Chauvet WELL User manual

User Manual

WELL™ 2.0 User Manual Rev. 01
Edition Notes
The WELL™ 2.0 (Wireless Event LED Luminaire) User Manual Rev. 01 covers the
description, safety precautions, installation, programming, operation, and
maintenance of the WELL™ 2.0 product.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET®
or Chauvet). The CHAUVET® logo in its entirety including the Chauvet name and
the dotted triangle, and all other trademarks on this manual pertaining to services,
products, or marketing statements (example: It’s Green Thinking™) are owned or
licensed by CHAUVET®. Any other product names, logos, brands, company names,
and other trademarks featured or referred to within this document are the property of
their respective trademark holders.
Copyright Notice
CHAUVET® owns the content of this user manual in its entirety, including but not
limited to pictures, logos, trademarks, and resources.
© Copyright 2013 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America
Manual Usage
CHAUVET® authorizes its customers to download and print this manual for
professional information purposes only. CHAUVET® expressly prohibits the usage,
copy, storage, distribution, modification, or printing of this manual or its content for
any other purpose without its written consent.
Document Printing
For better results, print this document in color, on letter size paper (8.5 x 11 inches),
double sided. If using A4 paper (210 x 297 mm), configure your printer to scale the
content accordingly.
Intended Audience
Any person in charge of installing, operating, and/or maintaining this product should
read the guide that shipped with it as well as this manual in their entirety before
installing, operating, or maintaining this product.
Disclaimer
CHAUVET® believes that the information contained in this manual is accurate in all
respects. However, CHAUVET® assumes no responsibility for any error or
omissions in this document. CHAUVET® reserves the right to revise this document
and to make changes from time to time in the content hereof without obligation of
CHAUVET® to notify any person or company of such revision or changes. This
does not constitute in any way a commitment by CHAUVET® to make such
changes. CHAUVET® may issue a revision of this manual or a new edition of it to
incorporate such changes.
CHAUVET®
Publications Hot Line
If you have any comments about the accuracy of this document or general
suggestions regarding how we can improve it, please call us at [phone] (US
callers) or [phone] (international callers). You can download the latest
versions of all CHAUVET® products’ manuals from www.chauvetlighting.com.
Document Revision
The WELL™ 2.0 User Manual Rev. 01 supersedes all previous versions of this
manual. Please discard any older versions of this manual you may have, whether in
printed or electronic format, and replace them with this version.
Author Date Editor Date
D. Couppe 05/29/13 T. Yeago 05/29/13

WELL™ 2.0 User Manual Rev. 01 -a-
Table of Contents
1. Before You Begin...............................................................................................1
What is Included..................................................................................................................1
Unpacking Instructions........................................................................................................1
Text Conventions................................................................................................................1
Icons....................................................................................................................................1
Product at a Glance ...........................................................................................................1
Safety Notes........................................................................................................................2
Expected LED Lifespan ......................................................................................................2
2. Introduction........................................................................................................3
Product Description.............................................................................................................3
Features..............................................................................................................................3
DMX Channel Summary.....................................................................................................4
Product Overview................................................................................................................5
Product Dimensions............................................................................................................6
3. Setup...................................................................................................................7
AC Power............................................................................................................................7
AC Plug .......................................................................................................................................7
Fuse ............................................................................................................................................7
DMX Linking........................................................................................................................7
DMX Modes.................................................................................................................................7
Master/Slave Connectivity...........................................................................................................8
Mounting .............................................................................................................................8
Orientation...................................................................................................................................8
Rigging........................................................................................................................................8
4. Operation............................................................................................................9
Operation Notes..................................................................................................................9
Turning Unit On...........................................................................................................................9
Turning Unit Off...........................................................................................................................9
Tilt Angle .....................................................................................................................................9
LEDs Angle..................................................................................................................................9
Password.....................................................................................................................................9
Storage Notes.....................................................................................................................9
Battery Charge Notes .......................................................................................................10
Wireless Operation ...........................................................................................................11
Initial Setup................................................................................................................................11
Configuration.............................................................................................................................11
Fixture Pairing ...........................................................................................................................11
Control Panel Description .................................................................................................12
Control Options.................................................................................................................12
Programming.....................................................................................................................12
DMX Personality........................................................................................................................12
DMX Control..............................................................................................................................12
Static Color................................................................................................................................13
Auto Programs...........................................................................................................................13
Edit Customs.............................................................................................................................13
Master/Slave..............................................................................................................................13
Color Setting..............................................................................................................................14
Dimmer Curves..........................................................................................................................14
Control Panel Lock....................................................................................................................14
Color Macro Adjustment............................................................................................................14
RGB to White Adjustment.........................................................................................................15
Battery Life ................................................................................................................................15
Program Upload ........................................................................................................................15

-b- WELL™ 2.0 User Manual Rev. 01
Reset.........................................................................................................................................16
TOUR Notes......................................................................................................................16
Master Dimmer..........................................................................................................................16
Red, Green, and Blue Color Selection.......................................................................................16
Color Macros.............................................................................................................................16
Strobe........................................................................................................................................16
Auto/Custom..............................................................................................................................16
Dimmer Speed...........................................................................................................................16
Menu Map.........................................................................................................................17
DMX Values......................................................................................................................18
TOUR ........................................................................................................................................18
ARC.1........................................................................................................................................19
AR1.D........................................................................................................................................19
AR1.S........................................................................................................................................19
HSV...........................................................................................................................................19
BLOC.........................................................................................................................................19
5. Technical Information......................................................................................20
Fixture Maintenance .........................................................................................................20
Troubleshooting Guide......................................................................................................21
Returns Procedure............................................................................................................22
Claims ...............................................................................................................................22
Contact Us ........................................................................................................................22
Technical Specifications ...................................................................................................23

WELL™ 2.0 User Manual Rev. 01 Page 1 of 28
1. Before You Begin
What is
Included
Single Unit:
•One WELL™ 2.0 fixture
•One Battery Charger
•Warranty Card
•Quick Reference Guide
Six-piece Set:
•Six WELL™ 2.0 fixtures
•One six-bay flight case with built-in
battery charger
•Warranty Card
•Quick Reference Guide
Unpacking
Instructions
Immediately upon receiving this product, carefully unpack it and check the container in
which you received it. Make sure that you have received all the parts indicated above and
that they are all in good condition. If the material inside the container (this product and any
other accessory included with it) appears damaged from shipping, or if the container shows
signs of mishandling, notify the shipper immediately. In addition, retain the container and
all the packing material for inspection.
See the Claims section in the Technical Information chapter.
Text
Conventions
Convention Meaning
1~512
A range of values in the text
50/60
A set of mutually exclusive values in the text
Claims
A new term, or a section or chapter in this document
<SET>
A button on the fixture’s control panel
Settings
A fixture function or a menu option
MENU > Settings
A sequence of menu options
1~10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to entered or select in a menu
Icons
Icon
Meaning
This icon indicates critical installation, configuration, or operation
information. Failure to comply with this information may render the
fixture partially or completely inoperative, damage third-party
equipment, or cause harm to the user.
This icon indicates important installation or configuration
information. Failure to comply with this information may prevent
the fixture from functioning correctly.
This icon indicates useful, although non-critical information.
The term “DMX” used throughout this document refers to the USITT DMX512-A
transmission protocol.
Product at
a Glance
Use on Dimmer
x
Auto Programs
P
Temporary Outdoor Use
(IP44)
P
Auto-ranging battery charger
P
Sound Activated
x
Replaceable Fuse
x
DMX
P
User Serviceable
x
Master/Slave
P
Duty Cycle
x

Page 2 of 28 WELL™ 2.0 User Manual Rev. 01
Safety Notes
Please read the following notes carefully because they include important safety
information about the installation, usage, and maintenance of this product.
It is important to read all these notes before starting to work with this product.
There are no user serviceable parts inside this product. Any reference to servicing
it you may find from now on in this User Manual will only apply to properly
CHAUVET® certified technicians. Do not open the housing or attempt any repairs
unless you are one of them.
Please refer to all applicable local codes and regulations for the proper installation
of this product.
Personal Safety
•Avoid direct eye exposure to the light source while the fixture is on.
•Always disconnect this product from its battery charger and turn the battery switch off
before servicing.
•Always connect this product’s battery charger to a grounded circuit to avoid the risk of
electrocution.
•Do not touch this product’s housing when operating because it may be hot.
Mounting and Rigging
•Do not submerge this product or subject it to water jets (IP44). Regular outdoor
operation under light rain or splashing water is fine.
•Do not hang this product, as this is a floor-standing fixture.
•Do not tilt this product further than 10º.
•Always carry this product using the built-in handle.
•Do not leave any flammable material within 50 cm of this product while operating or
recharging the battery.
Power and Wiring
•Always make sure that you are connecting this product’s battery charger to the proper
voltage, as per the specifications in this manual or on the product’s sticker.
•Never connect this product’s battery charger to a dimmer pack or rheostat.
•Never disconnect this product’s battery charger by pulling or tugging on the power
cable.
Operation
•Do not operate this fixture if you see damage on the housing, lenses, or cables. In any
of these cases, have the damaged parts replaced by an authorized technician at once.
•Do not cover the ventilation slots when the fixture is operating to avoid internal
overheating.
•The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this product
at a higher temperature.
•Do not close the flight case/charger lid when during charging.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, please
contact CHAUVET® Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single LED conditions.
For this reason, using clustered LEDs at their fullest intensity significantly reduces the
LEDs’ lifespan. Under normal conditions, this lifespan can be of 40,000 to 50,000 hours. If
extending this lifespan is vital, lower the operational temperature by improving the fixture’s
ventilation and reducing the external temperature. In addition, limiting the overall
projection intensity may also help to extend the LEDs’ lifespan.

WELL™ 2.0 User Manual Rev. 01 Page 3 of 28
2. Introduction
Product
Description
The WELL™ 2.0 (Wireless Event Light Luminaire) is a battery powered, portable upward
wash light. It consists of a single unit that contains the 12 V gel battery, the LEDs, the LED
drivers, and the main control. The battery provides up to 12 hours of runtime.
When purchased as a single unit, it comes with a stand-alone single unit battery charger.
Additional batteries are available for purchase.
When purchased as a 6-piece set, they come with an empty flight case that has six
storage bays and a built-in charger. Each storage bay in the flight case has its own battery
charging connector. This allows recharging all six WELL™ 2.0 units simultaneously while
in the flight case. The W-DMX (Wireless DMX) transmitter is available for purchase
separately.
Features
•3, 4, 5, 6, or 10-channel tri-color RGB LED upward wash light
•Operating modes:
3-channel: RGB control
3-channel: HSV control
4-channel: RGB, dimmer
5-channel: RGB, dimmer, strobe
6-channel: RGB control of both sides of array
10-channel: RGB, ID addressing, dimmer, strobe, macro, auto/custom, dimmer
curve, auto speed
•RGB color mixing with or without DMX control
•Color temperature presets (3,200~10,000 K)
•Built-in automated programs via DMX
•Recall custom programs via DMX
•Five distinct dimming curves
•3-pin DMX input and output connectors
•Wireless DMX receiver built-in
•Fixed Position Antenna for added stability
•LED display with password protection
•Split LED Array for individual focusing
•Heavy duty charting plug
•12-hour battery life
•Movable foot on base of fixture for added positioning options
•Color calibration

Page 4 of 28 WELL™ 2.0 User Manual Rev. 01
DMX Channel Summary
Tour
DMX Channel
Function
1
Master Dimmer
2
Module 1 Red
3
Module 1 Green
4
Module 1 Blue
5
Module 2 Red
6
Module 2 Green
7
Module 2 Blue
8
Color Macro + White Balance
9
Strobe
10
Auto + Custom Programs
11
Auto Speed
12
Dimmer Speed
ARC.1
DMX Channel Function
1
Red
2
Green
3
Blue
AR1.D
DMX Channel Function
1
Master Dimmer
2
Red
3
Green
4
Blue
AR1.S
DMX Channel Function
1
Master Dimmer
2
Red
3
Green
4
Blue
5
Strobe
HSV
DMX Channel Function
1
Hue
2
Saturation
3
Value
BLOC
DMX Channel
Function
1
Module 1 Red
2
Module 1 Green
3
Module 1 Blue
4
Module 2 Red
5
Module 2 Green
6
Module 2 Blue

WELL™ 2.0 User Manual Rev. 01 Page 5 of 28
Product Overview
Front View
Bottom View
DMX In/Out
On/Off Switch
Handle
Power Indicator
LED Panels
Control Panel
Storage Battery Switch
Retractable Foot
Foot Release
W DMX Antenna
LED Panel Adjust
Battery Connector

Page 6 of 28 WELL™ 2.0 User Manual Rev. 01
Product Dimensions

WELL™ 2.0 User Manual Rev. 01 Page 7 of 28
3. Setup
AC Power
The WELL’s battery charger, whether stand-alone or inside the flight case, has an auto-
ranging power supply that
can work with an input voltage range of 100~240 VAC,
50/60 Hz.
Make sure that you are connecting this product to the prope
r voltage, as per the
specifications in this guide, the product’s user manual, or on the product’s sticker.
Always connect this product’s battery charger to a protected circuit with an
appropriate electrical ground to avoid the risk of electrocution or fire.
Never connect this product’s battery charger to a rheostat (variable resistor) or
dimmer circuit, even if the rheostat or dimmer channel serves only as a
0 to 100% switch.
AC Plug
The WELL’s battery charger comes with a power input cord terminated with an Edison plug
(US market). If the power input cord that came with your product has no plug or you need
to change the Edison plug, use the table below to wire the new plug.
Connection Wire (US) Wire (Europe) Screw Color
AC Live Black Brown Yellow/Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Make sure to disconnect the fixture’s power cord before replacing a blown fuse, and
always replace it with a fuse of the same type and rating.
Fuse
The stand-alone battery charger has no external fuse. However, the
flight case/charger comes with a replaceable fuse (T 6.3 A @ 250 V).
To change the fuse on the flight case/charger, do the following:
1) Disconnect the fixture from the power outlet.
2) With a Phillips #2 head screwdriver, unscrew the fuse holder cap
from its housing.
3) Remove the blown fuse and replace it with a good fuse of the
same type and rating (T 6.3 A @ 250 V).
4) Screw the fuse holder cap back in its place and reconnect power.
DMX Linking
You may link the WELL™ 2.0 to a DMX controller using a standard DMX serial connection.
If using other DMX compatible fixtures with this product, it is possible to control them
individually with a single DMX controller.
If you are not familiar with the DMX standard, or if you need information about the DMX
cables needed to link the WELL™ 2.0 to a DMX controller, you may download the “DMX
Primer” document from the CHAUVET® Web site.
DMX Modes
The WELL™ 2.0 uses the standard DMX data connection for its TOUR, ARC.1, AR1.D,
AR1.S, HSV, and BLOC DMX modes. You will find information about these DMX modes in
the Introduction chapter (DMX channel summary), the Operation chapter (configuration
details), and the DMX Values section (individual channel values).

Page 8 of 28 WELL™ 2.0 User Manual Rev. 01
Master/Slave
Connectivity
The Master/Slave mode allows a WELL™ 2.0 unit to control or more WELL™ 2.0 units
without a DMX controller. See the Master/Slave section of the Operation chapter for
programming information. The master links to the slave fixtures using the standard DMX
serial connection. If you are not familiar with the Master/Slave connectivity, you may
download the “DMX Primer” document from the CHAUVET® Web site.
Note: This function is not available under wireless operation.
DO NOT connect a DMX controller to the fixtures operating in Master/Slave mode.
Otherwise, the signals from the DMX controller may interfere with the signals from
the master fixture.
The Operation chapter of this manual provides detailed instructions on how to
configure the Master and Slave units.
Mounting
Before mounting this product, read and follow the safety recommendations indicated in the
Safety Notes section (page 2 of this manual).
Orientation
Always mount this product in any safe position while making sure that there is adequate
room around it for ventilation, configuration, and maintenance.
Rigging
CHAUVET® recommends following the general guidelines below when mounting this
product.
•When selecting an installation location, consider ease of access to the fixture for
operation, programming adjustments, and routine maintenance.
•Make sure to place this product away from any flammable material as indicated in the
Safety Notes section.
•This unit’s rating is IP 44. Therefore, do not mount the product in places where heavy
rain, water jets, extreme temperature changes, or restricted ventilation may affect it.
•This is a floor-standing fixture. Do not hang this unit.
Procedure
•Make sure that you mount this product on a hard, steady surface that can support its
weight.
•Do not tilt this product further than 10º or mount it on its side.
Mounting Diagram
Retractable
Foot
Correct Floor Mounting
Incorrect Floor Mounting

WELL™ 2.0 User Manual Rev. 01 Page 9 of 28
4. Operation
Operation
Notes
•Always operate the unit in an upright position.
•Never tilt the unit more than 10º.
•Only use the retractable foot to tilt the unit.
•Do not operate the unit in a sealed enclosure or in an area without air circulation.
Turning Unit On
•Turn the battery storage switch on.
•Push the On/Off switch on the top for more than three seconds (the built-in red LED
will illuminate solid).
•When not connected to the battery charger, the power status LED indicates the
amount of remaining battery charge, as follows:
Green: >70 % (100~70% charge)
Yellow: >20 % (69~21 % charge)
Red: Empty (20~0 % charge)
Turning Unit Off
•Push the On/Off switch on the top for more than three seconds (the built-in red LED
will turn off).
•If storing the unit for more than seven days after recharging it, also turn the battery
storage switch off.
Tilt Angle
•Place the fixture on a flat, sturdy surface.
•Release the extensible foot by shifting the foot release lever.
•Keep the lever shifted to adjust the angle and release the lever.
•Do not allow the unit to tilt further than 10º.
LEDs Angle
•Use the screws on the unit’s front panel to adjust the angle of the LED panels.
•The screw on the left adjusts the rear LED panel.
•The screw on the right adjusts the front LED panel.
Password
After being prompted, enter the following password by pressing:
<UP>, <DOWN>< <UP>, <DOWN>, <ENTER>
The password cannot be changed and must be used when prompted.
Storage Notes
•Always store the unit in an upright position (≤ 10º tilt).
•Recharge the battery to full capacity before storing the unit.
•Store charged unit(s) in a dry environment, away from direct sunlight.
•Turn the battery storage switch off if storing the unit for more than seven days.

Page 10 of 28 WELL™ 2.0 User Manual Rev. 01
Battery Charge
Notes
•Make sure to turn the battery storage switch on before connecting the unit to the
charger.
•Always use the supplied charger to recharge the built-in battery.
•Recharge the battery within three days of last use.
•Recharge the battery to full capacity before storing this product.
•For best results, charge the battery in a temperature between 32º F (0º C) and 95º F
(35º C).
•When charging the battery, keep the unit at no less than 1 m from any open flame or
hot plate.
•When charging the battery inside the flight case/charger, keep the flight case’s cover
open.
•Always charge the battery with the unit in an upright position.
•Do not keep charging the battery for more than 24 hours.
•Perform a full discharge/recharge cycle every three months.
•During charging, the green power indicator LED will illuminate solid, regardless of the
level of charge of the battery.
•Once fully charged, while still connected to the battery charger, the green power
indicator LED will turn off.
Flight Case/Charger
Power Input Panel
Battery Connector

WELL™ 2.0 User Manual Rev. 01 Page 11 of 28
Wireless
Operation
The WELL™ 2.0 can operate in W-DMX mode up to 300 m (900 feet) from the W-DMX
transmitter. The W-DMX receiver in the WELL unit must be paired with the W-DMX
transmitter for wireless operation.
Initial Setup
1) Turn the W-DMX transmitter on.
2) Connect the W-DMX transmitter to a DMX controller.
3) Place the WELL™ 2.0 unit within 300 m from the W-DMX transmitter.
4) Disconnect any DMX cable from the WELL™ 2.0 unit.
5) Push the antenna release to allow the W-DMX antenna to extend outside the metal
housing.
6) Set the antenna in the upright position.
7) Turn the WELL™ 2.0 unit on.
Configuration
1) From the WELL’s control panel, go to RUN > DMX.
2) Select the start address, as with any other DMX compatible product.
3) Go to WDMX > ACTI.
4) Select ON.
Fixture Pairing
Fixture Already Paired
1) If the WELL™ 2.0 unit has already been paired with the WDMX transmitter, the red
LED on the On/Off switch will flash slowly.
2) In this case, the WELL™ 2.0 unit is ready to work in wireless mode.
Pairing the WELL™ 2.0 Unit and a new W-DMX Transmitter
1) From the WELL’s control panel, go to WDMX > REST.
2) Select YES (the red LED on the On/Off switch will illuminate solid).
3) From the W-DMX transmitter, press <RESET> (the SIGNAL indicator will flash).
4) Once the transmitter has found the WELL fixture, the SIGNAL indicator on the W-
DMX transmitter will illuminate solid.
5) The red LED on the On/Off switch will flash slowly indicating the presence of DMX
signal.
WDMX Setup
Control Panel
WDMX Transmitter

Page 12 of 28 WELL™ 2.0 User Manual Rev. 01
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER> Enables the currently displayed menu or
sets the currently selected value in to the
current function
<UP> Navigates upwards through the menu list
and increases the numeric value when in a
function
<DOWN> Navigates downwards through the menu list
and decreases the numeric value when in a
function
Control Options
You can set the WELL™ 2.0 start address in the 001~512 DMX range. This allows for the
control of up to 42 fixtures in the 12-channel TOUR personality.
Programming
Refer to the Menu Map on page 17 to learn how the menu options relate to each other.
The menu map has a Menu Level and a variable number of programming levels for each
option.
To go to an option in the Menu Level, press <MENU> repeatedly until the option shows on
the display. Press <ENTER> to select it. This will take you to the first programming level for
that option.
To select an option or value within the current programming level press <UP> or <DOWN>
until it shows on the display. Press <ENTER> to accept it. In this case, if there is another
programming level, you will see its first option. Otherwise, you will see the selected value.
To exit to the previous menu level, press <MENU>.
DMX Personality
This setting allows the user to choose a particular DMX personality.
1) Go to PERS.
2) Select the desired personality (TOUR, ARC.1, AR1.D, AR1.S, HSV, or BLOC).
3) See the DMX Values section for the highest starting address you can select for each
personality.
4) Make sure that the starting addresses on the various fixtures do not overlap due to the
new personality setting. See the DMX Values section.
DMX Control
In this mode, each unit will respond to a unique starting address from the DMX controller.
All units with the same starting address will respond in unison.
1) Select a DMX personality, as shown in DMX Personality.
2) Set the running mode:
a) Go to RUN.
b) Select DMX.
3) Set the starting address:
a) Go to ADDR.
b) Select the starting address (001~512).
To ensure full access to all channels in each DMX mode, the highest recommended DMX
addresses are as follows:
DMX Mode DMX Address DMX Mode DMX Address DMX Mode DMX Address
TOUR
503
AR1.D
509
HSV
510
ARC1
510
AR1.S
508
BLOC
507
Continues on the next page

WELL™ 2.0 User Manual Rev. 01 Page 13 of 28
Continued from previous page
Static Color
The Static Color mode allows for permanent RGB color mixing without a DMX controller.
1) Go to STAT.
2) Select the desired color (RED, GREN, or BLUE).
3) Select the desired color value (0~255).
4) Repeat for the other colors.
5) Select STRB.
6) Select the desired frequency (0~20).
Auto Programs
Auto programs allow for dynamic RGB color mixing without a DMX controller.
1) Go to AUTO.
2) Select the desired auto (AT.01~10) or custom program (PR.01~10).
You cannot edit any of the auto programs (AT.01~10). However, you can edit the
custom programs (PR.01~10). See Edit Customs for details.
Edit Customs
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1) Go to EDIT.
2) Select the desired auto program (PR.01~10).
3) Select the desired scene (SC.01~30).
4) Select the desired color or effect (RED, GREN, BLUE, STRB, TIME, or FADE).
5) Select the color or effect value (000~255 for colors and timers, or 00~20 for strobe).
6) Repeat for the other colors or effects.
7) Return to the SCENE level (step “3”).
8) Repeat the settings of colors and effects for the other scenes.
Master/Slave
The Master/Slave mode allows a group of WELL fixtures (the slaves) to simultaneously
duplicate the output of another WELL (the master), whether static mode settings or
auto/custom programs, without a DMX controller.
1) Set the master unit:
a) Set the running mode to DMX as explained in “DMX Control.”
b) Select an auto or custom program, as explained in “Auto Programs”, or a static mix
of colors.
2) Set each of the slave units:
a) Go to RUN.
b) Select
SLAV
.
•The fixture that is set to run a program,
whether Auto or Custom, or to operate in
Static mode automatically becomes the master.
•Do not connect a DMX controller to the master or slave fixtures.
•The master unit should be the first in the DMX string.
Continues on the next page

Page 14 of 28 WELL™ 2.0 User Manual Rev. 01
Continued from previous page
Color Setting
The COLOR setting determines how the WELL generates the white color based on various
RGB settings.
1) Go to SET.
2) Select COLO.
3) Select OFF, RGBW, or UC.
OFF: When the RGB faders are all set to “255”, the output is maximum,
although the resulting white color may not be balanced.
RGBW: When the RGB faders are all set to “255”, the resulting output is defined by
the configured White color (see
RGB to White Adjustment ).
UC: When the RGB faders are all set to “255”, the output matches that of less
efficient fixtures (Universal Color).
Dimmer Curves
This setting determines how fast the output of the WELL changes when the operator
modifies the values of the Red, Green, Blue, and Dimmer faders.
1) Go to SET.
2) Select DIM.
3) Select a dimmer curve (OFF, DIM1, DIM2, DIM3, or DIM4).
OFF: The output is proportional (linear) to the Dimmer and RGB channel values.
DIM1~4: The output follows the Dimmer and RGB channel values based on the
corresponding dimmer curve, being DIM1 the fastest and DIM4 the
slowest.
Control Panel
Lock
This setting allows the user to activate or disable the control panel lock, which keeps non-
authorized personnel from changing the fixture’s settings.
1) Go to KEY.
2) Select ON or OFF.
When the control panel lock is active, the fixture will prompt the user to enter the
password after 30 seconds of control panel inactivity or after turning on the fixture.
After being prompted to enter the password:
Press <UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>.
Color Macro
Adjustment
This setting allows the user to select and edit the temperature of the white colors used in
channel 8 (Macros) when in the TOUR mode.
1) Go to CAL1.
2) Select a white color (WH.01~11).
3) Select a color (RED, GREN, or BLUE).
4) Select a color value (0~255).
5) Repeat for the other colors.
Continues on the next page

WELL™ 2.0 User Manual Rev. 01 Page 15 of 28
Continued from previous page
RGB to White
Adjustment
This setting allows the user to select and edit the temperature of the white color shown
when RGB to White (RGBW) is active in SET > COLO (see Color Setting).
1) Go to CAL2 and
2) Press <ENTER> when you see RGB.W on the display.
3) Select a color (RED, GREN, or BLUE).
4) Select a color value (0~255).
5) Repeat for the other colors.
The values of RED, GREEN, and BLUE configured from RGB.W will define the color
temperature shown when the RGB faders are set to “255” if SET > COLO > RGBW is
active.
Battery Life
This setting allows the user to select the output intensity for a given runtime (battery life).
1) Go to SET.
2) Select LIFE.
3) Select a battery life (NORM or LONG).
When the LIFE parameter is set to NORM, the battery life is approx. 10 hours. When
the LIFE parameter is set to LONG, the battery life extends to approx. 12 hours.
Program Upload
This option allows the user to copy the custom programs of one WELL fixture onto other
WELL fixtures by using the Master/Slave method.
1) Configure and connect the fixtures in a Master/Slave arrangement, where the master
unit has the custom programs you want to transfer onto the slave units.
2) At the master unit, go to SET.
3) Select UPLD.
4) When PASS shows, press <ENTER>.
5) Enter the master access password as shown in Control Panel Lock.
6) When SEND shows, press <ENTER> to start the upload.
7) Wait for the upload process to finish (the display will show END) before continuing or
turning the fixtures off.
During and after the upload, the master and slave units will visually indicate the
status of the process, as follows:
•Yellow means that the upload is running.
•Red means that the upload failed due to an error.
•Green means that the upload completed successfully.
DO NOT upload the program from a WELL onto a different fixture. Otherwise, you
could render the other fixture inoperative.
Continues on the next page

Page 16 of 28 WELL™ 2.0 User Manual Rev. 01
Continued from previous page
Reset
This setting allows the user to reset the WELL fixture to its default values, including
deleting the custom programs.
1) Go to SET.
2) Select REST.
3) When prompted, enter the master access password as shown in Control Panel Lock.
4) Wait for the reset process to finish.
Default Values
Parameter
Default Value
Parameter
Default Value
STAT
R/G/B.000
LIFE
NORM
AUTO
AT.01
EDIT
PR.01/SC.01
ADDR
D.001
CAL1
WH.01
RUN
DMX
RGB.W
R/G/B.255
PERS
TOUR
WDMX
ACTI
DIM
DIM4
KEY
OFF
COLO
UC
TOUR Notes
These notes intent to clarify the way the TOUR DMX personality works.
Master Dimmer
•Channel 1 (Dimmer) controls the intensity of the currently projected color.
•When the slider is at the highest position (255) the intensity of the output is at its
maximum.
Red, Green, and
Blue Color
Selection
•Channels 2 though 7 control the intensity ratio of each of the Red, Green, and Blue
colors on each LED panel.
•When these six sliders are at their highest setting (255), the intensity of each color is at
its maximum if SET > COLO is OFF.
Color Macros
•Channel 8 (Macros) selects the required color macro.
•Channel 8 has priority over channels 2 through 7.
•
Channel 1 (Dimmer) controls the intensity of the selected color macro.
Strobe
•Channel 9 controls the strobe frequency (not the intensity) of channels 2 through 7.
•Channel 9 can strobe channels 2 through 7 when the WELL is not running macros
(channel 8 inactive), thus allowing the individual color faders as well as channel 1
(Dimmer) to control the output intensity.
•Channel 9 can strobe channel 8 when the WELL is running macros (channel 8 active),
allowing channel 8 to select the macro and channel 1 to control the output intensity.
Auto/Custom
•Channel 10 (Auto/Custom) selects the preset auto programs
AT.01~10
or the custom
programs PR.01~10.
•Channel 10 has priority over channels 2 through 9.
•
Channel 11 determines the speed at which each auto program (AT.01~10) plays.
Dimmer Speed
•Channel 12 selects the dimmer mode and speed. When DIM is set to OFF,the changes
in the RGB and Dimmer faders are linear. Otherwise, DIM1 is the fastest dimmer curve,
while DIM4 is the slowest.