powered directly off a switched circuit and
cannot be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0% to 100% switch. Before applying power to a fixture, check that the
source voltage matches the fixture’s requirement. Check the fixture or device carefully to make sure
that if a voltage selection switch exists that it is set to the correct line voltage you will use.
Warning! Verify that the voltage rating on your unit matches the line voltage applied. Damage
to your fixture may result if the line voltage applied does not match the voltage
indicated on the rating. All fixtures must be connected to circuits with a suitable
Earth Ground.

Hurricane™ Haze User Manual 4 4/20/2010 4:41 PM
Safety Instructions
Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that
they also receive this instruction booklet.
Always make sure that you are connecting to the proper voltage, and that the line voltage you are
connecting to is not higher than that stated on the decal or rear panel of the fixture.
This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to
rain or moisture.
Make sure there are no flammable materials close to the unit while operating.
The unit must be installed in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces. Be sure that no ventilation slots are blocked.
Always disconnect from power source before servicing or replacing lamp or fuse and be sure to
replace with same lamp source.
Secure fixture to fastening device using a safety chain.
Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at temperatures higher
than this.
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the
unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please
contact the nearest authorized technical assistance center. Always use the same type spare parts.
Never connect the device to a dimmer pack.
Make sure the power cord is never crimped or damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Caution! There are no user serviceable parts inside the unit. Do not open the housing or
attempt any repairs yourself. In the unlikely event your unit may require service,
please contact CHAUVET at: 954-929-1115.
2. INTRODUCTION
Features
2-channel DMX-512 hazer
Adjustable haze output via DMX, wired remote or control panel on rear
Adjustable fan speed via DMX, wired remote or control panel on rear
Additional Features
True continuous output
Variable output angle
Low fluid indicator
Wired multi-function remote included
Water-based hazer
DMX Channel Summary
CHANNEL
FUNCTION
1
Haze output
2
Blower/fan speed
Please read these instructions carefully, which includes important
information about the installation, usage and maintenance of this
product.

Hurricane™ Haze User Manual 5 4/20/2010 4:41 PM
Product Overview
Remote
control
DIP switches
DMX
LED
indicator
“Heating”
LED
indicator
Power
switch
No fluid LED
indicator
DMX out
DMX in
Fuse holder
Power
input
Back door
handle for fluid
container
& remote control
storage

Hurricane™ Haze User Manual 6 4/20/2010 4:41 PM
Hanging Clamp
Note!
Clamp is sold separately.
The fuse is located
inside this
compartment.
Remove using a flat
head screwdriver.
3. SETUP
Fuse Replacement
With a flat head screwdriver wedge the fuse
holder out of its housing. Remove the damaged
fuse from its holder and replace with exact
same type fuse. Insert the fuse holder back in
its place and reconnect power.
Mounting
Orientation
This fixture may be mounted in a hanging or sitting position, provided there is adequate room for
ventilation.
Rigging
It is important never to obstruct the vents pathway. Mount the fixture using,
a suitable “C” or “O” type clamp.
When selecting installation location, take into consideration fluid
replacement, access, and routine maintenance.
Safety cables must always be used.
Never mount in places where the fixture will be exposed to rain, high
humidity, extreme temperature changes or restricted ventilation.
4. OPERATING INSTRUCTIONS
DMX Mode
This mode allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with
DMX, please read the “DMX Primer section” in the Appendix of this manual.
1) This fixture will automatically switch to DMX mode, once a DMX controller has been plugged into
the 3-pin DMX input.
2) Use DIP switches 1~9 to set the DMX address.
DMX Channel Values
CHANNEL
VALUE
FUNCTION
1
000 255
Haze output
0% 100%
2
000 255
Blower/fan speed
0% 100%
Disconnect the power cord before replacing a fuse and always
replace with the same type fuse.

Hurricane™ Haze User Manual 7 4/20/2010 4:41 PM
Wired Remote (HH1) (Included)
This is the controller that comes with the Hurricane™Haze. There are 3 functions of this remote. Please see
the below instructions for details on each of these operations.
Timer Function
1) Plug in the haze machine to power and turn the power switch to the fixture on.
2) Plug in the timer remote to the Manual Controller socket on the rear of the haze machine.
3) Press the <TIMER ON/OFF> button on the timer remote. The LED above the button should light, indicating
activation of function.
4) You may now set the INTERVAL & DURATION adjustment knobs to the desired position.
Note: The< INTERVAL> is the time in between bursts of haze.
Note: The <DURATION> is the time that the haze machine will run during the burst.
Manual Function
1. Press the <MANUAL> button, and the haze machine will output haze for as long as you hold down the
button, at full blower speed and 100% output.
Continuous Function
1. Press the <CONTINUOUS> button.
2. Adjust the <OUTPUT ADJUSTMENT KNOB> to desired position.
Note: The <INTERVAL> and <DURATION ADJUSTMENT KNOBS> will have no effect while the
CONTINUOUS function is activated.
Note: The blower fan remains at full and the <OUTPUT ADJUSTMENT KNOB> controls the haze
output.
Continuous
LED
Duration
adjustment
Interval
adjustment
Output
adjustment
Timer active
LED
Timer on/off
button
Manual/ready
LED
Manual
button
Continuous
button

Hurricane™ Haze User Manual 8 4/20/2010 4:41 PM
Contact Us
World Wide
General Information CHAUVET®
3000 North 29th Court
Hollywood, FL 33020
voice: 954.929.1115
fax:[phone]
toll free: 800.762.1084
Technical Support CHAUVET®
3000 North 29th Court
Hollywood, FL 33020
voice: 954.929.1115 (Press 4)
fax:[phone] (Attention: Service)
World Wide Web www.chauvetlighting.com
5. APPENDIX
DMX Primer
There are 512 channels in a DMX-512 connection. Channels may be assigned in any manner. A
fixture capable of receiving DMX 512 will require one or a number of sequential channels. The user
must assign a starting address on the fixture that indicates the first channel reserved in the controller.
There are many different types of DMX controllable fixtures and they all may vary in the total number
of channels required. Choosing a start address should be planned in advance. Channels should
never overlap. If they do, this will result in erratic operation of the fixtures whose starting address is
set incorrectly. You can however, control multiple fixtures of the same type using the same starting
address as long as the intended result is that of unison movement or operation. In other words, the
fixtures will be slaved together and all respond exactly the same.
DMX fixtures are designed to receive data through a serial Daisy Chain. A Daisy Chain connection is
where the DATA OUT of one fixture connects to the DATA IN of the next fixture. The order in which
the fixtures are connected is not important and has no effect on how a controller communicates to
each fixture. Use an order that provides for the easiest and most direct cabling. Connect fixtures
using shielded two conductor twisted pair cable with three pin XLR male to female connectors. The
shield connection is pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+).

Hurricane™ Haze User Manual 9 4/20/2010 4:41 PM
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller
or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The
combined number of channels required by all the fixtures on a serial data link determines the number
of fixtures the data link can support.
Important: Fixtures on a serial data link must be daisy chained in one single line. To
comply with the EIA-485 standard no more than 32 fixtures should be
connected on one data link. Connecting more than 32 fixtures on one serial
data link without the use of a DMX optically-isolated splitter may result in
deterioration of the digital DMX signal.
Maximum recommended serial data link distance: 500 m (1640 ft)
Maximum recommended number of fixtures on a serial data link: 32
Data Cabling
To link fixtures together you must obtain data cables. You can purchase CHAUVET certified DMX
cables directly from a dealer/distributor or construct your own cable. If you choose to create your own
cable please use data-grade cables that can carry a high quality signal and are less prone to
electromagnetic interference.
DMX Data Cable
Use a Belden© 9841 or equivalent cable which meets the specifications for EIA RS-485 applications.
Standard microphone cables cannot transmit DMX data reliably over long distances. The cable will
have the following characteristics:
Type: shielded, 2-conductor twisted pair
Maximum capacitance between conductors: 30 pF/ft
Maximum capacitance between conductor and shield: 55 pF/ft
Maximum resistance: 20 ohms/1000 ft
Nominal impedance: 100 –140 ohms

Hurricane™ Haze User Manual 10 4/20/2010 4:41 PM
This drawing provides
a general illustration of
the DMX Input/Output
panel of a lighting
fixture.
Universal DMX Controller
Continue the link
Cable Connectors
Cabling must have a male XLR connector on one end and a female XLR connector on the other end.
CAUTION Do not allow contact between the common and the fixture’s chassis ground.
Grounding the common can cause a ground loop, and your fixture may
perform erratically. Test cables with an ohmmeter to verify correct polarity and
to make sure the pins are not grounded or shorted to the shield or each other.
3-Pin to 5-Pin Conversion Chart
Note! If you use a controller with a 5-pin DMX output connector, you will need to use
a 5-pin to 3-pin adapter.
The chart below details a proper cable conversion:
3PIN TO 5PIN CONVERSION CHART
Conductor
3 Pin Female (Output)
5 Pin Male (Input)
Ground/Shield
Pin 1
Pin 1
Data ( - ) signal
Pin 2
Pin 2
Data ( + ) signal
Pin 3
Pin 3
Not used
Pin 4
Not used
Pin 5
Setting up a DMX Serial Data Link
1. Connect the (male) 3-pin connector side of
the DMX cable to the output (female) 3-pin
connector of the controller.
2. Connect the end of the cable coming from
the controller which will have a (female)
3-pin connector to the input connector of
the next fixture consisting of a (male) 3-pin
connector.
3. Then, proceed to connect from the output
as stated above to the input of the following
fixture and so on.
Setting the DMX Starting Address
This DMX mode enables the use of a universal DMX
controller device. Each fixture requires a "start address"
from 1 to 512. A fixture requiring one or more channels
COMMON
DMX +
DMX -
INPUT
OUTPUT
1
3
2
1
3
2
1
3
2
Resistance 120
ohm 1/4w between
pin 2 (DMX -) and
pin 3 (DMX +) on
the output of the
last fixture.
DMX connector configuration
To avoid signal transmission
problems and interference, it is
always advisable to connect a
DMX signal terminator.

Hurricane™ Haze User Manual 11 4/20/2010 4:41 PM
for control begins to read the data on the channel indicated by the start address. For example, a fixture that
uses 6 DMX channels and was addressed to start on DMX channel 100, would read data from channels: 100,
101, 102, 103, 104, and 105. Choose start addresses so that the channels used do not overlap, and note the
start address selected for future reference.
If this is your first time addressing a fixture using the DMX-512 control protocol, we suggest jumping to the
Appendix Section and reading the heading “DMX Primer section”. It contains very useful information that will
help you understand its use.
Set the start address using the group of DIP switches located usually on bottom of the fixture. Each DIP switch
has an associated value. Adding the value of each switch in the ON position will provide the start address.
Figuring out which switches to toggle ON given a specific start address can be accomplished by determining
which switch values will add up to the address value, and turning these switches on. Do so by doing the
following:
1) Determine the largest value switch that is less than the start address. Turn this switch on.
2) Subtract the value of the DIP switch you just turned on from the starting address number.
3) Determine the largest value switch that is less than the remainder from the previous subtraction. Turn this
switch on.
4) Subtract the value of the switch you just turned on from the remainder of the previous subtraction.
5) Repeat steps three and four until you have a remainder of zero.
EXAMPLE STARTING ADDRESS
Address 10
Switch # 4 = 8
Switch # 2 = 2
Total = 10
Address 24
Switch # 5 = 16
Switch # 4 = 8
Switch # 2 = 2
Total = 26
Resolving address
using simple math.
Address 233
233 –(128) = 105, Turn ON DIP # 8
105 –(64) = 41, Turn ON DIP # 7
41 –(32) = 9, Turn ON DIP # 6
9 –(8) = 1, Turn ON DIP # 4
1 –(1) = 0, Turn ON DIP # 1
DIP SWITCH
(DMX VALUE)
1
2
3
4
5
6
7
8
9
1
2
4
8
16
32
64
128
256
13456789
ON
OFF
1 2 4 8
16 32 64
128 256
13456789
ON
OFF
1 2 4 8
16 32 64
128 256
13456789
ON
OFF
1 2 4 8
16 32 64
128 256
13456789
ON
OFF
1 2 4 8
16 32 64
128 256
13456789
ON
OFF
1 2 4 8
16 32 64
128 256
12222223456789
ON
OFF
1 2 4 8
16 32 64
128 256
123456789
ON
OFF
1 2 4 8
16 32 64
128 256
123456789
ON
OFF
1 2 4 8
16 32 64
128 256
123456789
ON
OFF
1 2 4 8
16 32 64
128 256
123456789
ON
OFF
1 2 4 8
16 32 64
128 256
123456789
ON
OFF
1 2 4 8
16 32 64
128 256
123456789
ON
OFF
1 2 4 8
16 32 64
128 256

Hurricane™ Haze User Manual 12 4/20/2010 4:41 PM
DMX Quick Reference Chart
DMX Address Quick Reference Chart
DIP Switch Position
DMX DIP
SWITCH SET
#9
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0=OFF
#8
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
1=ON
#7
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
X=OFF or ON
#6
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
#1
#2
#3
#4
#5
0
0
0
0
0
32
64
96
128
160
192
224
256
288
320
352
384
416
448
480
1
0
0
0
0
1
33
65
97
129
161
193
225
257
289
321
353
385
417
449
481
0
1
0
0
0
2
34
66
98
130
162
194
226
258
290
322
354
386
418
450
482
1
1
0
0
0
3
35
67
99
131
163
195
227
259
291
323
355
387
419
451
483
0
0
1
0
0
4
36
68
100
132
164
196
228
260
292
324
356
388
420
452
484
1
0
1
0
0
5
37
69
101
133
165
197
229
261
293
325
357
389
421
453
485
0
1
1
0
0
6
38
70
102
134
166
198
230
262
294
326
358
390
422
454
486
1
1
1
0
0
7
39
71
103
135
167
199
231
263
295
327
359
391
423
455
487
0
0
0
1
0
8
40
72
104
136
168
200
232
264
296
328
360
392
424
456
488
1
0
0
1
0
9
41
73
105
137
169
201
233
265
297
329
361
393
425
457
489
0
1
0
1
0
10
42
74
106
138
170
202
234
266
298
330
362
394
426
458
490
1
1
0
1
0
11
43
75
107
139
171
203
235
267
299
331
363
395
427
459
491
0
0
1
1
0
12
44
76
108
140
172
204
236
268
300
332
364
396
428
460
492
1
0
1
1
0
13
45
77
109
141
173
205
237
269
301
333
365
397
429
461
493
0
1
1
1
0
14
46
78
110
142
174
206
238
270
302
334
366
398
430
462
494
1
1
1
1
0
15
47
79
111
143
175
207
239
271
303
335
367
399
431
463
495
0
0
0
0
1
16
48
80
112
144
176
208
240
272
304
336
368
400
432
464
496
1
0
0
0
1
17
49
81
113
145
177
209
241
273
305
337
369
401
433
465
497
0
1
0
0
1
18
50
82
114
146
178
210
242
274
306
338
370
402
434
466
498
1
1
0
0
1
19
51
83
115
147
179
211
243
275
307
339
371
403
435
467
499
0
0
1
0
1
20
52
84
116
148
180
212
244
276
308
340
372
404
436
468
500
1
0
1
0
1
21
53
85
117
149
181
213
245
277
309
341
373
405
437
469
501
0
1
1
0
1
22
54
86
118
150
182
214
246
278
310
342
374
406
438
470
502
1
1
1
0
1
23
55
87
119
151
183
215
247
279
311
343
375
407
439
471
503
0
0
0
1
1
24
56
88
120
152
184
216
248
280
312
344
376
408
440
472
504
1
0
0
1
1
25
57
89
121
153
185
217
249
281
313
345
377
409
441
473
505
0
1
0
1
1
26
58
90
122
154
186
218
250
282
314
346
378
410
442
474
506
1
1
0
1
1
27
59
91
123
155
187
219
251
283
315
347
379
411
443
475
507
0
0
1
1
1
28
60
92
124
156
188
220
252
284
316
348
380
412
444
476
508
1
0
1
1
1
29
61
93
125
157
189
221
253
285
317
349
381
413
445
477
509
0
1
1
1
1
30
62
94
126
158
190
222
254
286
318
350
382
414
446
478
510
1
1
1
1
1
31
63
95
127
159
191
223
255
287
319
351
383
415
447
479
511
DIP Switch Position DMX Address

Hurricane™ Haze User Manual 13 4/20/2010 4:41 PM
General Troubleshooting
Symptom
Solution(s)
Auto shut off
Check thermal switch reset
Breaker/Fuse keeps
blowing
Check total load placed on device
Device has no power
Check for power on Mains.
Check device’s fuse. (internal and/or external)
Fixture is not responding
Check DMX Dip switch settings for correct addressing
Check DMX cables
Check polarity switch settings
Fixture is on but there is
no movement to the audio
Make sure you have the correct audio mode on the control switches. If
audio provided via ¼” jack, make sure a live audio signal exists
Adjust sound sensitivity knob
Loss of signal
Use only DMX cables
Install terminator
Note: Keep DMX cables separated from power cables or black lights.
Remote does not work
Make sure connector is firmly connected to device
Stand alone mode
All Chauvet lighting fixtures featuring stand-alone functions do not
require additional settings, simply power the fixture and it will
automatically enter into this mode
If you still have a problem after trying the above solutions, please contact CHAUVET®
Technical Support at the location below.
Technical Support
Address: Service Dept.
3000 N 29th Ct, Hollywood, FL 33020 (U.S.A.)
Support (Email): [e-mail]
Telephone: [phone] - (Press 4)
Fax: [phone] - (Attention: Service)
Website: http://www.chauvetlighting.com

Hurricane™ Haze User Manual 14 4/20/2010 4:41 PM
WARNING!
Note: All haze machines are prone to clogging due to the thick consistency of haze fluid
and the high temperature at which it vaporizes. However, a properly maintained
haze machine should provide years of reliable use. Cleaning your haze machine
regularly will help reduce costly replacement and repair charges.
Maintenance
Do not allow the haze machine to become contaminated. After every 40 hours of continuous operation, it is
recommended to run a cleaning solution composed of 80% distilled water and 20% distilled vinegar through
the system to prevent the accumulation of particulate matter in the heating element.
The recommended cleaning regimen is as follows:
1. Empty all haze fluid from the machine. Add cleaning solution to tank. Plug unit in and begin warm
up.
2. Run the unit in a well-ventilated area until the tank is almost empty. Do not allow the pump to run
dry!
3. Cleaning is now complete. Refill with haze fluid. Run the machine briefly to clear any cleaning
solution from the pump and heater.
Caution! Do not operate the machine without fluid at any time!
Storage
1. When storing run distilled water (not tap water) through the system as described in the cleaning
regiment above. This will help avoid any particles condensing inside the pump or heater.
2. It is strongly recommended to test-run the machine on a monthly basis in order to achieve its best
hazing condition.
Caution:
1. Never place the haze/hazer machine on any flammable material (i.e. carpet, fabric etc.) during
operation. All haze/hazer machines should always be on a non-flammable surface, such as
concrete or tile.
2. Depending on the amount of haze/haze generated, all haze machines may set off smoke detectors.

Hurricane™ Haze User Manual 15 4/20/2010 4:41 PM
Returns Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Merchandise Authorization Number (RMA #).
Products returned without an RMA # will be refused. Call CHAUVET® and request RMA # prior to
shipping the fixture. Be prepared to provide the model number, serial number and a brief description
of the cause for the return. Be sure to properly pack fixture, any shipping damage resulting from
inadequate packaging is the customer’s responsibility. CHAUVET® reserves the right to use its own
discretion to repair or replace product(s). As a suggestion, proper UPS packing or double-boxing is
always a safe method to use.
Note: If you are given an RMA #, please include the following information on a piece of
paper inside the box:
1) Your name
2) Your address
3) Your phone number
4) The RMA #
5) A brief description of the symptoms
Claims
Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify and
submit claims with the shipper in the event that a fixture is damaged due to shipping. Any other claim
for items such as missing component/part, damage not related to shipping, and concealed damage,
must be made within seven (7) days of receiving merchandise.

Hurricane™ Haze User Manual 16 4/20/2010 4:41 PM
Technical Specifications
WEIGHT & DIMENSIONS
Length........................................................................................................................11.1 in (284 mm)
Width..........................................................................................................................11.6 in (294 mm)
Height ...........................................................................................................................14 in (360 mm)
Weight............................................................................................................................ 17 lbs (7.6 kg)
POWER
Voltage-specific power input............................................................115 VAC 60 Hz or 230 VAC 50 Hz
Power Consumption..................................................................................510 W (4.2 A) max @ 120 V
Inrush Current............................................................................................... 45.6 W (1.33 A) @ 120 V
Power Factor...................................................................................................................0.99 @ 120 V
OUTPUT/FLUID CONSUMPTION
Output.................................................................................................................................12,000 cfm
Fluid consumption................................................................................................................. 21 ml/min
FUSE
115 VAC ..............................................................................................................5 A 250 V (fast blow)
230 VAC ..............................................................................................................3 A 250 V (fast blow)
COMPATIBLE FLUID
Haze Fluid....................................................................................................................... Water-based
THERMAL
Maximum ambient temperature......................................................................................104° F (40° C)
CONTROL & PROGRAMMING
Data input ............................................................................................. locking 3-pin XLR male socket
Data output ........................................................................................ locking 3-pin XLR female socket
Data pin configuration ............................................................................pin 1 shield, pin 2 (-), pin 3 (+)
Protocols.....................................................................................................................DMX-512 USITT
DMX Channels....................................................................................................................................2
ORDERING INFORMATION
Hurricane™Haze................................................................................................... HURRICANEHAZE
Haze Fluid (gallon).........................................................................................................................FJU
Haze Fluid (quart) ..........................................................................................................................FJQ
Platinum Fluid............................................................................................................................... HDF
WARRANTY INFORMATION
Warranty...........................................................................................................1-year limited warranty