Chauvet Mini 4 Bar User manual

User Manual

Page 2 of 15 Mini 4 Bar™ 2.0 User Manual Rev. 6
TABLE OF CONTENTS
1. Before you Begin............................................................................................................3
What is Included ........................................................................................................................3
Unpacking Instructions...............................................................................................................3
Claims ..............................................................................................................................................3
Text Conventions.......................................................................................................................3
Icons..........................................................................................................................................3
Document Information................................................................................................................3
Product at a Glance ...................................................................................................................4
Safety Notes..............................................................................................................................4
2. Introduction....................................................................................................................5
Product Overview.......................................................................................................................5
Product Dimensions...................................................................................................................5
3. Setup...............................................................................................................................6
AC Power ..................................................................................................................................6
Fuse Replacement............................................................................................................................6
Power Linking ...................................................................................................................................7
Mounting....................................................................................................................................8
Orientation........................................................................................................................................8
Rigging .............................................................................................................................................8
4. Operation........................................................................................................................9
Control Panel Operation.............................................................................................................9
Menu Map..................................................................................................................................9
Configuration (DMX) ..................................................................................................................9
Starting Address................................................................................................................................9
Configuration (Standalone).......................................................................................................10
Sound-Active Mode.........................................................................................................................10
Automatic Mode..............................................................................................................................10
Master/Slave Mode .........................................................................................................................10
Footswitch Operation.......................................................................................................................11
Disconnecting the Footswitch ..........................................................................................................11
DMX Channel Assignments and Values...................................................................................12
15-CH.............................................................................................................................................12
3-CH...............................................................................................................................................12
5. Technical Information..................................................................................................13
Maintenance............................................................................................................................13
6. Technical Specifications..............................................................................................14
Contact Us...............................................................................................................................15
Returning Products to CHAUVET® ..........................................................................................15

Mini 4 Bar™ 2.0 User Manual Rev. 6 Page 3 of 15
1.BEFORE YOU BEGIN
What is
Included
•Mini 4 Bar™ 2.0
•Carrying Bag
•Tripod
•Tripod Carrying Bag
•Footswitch
•2 x Hanging Brackets with mounting
hardware
•Power Cord
•Warranty Card
•Quick Reference Guide
Unpacking
Instructions
Immediately upon receipt, carefully unpack this product and check the container to make
sure you have received all the parts indicated above in good condition.
Claims If the container or the material inside the container (this product
and any other accessory
included) appears damaged from shipping, or shows signs of mishandling, notify the
carrier immediately, not CHAUVET®, upon receipt of the damaged merchandise. Failure
to do so in a timely manner may invalidate your claim with the carrier. In addition, retain
the container and all the packing material for inspection.
For other issues such as missing components or parts, damage not re
lated to shipping,
or concealed damage, file a claim with CHAUVET®
within seven (7) days of receiving
the merchandise.
Text
Conventions
Convention
Meaning
1—512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected
Symbols
Symbol
Meaning
Critical installation, configuration, or operation information. Failure
to comply with this information may render the product partially or
completely inoperative, cause damage to the product, or cause
harm to the user.
Important installation or configuration information. Failure to
comply with this information may prevent the product from
functioning correctly.
Useful information.
Document
Information
The information and specifications contained in this document are subject to change
without notice. CHAUVET® assumes no responsibility or liability for any errors or
omissions that may appear in this manual.
CHAUVET® reserves the right to update the
existing document or to create a new document to correct any errors or omissions.
You can download the latest version of this document from www.chauvetlighting.com.
© Copyright 2013 CHAUVET®. All rights reserved.
Printed in P.R.C.
Electronically published by CHAUVET® in the U.S.A.
Author
Date
Editor
Date
A. Leon 06/14/13 T. Yeago 06/17/13

Page 4 of 15 Mini 4 Bar™ 2.0 User Manual Rev. 6
Product at a
Glance Use on Dimmer
x
Auto Programs
P
Outdoor Use
x
Auto-ranging Power Supply
P
Sound-Activated
P
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Master/Slave
P
Safety Notes Please read the following Safety Notes carefully before working with this product. They
include important safety information about its installation, usage, and maintenance.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Always disconnect this product from the power source before cleaning it or replacing
the fuse.
•Avoid direct eye exposure to the light source while the product is on.
•Make sure the power cord is not crimped or damaged.
•Never disconnect this product from power cord by pulling or tugging on the cord.
•If mounting this product overhead, always secure it to a fastening device using a
safety cable.
•Make sure there are no flammable materials close to the unit while operating.
•
Do not touch this product’s housing when operating because it may be very hot.
•Always make sure that the voltage of the outlet to which you are connecting this
product is within the range stated on the decal or rear panel of the product.
•This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose this product to rain or moisture.
•Always install this product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces.
•Be sure that no ventilation slots on the unit’s housing are blocked.
•Never connect this product to a dimmer.
•Make sure to replace the fuse with another of the same type and rating.
•Never carry this product from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
•The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this
product at higher temperatures.
•In the event of a serious operating problem, stop using the unit immediately.
•Never try to repair this product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
•Keep this User Manual for future consultation. If you sell this product to another user,
be sure that they also receive this document.

Mini 4 Bar™ 2.0 User Manual Rev. 6 Page 5 of 15
2.INTRODUCTION
Product Overview
Product Dimensions
Power Out
Power In
Microphone
Text here
Microphone Sensitivity Knob
Footswitch Input
LED Display
DMX In/Out

Page 6 of 15 Mini 4 Bar™ 2.0 User Manual Rev. 6
3.SETUP
AC Power This product has an auto-
ranging power supply and it can work with an input voltage
range of 100~240 VAC, 50/60 Hz.
To determine the power requirements for this product
(circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s back panel, or
refer to the product’s specifications chart. The listed current rating indicates the
product’s average current draw under normal conditions.
Always connect this product to a protected circuit
(circuit breaker or fuse),
making sure that it has
an appropriate electrical ground to avoid the risk of
electrocution or fire.
Never connect this product to
a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Fuse
Replacement Follow the instructions below to change the fuse, if necessary.
Disconnect this product from the power outlet before replacing the fuse.
1. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder and pry
out of its housing.
2. Remove the blown fuse from its holder and replace with a fuse of the exact
same type and rating.
3. Insert the fuse holder back into place, and reconnect power.
Although the safety cap does have room for a spare fuse, this product
ships with
no spare fuse.
Always replace a blown fuse of the same type and rating.
Installed fuse
(held by plastic clip)
Spare fuse holder
(inside safety cap)
Safety cap

Mini 4 Bar™ 2.0 User Manual Rev. 6 Page 7 of 15
Power Linking
This product provides power linking via the Edison outlet located in the back
of the unit.
Please see the diagram below for further explanation.
Power Linking Diagram
You can power link up to 18 Mini 4 Bar™ 2.0 units on 120 VAC or up to 32 Mini 4
Bar™ 2.0 units on 230 VAC.
The power linking diagram shown above corresponds to the North American
version of this product ONLY! If using this product
in other markets, you must
consult with the local CHAUVET® distributor as power linking connectors and
requirements may differ in your country or region.
1
st
Product
2
nd
Product
3
rd
Product
Other products

Page 8 of 15 Mini 4 Bar™ 2.0 User Manual Rev. 6
Mounting
Before mounting this product
, read and follow the safety recommendations indicated in
the Safety Notes section.
Orientation The Mini 4 Bar™ 2.0
may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
Rigging
This product has multiple rigging options. They are as follows:
•Floor Standing (using the two mounting/standing brackets)
•Hanging (using the two mounting/standing brackets)
•Hanging (using the two hanging clamp mounting points)
Before deciding on a location for this product
, always make sure that it will be easy to
access the unit for maintenance and programming purposes.
Make sure that the structure onto which you are mounting this product
can support its
weight. See the Technical Specifications for weight information.
When mounting this product overhead, always use a safety cable. Mount the product
securely to a rigging point, whether an elevated platform or a truss.
The bracket has a
13 mm hole, which is appropriate for this purpose.
When rigging this product onto a truss, you should use a mounting clamp
of appropriate
weight capacity.
When power linking multiple products, you must
always consider the length of the power
linking cable and mount the products close enough for the cable to reach.
Mounting Diagram
Tripod stand
adjustment knob
Pod tilt
adjustment (x8)
Pod pan
adjustment (x4)

Mini 4 Bar™ 2.0 User Manual Rev. 6 Page 9 of 15
4.OPERATION
Control Panel
Operation To access the control panel functions, use the four buttons
located underneath the
display. Please refer to the Product Overview (page 5
) to see the buttons location on the
control panel.
Button
Function
<MENU> Press to find an operation mode or to back out of the current menu
option
<DOWN>
Press to scroll down the list of options or to find a higher value
<UP>
Press to scroll up the list of options or to find a lower value
<ENTER> Press to select the value selected
Menu Map Mode Programming Steps Description
DMX 512 d. 1~d.512 Puts the fixture in DMX operating mode
and selects the DMX starting address
Sound-Active SND - Triggers the sound-active program to the
music, using the internal microphone
Automatic AUTO S 1~100 Selects one of the built in programs
Adjusts the speed of the automatic
program
Configuration
(DMX) Set this product in DMX mode to control it with a DMX controller.
1. Connect this product to a suitable power outlet.
2. Turn this product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX
input socket of this product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you
choose a starting address that is too high, you
could restrict the access to some of the product’s channels.
The Mini 4 Bar™ 2.0 uses up to 15 DMX channels in its 15-channel DMX mode, which
defines the highest configurable address to 498.
If you are not f
amiliar with DMX, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 512 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.

Page 10 of 15 Mini 4 Bar™ 2.0 User Manual Rev. 6
Configuration
(Standalone) Set this product in one of the standalonemodes to control it without a DMX controller.
1. Connect this product to a suitable power outlet.
2. Turn this product on.
Never connect a product
that is operating in any standalone mode, whether Static,
Automatic, or Sound to a DMX string connected to a DMX controller. This is
because product
s in standalone mode may transmit DMX signals that could
interfere with the DMX signals from the controller.
Sound-Active
Mode To enable the Sound Active mode, do the following:
1. Press <MENU> repeatedly until SND shows on the display.
2. Press <ENTER>.
3. Turn the music on and adjust the microphone sensitivity knob until the product
starts reacting to the beat of the music.
The product will only respond to low frequencies of music (bass and drums).
Automatic Mode
To enable the Automatic Mode, follow the instructions below:
1. Press <MENU> repeatedly until AUTO shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to adjust the duration of each step of the automatic
program from S__1 (fast) to S100 (slow).
4. Press <ENTER>.
Master/Slave
Mode This mode allows a single Mini 4 Bar™ 2.0
unit (the “master”) to control the actions of
one or more Mini 4 Bar™ 2.0
units (the “slaves”) without the need of a DMX controller.
The master unit will be set to operate in either Automatic or S
ound Active mode, while
the slave units will be set to operate in Slave Mode. Once set and connected, the slave
units will operate in unison with the master unit.
Configure the units as indicated below.
Slave units:
1. Press <MENU> repeatedly until 512 shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to “001”, as previously explained.
4. Connect the DMX input of the first slave unit to the DMX output of the master
unit.
5. Connect the DMX input of the subsequent slave units to the DMX output of the
previous slave unit.
6. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in either Automatic or Sound mode, as
previously indicated.
2. Make the master unit the first unit in the DMX daisy chain.
•Configure
all the slave units before connecting the master unit to the DMX
daisy chain.
•
Never connect a DMX controller to a DMX string configured for Master/Slave
operation because it may interfere with the signals from the master unit.
•Do not connect more than 31 slave units to the master unit.

Mini 4 Bar™ 2.0 User Manual Rev. 6 Page 11 of 15
Footswitch
Operation
The included footswitch provides quick access to the preset colors, color change
programs, and triggering via the onboard microphone on the Mini 4 Bar™ 2.0
. Please
see the chart, along with the set of instructions below for further explanation.
1. Power on the fixture.
2. Connect the footswitch to the Mini 4 Bar™ 2.0 via the 3-pin connection cable.
3. Press pedal #1 (Preset) to activate control. When this is operating properly, the
LEDs on the Mini 4 Bar™ 2.0 will light white (first function on pedal #1).
Pedal
Sub-option
Function
1
(Preset)
1 x press White
2 x press
Red
3 x press Green
4 x press Blue
5 x press Yellow
6 x press Magenta
7 x press Cyan
8 x press Color change every second in a
continuous loop
9 x press Color change every three seconds in a
continuous loop
2
(Blackout) 1 x press All LEDs off; press pedal 1 or pedals 1 &
2 to re-enter active modes
1 & 2
(Sound Active) Press both pedals
simultaneously Sound-active mode
There is no need to modify any settings for the Mini 4 Bar™ 2.0 before connecting
the footswitch. It will operate properly in any mode.
Plug the master fixture in LAST!
Disconnecting
the Footswitch In order to properly disconnect the footswitch, please follow these steps:
1. Unplug the footswitch from the Mini 4 Bar™ 2.0.
2. Turn the power to the fixture off (unplug the power cable).
3.
Turn the power to the fixture on again (plug in the power cable), and the fixture
will properly operate on any one of the 3 modes.

Page 12 of 15 Mini 4 Bar™ 2.0 User Manual Rev. 6
DMX Channel Assignments and Values
15-CH Channel Function Value Setting
1 Control/Operating Mode
000 ó009
RGB color mixing mode
010 ó029
Auto program 1
030 ó049
Auto program 2
050 ó069
Auto program 3
070 ó089
Auto program 4
090 ó109
Auto program 5
110 ó129
Auto program 6
130 ó149
Auto program 7
150 ó169
Auto program 8
170 ó189
Auto program 9
190 ó209
Auto program 10
210 ó229
Auto program 11
230
ó
249
Auto program 12
250 ó255
Sound-active Mode
2 Master Dimmer
000 ó000
No function
001 ó255
Dimmer (1~100%)
3 Master Strobe
000 ó009
No function
010 ó255
Strobe (Fast to Slow)
4
Red 1
000 ó255
0~100%
Color Mixing for Pod 1
5
Green 1
000 ó255
0~100%
6
Blue 1
000 ó255
0~100%
7
Red 2
000 ó255
0~100%
Color Mixing for Pod 2
8
Green 2
000 ó255
0~100%
9
Blue 2
000 ó255
0~100%
10
Red 3
000 ó255
0~100%
Color Mixing for Pod 3
11
Green 3
000 ó255
0~100%
12
Blue 3
000
ó
255
0~100%
13
Red 4
000 ó255
0~100%
Color Mixing for Pod 4
14
Green 4
000 ó255
0~100%
15
Blue 4
000 ó255
0~100%
3-CH Channel Function Value Setting
1
Red
000 ó255
0~100%
2
Green
000 ó255
0~100%
3
Blue
000 ó255
0~100%

Mini 4 Bar™ 2.0 User Manual Rev. 6 Page 13 of 15
5.TECHNICAL INFORMATION
Maintenance
Dust build up reduces light output performance and can cause overheating. This can
lead to reduction of the light source’s life.
To maintain optimum performance and
minimize wear, you should clean your lighting products at least twice a month. However,
be aware that usage and environmental conditions could be contributing factors to
increase the cleaning frequency.
To clean this product, follow the instructions below:
•Unplug the product from power.
•Wait until the product is at room temperature.
•Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
•Clean all glass/transparent surfaces with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
•Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
•Softly drag any dirt or grime to the outside of the glass/transparent surface.
•Gently polish the external optics and glass/transparent surfaces until they are free of
haze and lint.
Always dry the glass/transparent surfaces carefully after cleaning them.

Page 14 of 15 Mini 4 Bar™ 2.0 User Manual Rev. 6
6.TECHNICAL SPECIFICATIONS
Dimensions and
Weight
Length
Width
Height
Weight
1.8 in (46 mm)
8.5 in (215 mm)
35 in (889 mm)
8.2 lbs (3.7 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100~240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
52 W
57 W
Operating
0.4 A
0.2 A
Power linking current (units)
8A (18 units)
8A (32 units)
Fuse
F1A, 250 V
F1A, 250 V
Power I/O
U.S./Worldwide
UK/Europe
Power input connector
IEC
IEC
Power output connector
Edison
IEC
Power Cord plug
Edison (U.S.)
Local plug
Light Source
Type
Lifespan
LED
50,000 hours
Color
Quantity
Red
108
Green
108
Blue
108
Photo Optic
Parameter
Narrow Lenses
Illuminance @ 2 m
558 lux (per pod)
Beam angle
16º
Field angle
24º
Thermal
Maximum External Temp.
Cooling System
104° F (40° C)
Convection
DMX
I/O Connectors
Connector Type
Channel Range
3-pin XLR
Sockets
3 or 15
Ordering
Product Name
Item Code
Item Number
Mini 4 Bar™ 2.0
03030341
MINI4BAR2.0

Mini 4 Bar™ 2.0 User Manual Rev. 6 Page 15 of 15
Contact Us
If you live in the U.S., contact CHAUVET® World Headquarters.
If you live in the UK or Ireland, contact CHAUVET® Europe Ltd.
If you live in any other country, contact your distributor (see www.chauvetlighting.com for
distributor’s contact details.
World Headquarters
CHAUVET®
General Information
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice: [phone]
Fax: [phone]
Toll free: [phone]
United Kingdom & Ireland
CHAUVET® Europe Ltd.
General Information
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: [phone]
Fax: [phone]
Technical Support
Voice: [phone] (Press 4)
Fax: [phone]
Email: [e-mail]
Technical Support
Email: [e-mail]
World Wide Web
www.chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk
If you live outside the U.S., UK, or Ireland, contact your distributor and follow their
instructions on how to return CHAUVET® products to them. Visit
www.chauvetlighting.com for contact details.
Returning
Products to
CHAUVET®
Call the corresponding CHAUVET®
Tech Support office and request a Return
Merchandise Authorization (RMA) number before shipping the product. Be prepared to
provide the model number, serial number, and a brief description of the cause
for the
return.
You must send the merchandise prepaid, in its original box, and with its original packing
and accessories. CHAUVET® will not issue call tags.
Clearly label the package with the RMA number. CHAUVET®
will refuse any product
returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly
affixed label.
Before sending the product, clearly write
the following information on a piece of paper
and place it inside the box:
•Your name
•Your address
•Your phone number
•RMA number
•A brief description of the problem
Be sure to pack the product
properly. Any shipping damage resulting from inadequate
packaging will be your responsibility. FedEx packing or double-boxing are
recommended.
CHAUVET®
reserves the right to use its own discretion to repair or replace
returned product(s).