Chauvet SlimPAR PRO VW User manual

User Manual

TABLE OF CONTENTS
1. BEFORE YOU BEGIN ............................................................................................................................................................3
WHAT IS INCLUDED ......................................................................................................................................................................3
UNPACKING INSTRUCTIONS ...........................................................................................................................................................3
MANUAL CONVENTIONS ................................................................................................................................................................3
ICONS ........................................................................................................................................................................................3
SAFETY INSTRUCTIONS .................................................................................................................................................................4
2. INTRODUCTION.....................................................................................................................................................................5
PRODUCT OVERVIEW ...................................................................................................................................................................6
3. SETUP.....................................................................................................................................................................................7
AC POWER.................................................................................................................................................................................7
Power Linking .............................................................................................................................................................................................. 7
MOUNTING .................................................................................................................................................................................8
Orientation ................................................................................................................................................................................................... 8
Rigging ........................................................................................................................................................................................................ 8
LENS ASSEMBLY REPLACEMENT ....................................................................................................................................................9
4. OPERATING INSTRUCTIONS ............................................................................................................................................10
CONFIGURING THE STARTING ADDRESS ........................................................................................................................................10
CONTROL PANEL FUNCTIONS ......................................................................................................................................................10
MENU MAP ...............................................................................................................................................................................10
DMX OPERATION......................................................................................................................................................................11
MASTER/SLAVE MODE ...............................................................................................................................................................11
STANDALONE ............................................................................................................................................................................11
Automatic .................................................................................................................................................................................................. 11
Color Temperature Preset .......................................................................................................................................................................... 11
Custom Color Temperature ........................................................................................................................................................................ 11
DMX CHANNEL VALUES .............................................................................................................................................................12
2-CH Mode ................................................................................................................................................................................................ 12
3-CH Mode ................................................................................................................................................................................................ 12
7-CH Mode ................................................................................................................................................................................................ 12
MAINTENANCE...........................................................................................................................................................................13
RETURNS .................................................................................................................................................................................13
CLAIMS ....................................................................................................................................................................................13
TECHNICAL SPECIFICATIONS ..............................................................................................................................................14
CONTACT US ...........................................................................................................................................................................15

SlimPAR Pro VW User Manual 3 Rev. 3
1. BEFORE YOU BEGIN
What is Included
•SlimPAR™ Pro VW
•Hanging bracket
•Gel Holder
•Power Cord
•W arranty Card
•Quick Reference Guide or User Manual
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure
that all parts are present, and have been received in good condition. Notify the shipper
immediately and retain packing material for inspection if any parts appear damaged from
shipping or the carton itself shows signs of mishandling. Save the carton and all packing
materials. In the event that a fixture must be returned to the factory, it is important that the fixture
be returned in the original factory box and packing.
Manual Conventions
CHAUVET® manuals use the following conventions to differentiate certain types of information
from the regular text.
CONVENTION MEANING
[10] A DIP switch to be configured
<Menu> A key to be pressed on the fixture’s control panel
1~512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified (for example, showing the operating
mode/current status)
MENU >
Settings A sequence of menu options to be followed
ON A value to be entered or selected
Icons
This manual uses the following icons to indicate information that requires special attention on the
part of the user.
ICONS MEANING
This paragraph contains critical installation,
configuration or operation
information. Failure to comply with this information may render the fixture
partially or completely inoperative, cause damage to the fixture or cause
harm to the user.
This paragraph contains important installation or configuration information.
Failure to comply with this information may prevent the fixture from
functioning correctly.
Useful information.

SlimPAR Pro VW User Manual 4 Rev. 3
Safety Notes
•Please keep this User Manual for future consultation. If you sell the unit to another
user, be sure that they also receive this instruction booklet.
•Always make sure that you are connecting to the proper voltage, and that the line
voltage you are connecting to is not higher than that stated on the decal or rear panel
of the fixture.
•This product is intended for indoor use only! To prevent risk of fire or shock, do not
expose fixture to rain or moisture.
•Make sure there are no flammable materials close to the unit while operating.
•The unit must be installed in a location with adequate ventilation, at least 20 in (50 cm)
from adjacent surfaces. Be sure that no ventilation slots are blocked.
•Always disconnect from power source before servicing or replacing fuse and be sure to
replace with same fuse source.
•Secure fixture to fastening device using a safety chain.
•Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at
temperatures higher than this.
•In the event of a serious operating problem, stop using the unit immediately. Never try
to repair the unit by yourself. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
•Never connect the device to a dimmer pack.
•Make sure the power cord is never crimped or damaged.
•Never disconnect the power cord by pulling or tugging on the cord.
•Never carry the fixture directly from the cord. Always use the hanging/mounting
bracket.
•Avoid direct eye exposure to the light source while it is on.
Please read these instructions carefully. It includes important information
about the installation, usage and maintenance of this product.

SlimPAR Pro VW User Manual 5 Rev. 3
2. INTRODUCTION

SlimPAR Pro VW User Manual 6 Rev. 3
Product Overview
Power In
DMX Out
Bracket
Adjustment Knob
Fuseholder
Control Panel
(LED Display)
DMX In
Safety
Power Out
Hanging Bracket
Bracket Adjustment
Knob

SlimPAR Pro VW User Manual 7 Rev. 3
3. SETUP
AC Power
This fixture is auto-ranging and runs on 100~240 VAC, 50/60 Hz power.
To determine the power requirements for a particular fixture, see the label affixed to the back
plate of the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating
indicates its average current draw under normal conditions.
Always connect the fixture to a switched circuit. Never connect the fixture to a rheostat
(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used only
as a 0 to 100% switch.
Always connect the fixture to a circuit with a suitable electrical ground.
Power Linking
This fixture contains power linking via the Edison outlet located in front of the power input cable.
Please see the diagram below for further explanation.
The maximum quantity of SlimPAR™ Pro VW that may be linked is 22.
The power linking shown in this document is for the CHAUVET® North American version
ONLY! Therefore, it is the customer’s responsibility to check with the Dealer/Distributor
regarding power linking on the local version of the product. Connections and availability
may change, depending on the power requirements and/or regulations of each
country/region.
Additional power
link out
Fixture #1
Fixture #2
Fixture #3

SlimPAR Pro VW User Manual 8 Rev. 3
Mounting
Orientation
The SlimPAR™ Pro VW
may be mounted in any position provided there is adequate room for
ventilation.
Rigging
Be sure that the structure can support the weight of the fixture. Please see the “Technical
Specifications” section of this manual for a detailed weight listing. Mount the fixture securely. This
may be done with a screw, nut and bolt, or a hanging clamp. The hole in each bracket is 13 mm
in size. When rigging, consider routine maintenance and control panel access. Please see the
following notes on installation.
•If the power link out is intended to be used with multiple fixture, take into account the
length of each power cable, and mount the fixtures close enough to one another to
accommodate for this.
•When aiming the fixtures, you may use the bracket adjustment knob(s). Loosen the
knob(s), adjust to the desired angle, and then tighten the knob(s) by turning clockwise.
Do not use tools for this step, as it may cause damage.
•Use the rubber feet to support the fixture in a sitting position.
•Safety cables must always be used.
Bracket Adjustment
Knob
Bracket Adjustment
Knob
Safety

SlimPAR Pro VW User Manual 9 Rev. 3
Lens Assembly Replacement
The SlimPAR™ Pro VW
has an option available to replace the secondary LED optics, or lens
assembly. This will alter the beam and field angles of the fixture. The wide-angle lens assembly is
installed at the factory. The narrow lens (15°) assembly is available as an optional accessory
(SPPVWLENS17).
To replace the lens assembly in the SlimPAR™ Pro VW:
1. Remove the four Allen screws from the front trim ring with a #3 metric Allen wrench.
2. Remove the front cover (with glass still attached to the ring).
3. You now have access to the lens assembly. Use a Philips-head screwdriver to remove
the five screws that hold it in place.
4. Carefully remove the lens assembly. The LEDs and board will now be exposed. Use
caution to prevent damage.
5. Place the new lens assembly in the fixture and reinstall the five Philips screws. Tighten
screws as simultaneously as possible to the same tension. Do not over-tighten the
screws as this could cause damage.
6. Put the front cover in place and reinstall the five Allen screws.
Allen screw
Allen screw
Allen screw
Allen screw
Front cover
Lens assembly

SlimPAR Pro VW User Manual 10 Rev. 3
4. OPERATING INSTRUCTIONS
Configuring the Starting Address
The SlimPAR™ Pro VW
fixture uses 7DMX channels in its maximum setting. In this DMX
configuration/personality, the highest channel that the fixture may be set to in order to function
properly is 506. Any address higher than this will prevent access to all of the channels, while in this
mode; however, if you desire to use one of the other DMX channels configurations (personalities),
please consider the total DMX channels when selecting a DMX address.
Control Panel Functions
Access control panel functions using the f our buttons located directly underneath the LED display
on the included wired remote.
BUTTON
FUNCTION
<MENU>
Used to scroll through the
current operating mode,
as well as back out of the
current menu option
<ENTER>
Used to select a move to
the right in the menu map
and select a value and
store it to memory
<UP> Used to select increasing
advancement in the value
<DOWN> Used to select decreasing
advancement in the value
The Control Panel shows the current state of the unit. It is used to select the operating
mode, as well as the sub-features. For a detailed layout of the control panel functions,
please see the “menu map” section.
Menu Map
MAIN FUNCTION
SELECTION
SUB-SELECTION
DESCRIPTION
DMX Address
AddR
d001~d512
DMX starting address selection
Personality PERS
7CH
7-channel operating mode
3CH
3-channel operating mode: warm/cool white color
temperature mixing with dimmer
2CH
2-channel operating mode: warm/cool white color
temperature mixing
Dimming Curve dIM
OFF
Dimming curve: off
dIM1
Dimming curve: dim 1
dIM2
Dimming curve: dim 2
dIM3
Dimming curve: dim 3
Color
Temperature
Preset
C--
C-01
White 1
C-02
White 2
C-03
White 3
C-04
White 4
C-05
White 5
C-06
White 6
C-07
White 7
C-08
White 8
C-09
White 9
Custom Static
Color U--
A000~A255
Combine warm and cool white to create a custom, static
color temperature mix
W000~W255
S000~S020
Strobe speed (
000
=no strobe)
Auto Program P--
P--1~P--5
Program selection
S000~S100
Run speed
There is no strobing in the following modes:
C--
and
P--
. For full function control, use 7-
Channel DMX mode.
MENU ENTER UP DOWN

SlimPAR Pro VW User Manual 11 Rev. 3
DMX Operation
This is the operating mode which will allow for control with an external DMX controller. You must set
the starting address for this mode.
1. Plug a DMX controller into the fixture in a daisy chain configuration.
2. Press <MENU> until the following appears on the LED screen: PeRS.
3. Press <ENTER>.
4. Using <UP> & <DOWN>, select the desired personality (7-CH, 3-CH, 2-CH).
5. Press <ENTER>.
6. Press <MENU> until AddR appears on the LED screen.
7. Press <ENTER>.
8. Using <UP> & <DOWN>, select the desired DMX starting address (d001~d512).
9. Press <ENTER>.
Only connect 32 fixtures to a single DMX daisy chain!
Master/Slave Mode
This mode allows a single unit, the master, to operate in one of the standalone modes, while one or
more fixtures, slaves, synchronize their responses to the master. Master: The master fixture may be
set in any of the STANDALONE modes listed in this user manual. Slave: Set the slave fixture(s) to
DMX mode at starting address 001.
Only connect 31 slave fixtures when operating in this mode!
Standalone
This fixture has several options for operating without a DMX controller. Access these options via the
control panel on the back of the fixture.
Automatic
This fixture has preprogrammed chases that may be triggered without a controller. Access these
chases via the control panel on the back of the fixture.
1. Remove any DMX controller from the fixture.
2. Press <MENU> to select Auto Program (P--).
3. Press <ENTER>.
4. Using <UP> & <DOWN>, select one of the 5 programs.
5. Press <ENTER>.
6. Press <MENU> until S000~S100 appears on the LED screen.
7. Press <ENTER>.
8. Using <UP> & <DOWN>, select the desired run speed (slow~fast)
9. Press <ENTER>.
Color Temperature Preset
This fixture has preprogrammed, static color temperature presets that may be triggered without a
controller. Access these chases via the control panel on the back of the fixture.
1. Remove any DMX controller from the fixture.
2. Press <MENU> to select Color Temperature Preset mode (C--).
3. Press <ENTER>.
4. Using <UP> & <DOWN>, select one of the nine presets.
5. Press <ENTER>.
Custom Color Temperature
This fixture has the ability to accept a custom static color temperature setting. Access this via the
control panel.
1. Press <MENU> until U--
appears on the LED screen.
2. Press <ENTER>.
3. Using <UP> and <DOWN>, select the desired color.
4. Press <ENTER>.
5. Using <UP> and <DOWN>, select the desired color value (000~100). By selecting 000,
the color will remain off.
6. Press <ENTER> to continue to the next color (A, W).
7. Using <UP> and <DOWN>, select the desired color value (000~100).
8. Continue until the desired mix is obtained. The order of colors is warm white and cool white.
9. Press <ENTER> to continue to the strobe setting.
10. Using <UP> and <DOWN>, select the desired strobe value (000~100). By selecting 000,
the strobe function will remain off.
11. Press <ENTER> to save the final color setting. This will move the selection to the following
color. However, this is necessary to save the modification.

SlimPAR Pro VW User Manual 12 Rev. 3
DMX Channel Values
2-CH Mode
CHANNEL
VALUE
FUNCTION
1
000 255
Warm White
0%~100%
2
000 255
Cool White
0%~100%
3-CH Mode
CHANNEL
VALUE
FUNCTION
1
000 255
Master Dimmer
0%~100%
2
000 255
Warm White
0%~100%
3
000 255
Cool White
0%~100%
7-CH Mode
CHANNEL
VALUE
FUNCTION
1
000 255
Master Dimmer
0%~100%
2
000 255
Warm White
0%~100%
3
000

255
Cool White
0%~100%
4 000 009
010 255
Strobe
No function
1~20 Hz (slow~fast)
5
000 051
052 101
102 152
153 203
204 254
255 255
Auto Program
No Function
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
6
000 255
Auto Program Speed (only when CH.7 is between 052~255)
0%~100% (slow~fast)
7
000 051
052 101
102 152
153 203
204 255
Dimmer Speed
Default dimmer speed
Linear dimmer
Non-linear dimmer 1
Non-linear dimmer 2
Non-linear dimmer 3

SlimPAR Pro VW User Manual 13 Rev. 3
Maintenance
To maintain optimum performance and minimize wear, fixtures should be cleaned frequently.
Usage and environment are contributing factors in determining frequency. As a general rule,
fixtures should be cleaned at least twice a month. Dust build up reduces light output performance
and can cause overheating. This can lead to reduced lamp life and increased mechanical wear.
Be sure to power off fixture before conducting maintenance.
•Unplug fixture from power.
•Use a vacuum or air compressor and a soft brush to remove dust collected on external
vents.
•Clean all lenses when the fixture is cool with a mild solution of glass cleaner or
Isopropyl Alcohol and a soft lint free cotton cloth or lens tissue.
•Apply solution to the cloth or tissue and drag dirt and grime to the outside of the lens.
•Gently polish optical surfaces until they are free of haze and lint.
The cleaning of external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the fixture operates.
Damp, smoky or particularly dirty surroundings can cause greater accumulation of dirt on the
unit’s optics. Clean with soft cloth using normal glass cleaning fluid. Clean the external optics at
least every 20 days. Clean the fixture at least every 30/60 days.
Always dry the parts carefully after cleaning them.
Never spin a fan using compressed air.
Returns
Returned merchandise must be sent prepaid and in the original packing; call tags will not be
issued. Package must be clearly labeled with a Return Merchandize Authorization Number (RMA
#). Products returned without the RMA # will be refused. Call CHAUVET® and request an RMA #
prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief
description of the cause for the return. Be sure to pack fixture properly; any shipping damage
resulting from inadequate packaging is the customer’s responsibility. As a suggestion, proper
UPS packing or double-boxing is always a safe method to use. CHAUVET® reserves the right to
use its own discretion to repair or replace product(s).
If you are given an RMA #, please include the following information on a piece of paper
inside the box:
1) Your name
2) Your address
3) Your phone number
4) The RMA #
5) A brief description of the symptoms
Claims
Damage incurred in shipping is the responsibility of the shipper; therefore, the damage must be
reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify
and submit claims with the shipper in the event that a fixture is damaged due to shipping. Any
other claim for items such as missing component/part, damage not related to shipping, and
concealed damage, must be made within seven (7) days of receiving merchandise.

SlimPAR Pro VW User Manual 14 Rev. 3
TECHNICAL SPECIFICATIONS
WEIGHT & DIMENSIONS
Length........................................................................................................................................................... 3.4 in (87 mm)
Width......................................................................................................................................................... 10.1 in (256 mm)
Height ....................................................................................................................................................... 11.2 in (285 mm)
Weight...........................................................................................................................................................6.3 lbs (2.8 kg)
POWER
Auto-ranging ................................................................................................................................. 100~240 VAC, 50/60 Hz
Power c onsumption @ 120 V ............................................................................................39 W (0.6 A) max, 0.3 A inrush
Power consumption @ 230 V ............................................................................................39 W (0.3 A) max, 0.4 A inrush
Power output ................................................................................................................................................... 22 units max
Fuse..................................................................................................................................................................F 2 A, 250 V
LIGHT SOURCE
Type........................................................................................................................................................high-powered LED
Quantity ......................................................................................................................... 36 (18 warm white, 18 cool white)
Rating .........................................................................................................................................1 W (350 mA), 50,000 hrs
PHOTO OPTIC (WIDE) (INSTALLED)
Lux ...................................................................................................................................................................6,050 @ 1 m
Beam angle .....................................................................................................................................................................21°
Field angle.......................................................................................................................................................................42°
PHOTO OPTIC (NARROW) (OPTIONAL)
Lux ...................................................................................................................................................................8,750 @ 1 m
Beam angle .....................................................................................................................................................................17°
Field angle.......................................................................................................................................................................36°
COLOR TEMPERATURE
Variable......................................................................................................................................................2,300 K~6,300 K
INDOOR/OUTDOOR
Rating ....................................................................................................................................................For indoor use only
THERMAL
Maximum ambient temperature................................................................................................................... 104° F (40° C)
CONTROL & PROGRAMMING
Data input ........................................................................................................................... locking 3-pin XLR male socket
Data output ...................................................................................................................... locking 3-pin XLR female socket
Data pin configuration .........................................................................................................pin 1 shield, pin 2 (-), pin 3 (+)
Protocols....................................................................................................................................................DMX-512 USITT
DMX Channels (user-configurable) ...........................................................................................................................2, 3, 7
ORDERING INFORMATION
SlimPAR™ Pro VW .................................................................................................................................................SPPVW
Optional 17° (Narrow) Lens ......................................................................................................................SPPVWLENS17
WARRANTY INFORMATION
W arranty ..........................................................................................................................................2-year limited warranty

SlimPAR Pro VW User Manual 15 Rev. 3
CONTACT US
World Wide
General Information CHAUVET®
5200 NW 108th Ave
Sunrise, FL 33351
voice: 954.929.1115
fax: [phone]
toll free: 800.762.1084
Technical Support CHAUVET®
5200 NW 108th Ave
Sunrise, FL 33351
voice: 954.929.1115 (Press 4)
fax: [phone] (Attention: Service)
World Wide Web www.chauvetlighting.com