Chauvet Well Flex User manual

User Manual

Edition Notes
WELL™ Flex User Manual Rev. 1
Edition
Notes
The WELL™ Flex User Manual Rev. 1 covers the description, safety precautions, installation,
programming, operation, and maintenance of the WELL™ Flex. Chauvet released this edition of
the WELL™ Flex User Manual in February 2015.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted
triangle, and all other trademarks in this manual pertaining to services, products, or marketing
statements (example: It’s Green Thinking™) are owned or licensed by Chauvet
. Any other
product names, logos, brands, company names, and other trademarks featured or referred to
within this document are the property of their respective trademark holders.
Copyright Notice
Chauvet owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2015 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information
purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification,
or printing of this manual or its content for any other purpose
without written consent from
Chauvet.
Document
Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or maintaining this product should completely
read through the guide that shipped with the product, as well as this manual, before installing,
operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects.
However, Chauvet assumes no responsibility for any errors or omissions in this document.
Chauvet reserves the right to revise and make changes to the content of this document without
obligation that Chauvet notify any person or company of such revision or changes. This does
not in any way constitute a commitment by Chauvet to make such changes. Chauvet may issue
a revision of this manual or a new edition to incorporate such changes.
Document
Revision
The WELL™ Flex User Manual Rev. 1 is the first edition of this manual. Go to
www.chauvetprofessional.com for the latest version.
Author
Date
Editor
Date
D. Couppe
2/5/15
A. Leon
2/6/15

Table of Contents
WELL™ Flex User Manual Rev. 1 -i-
Table of Contents
1. Before You Begin......................................................................................................................................1
What Is Included...........................................................................................................................................................1
Claims..........................................................................................................................................................................................1
Manual Conventions ....................................................................................................................................................................1
Symbols.......................................................................................................................................................................................1
Product At A Glance .....................................................................................................................................................2
Safety Notes .................................................................................................................................................................2
Personal Safety............................................................................................................................................................................2
Mounting And Rigging..................................................................................................................................................................2
Power And Wiring ........................................................................................................................................................................2
Operation.....................................................................................................................................................................................2
Expected LED Lifespan................................................................................................................................................2
2. Introduction...............................................................................................................................................3
Description....................................................................................................................................................................3
Features........................................................................................................................................................................3
Overview.......................................................................................................................................................................4
Dimensions...................................................................................................................................................................5
3. Setup..........................................................................................................................................................6
AC Power......................................................................................................................................................................6
AC Plug........................................................................................................................................................................................6
Battery Charge Notes...................................................................................................................................................................6
Replacing the Fuse......................................................................................................................................................................6
DMX Linking..................................................................................................................................................................7
DMX Personalities........................................................................................................................................................................7
Master/Slave Connectivity............................................................................................................................................................7
Wireless Operation .......................................................................................................................................................8
Initial Setup..................................................................................................................................................................................8
Configuration................................................................................................................................................................................8
Product Pairing.............................................................................................................................................................................8
Storage Notes..............................................................................................................................................................................8
WDMX™ Setup............................................................................................................................................................................8
Mounting.......................................................................................................................................................................9
Orientation ...................................................................................................................................................................................9
Rigging.........................................................................................................................................................................................9
Procedure ....................................................................................................................................................................................9
4. Operation.................................................................................................................................................10
Control Panel Description...........................................................................................................................................10
Control Options...........................................................................................................................................................10
Programming ..............................................................................................................................................................10
Zoom Adjustment.......................................................................................................................................................................10
Tilt Adjustment...........................................................................................................................................................................10
Menu Map...................................................................................................................................................................11
Menu Map (Cont.).......................................................................................................................................................12
Configuration (Standalone).........................................................................................................................................13
Automatic Programs...................................................................................................................................................................13
Fixed Static Color.......................................................................................................................................................................13
Manual Static Color....................................................................................................................................................................13
Master/Slave..............................................................................................................................................................................13
Dimmer Profiles..........................................................................................................................................................................14
White Calibration........................................................................................................................................................................14
Backlight ....................................................................................................................................................................................14
Software Information..................................................................................................................................................................14
Fixture Hours..............................................................................................................................................................................14

Table of Contents
-ii- WELL™ Flex User Manual Rev. 1
LED Test....................................................................................................................................................................................14
Configuration (DMX)...................................................................................................................................................15
DMX Personalities......................................................................................................................................................................15
DMX Control...............................................................................................................................................................................15
Wireless Settings .......................................................................................................................................................................15
DMX Values................................................................................................................................................................16
DMX Values (Cont.)....................................................................................................................................................17
5. Technical Information.............................................................................................................................18
Product Maintenance..................................................................................................................................................18
6. Technical Specifications.........................................................................................................................19
Returns .......................................................................................................................................................................20
Contact Us...................................................................................................................................................21

Before You Begin
WELL™ Flex User Manual Rev. 1 -1-
1. BEFORE YOU BEGIN
What Is
Included
•WELL™ Flex (Six-pack charging case or single product)
•Neutrik® powerCON® power cord
•Rubber plug (for each product)
•Omega bracket with mounting hardware (for each product)
•Warranty Card
•Quick Reference Guide
Claims
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not Chauvet
. Failure to
report damage to the carrier immediately may invalidate your claim. In
addition, keep the box
and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with Chauvet within 7 days of delivery.
Manual
Conventions
Convention Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU>Settings
A sequence of menu options
1–10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Symbols Meaning
Critical installation, configuration, or operation information. Failure to
comply with this information may cause the product not to work,
damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply
with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

Before You Begin
-2- WELL™ Flex User Manual Rev. 1
Product At A
Glance
Use on Dimmer
x
Auto Programs
P
Temporary Outdoor Use
P
Auto-Ranging Power
Supply
P
Master/Slave
P
Replaceable
Fuse/Breaker
P
DMX
P
User-Serviceable
x
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained Chauvet certified technicians. Do not open the
housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
•Avoid direct eye exposure to the light source while the product is on.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
Mounting And
Rigging
•The product is not intended for permanent outdoor installation.
•The product is rated IP44 and should only be used in environments meeting that criteria.
•CAUTION: When transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal electronics of the
product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
•Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•Make sure there are no flammable materials close to this product while it is operating.
•Only use the hanging/mounting bracket or the handle to carry this product. Do not carry by
the moving head.
•When hanging this product, always secure to a fastening device using a safety cable.
Power And
Wiring
•Always make sure you are connecting this product to the proper voltage in accordance with
the specifications in this manual or on the product’s specification label.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
•Never connect this product to a dimmer pack or rheostat.
•Never disconnect this product by pulling or tugging on the power cable.
Operation
•Do not operate this product if you see damage on the housing, lenses, or cables. Have the
damaged parts replaced by an authorized technician at once.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Chauvet product may require service, contact Chauvet
Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters,
LEDs exhibit higher operating temperatures than in ideal, single-
LED conditions. For this
reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs’ lifespan.
Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If extending this lifespan
is vital, lower the operating temperature by improving the ventilation around the product and
reducing the ambient temperature to an optimal operating range. In addition, limiting the overall
projection intensity may also help to extend the LEDs’ lifespan.

Introduction
WELL™ Flex User Manual Rev. 1 -3-
2. INTRODUCTION
Description
The WELL™ Flex is a 4- LED (quad-color RGBW) battery-powered wash product. It includes a
lightweight body, tough frame, quick charging time, and endurance battery. The WELL™ Flex
runs on a 12 V battery capable of running for over 12 consecutive hours. The 5-
pin DMX in and
out ports come standard, as well as a pre-installed Wireless Solutions W-
DMX™ receiver.
WELL™ Flex is also available in a 6-pack road case that doubles as the WELL™ Flex
charging
base.
Features
•3-, 4-, 6- or 10-channel quad-color LED wash product
•Operating modes:
•3-channel: HSI control
•3-channel: HSV control
•4-channel: RGBW
•6-channel: RGBW, dimmer, strobe
•10-channel: RGBW, dimmer, strobe, color macro/white balance, auto programs,
dimmer speed, auto speed
•Simple and complex DMX channel profiles for programming versatility
•Four (4) dimming modes for versatility
•Quick 8-hour charging time for frequent use
•5-pin DMX input/output connections
•Neutrik® powerCON® power input connector
•RGBW color mixing via DMX, W-DMX™, or manually
•Built-in auto programs recalled via DMX and Master/Slave

Introduction
-4- WELL™ Flex User Manual Rev. 1
Overview
Front View
Rear View
Side View
LED
Zoom Adjustment
Control Panel
Power/Data
Access
Panel
Handle
Mounting
Plate
Case Charger Input
Rubber feet

Introduction
WELL™ Flex User Manual Rev. 1 -5-
Dimensions
12.28 in
312 mm
4.25 in
108 mm
9.85 in
250 mm
7.84 in
199 mm

Setup
-6- WELL™ Flex User Manual Rev. 1
3. SETUP
AC Power
Each WELL™ Flex has an auto-ranging battery charger, whether stand-alone or inside the flight
case that works with an input voltage range of 100 to 240 VAC,
50/60 Hz. To determine the
power requirements for each WELL™ Flex, refer to the label affixed to the product. You can
also refer to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the Chauvet website
:
http://www.chauvetlighting.com/download/.
Always connect this product to a protected circuit with an appropriate electrical ground
to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The WELL™ Flex comes with a power input cord terminated with a Neutrik® powerCON® A
connector on one end and an Edison plug on the other end (U.S. market). If the power input
cord that came with your product has no plug, or if you need to change the Edison plug, use the
table below to wire the new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Battery Charge
Notes
•Recharge the battery within three days from last use.
•Recharge the battery to full capacity before storing this product.
•For best results, charge the battery in a temperature between 32 ºF (0 ºC) and
95 ºF (35 ºC).
•When charging the battery, keep the product at no less than 1 m from any open flame or
hot plate.
•When charging the battery inside the road case charger, keep the road case’s cover open.
•Always charge the battery with the product in an upright position.
•Do not charge the battery for more than 24 hours.
•Perform a full discharge/recharge cycle every three months.
Be sure to remove rubber plug from the bottom of the product before charging in the
road case.
Replacing the
Fuse
The WELL™ Flex has no external fuse. However, the road case charger comes with a
replaceable fuse.
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.

Setup
WELL™ Flex User Manual Rev. 1 -7-
DMX Linking
You can link the WELL™ Flex to a DMX controller using a 5-pin DMX connection. If using other
DMX-compatible products with the WELL™ Flex, you can control each individually with a single
DMX controller.
DMX
Personalities
The WELL™ Flex uses a 5-pin DMX data connection for the 3-, 4-, 6- and 10-channel DMX
personalities.
•Refer to the Introduction chapter for a brief description of each DMX personality.
•Refer to the Operation chapter to learn how to configure the WELL™ Flex to work in these
personalities.
•The DMX Values section provides you with detailed information regarding the DMX
personalities.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller,
download the DMX Primer from the Chauvet website:
http://www.chauvetlighting.com/download/.
Master/Slave
Connectivity
The Master/Slave mode allows a WELL™ Flex (the master) to control one or more WELL™
Flex’s (the slaves) without a DMX controller. One WELL™ Flex becomes the master whe
n
running an auto program, or by being in a Static mode.
You must configure each slave’s control panel to operate in Slave mode. During Master/Slave
operation, the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master.
•
Master/Slave mode not available in wireless operation.
•The Operation section of this manual provides detailed instructions on how to
configure the master and slaves.

Setup
-8- WELL™ Flex User Manual Rev. 1
Wireless
Operation
The WELL™ Flex can operate in W-DMX™ mode up to 50 m (164 ft) from the
W-DMX™ transmitter. The W-DMX™ receiver in the WELL™ Flex must
be paired with the
W-DMX™ transmitter for wireless operation.
Initial Setup
1. Turn the W-DMX™ transmitter on.
2. Connect the W-DMX™ transmitter to a DMX controller.
3. Place the WELL™ Flex within 50 m from the W-DMX™ transmitter.
4. Disconnect any DMX cable from the WELL™ Flex.
5. Turn the WELL™ Flex on.
Configuration
1. From the WELL™ Flex’s control panel, go to DMX Address.
2. Select the start address, as with any other DMX compatible product.
3. Go to Wireless Setting > Receive.
4. Select On. (The Signal Strength Indicator will show a ?in front of the bars)
5. Press the reset button on the W-DMX™ transmitter. (The Signal Strength Indicator on the
WELL™ Flex will show a ϟin front of the bars for 3 seconds while a connection is
established.)
Product Pairing
If the WELL™ Flex has already been paired with the W-DMX™ transmitter, the Signal Strength
Indicator in the middle of the LCD screen will show the strength of the signal. In this case, the
WELL™ Flex is ready to work in Wireless mode.
Pairing the WELL™ Flex and a new W-DMX™ transmitter:
1. From the WELL™ Flex’s control panel, go to Wireless Setting.
2. Select Reset. The Signal Strength Indicator on the WELL™ Flex will show a ?in front of the
bars.
3. From the W-DMX™ transmitter, press <RESET> (the Signal Indicator on the transmitter will
flash).
4. Once the transmitter has found the WELL™ Flex, the Signal indicator on the W-DMX™
transmitter will illuminate solid.
5. The Signal Strength Indicator in the middle of the LCD screen on the WELL™ Flex will
show the strength of the signal.
Storage Notes
•Recharge the battery to full capacity before storing the product.
•Store charged product(s) in a dry environment, away from direct sunlight.
W-DMX™ operation can be interrupted or inhibited by liquid masses between the
transmitter and receiver such as water, snow, or people. For best results, keep the area
between the transmitter and receiver clear of any liquid mass.
W-DMX™ Setup
Control Panel
W-DMX™ Transmitter

Setup
WELL™ Flex User Manual Rev. 1 -9-
Mounting
Before mounting this product, read and follow the Safety Notes. For our CHAUVET®
Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•The product is not intended for permanent outdoor installation.
•Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
•Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product. (IP44)
•If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
•When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET® Professional line of safety cables, go to http://trusst.com/products/.
Procedure
The WELL™ Flex comes with preinstalled mounting to which you will be able to attach the
included omega bracket. Use one mounting point per product. In addition, use a safety cable to
link the product to the structure. You must supply your own mounting clamps. Make sure the
clamps are capable of supporting the weight of this product. Use at least one mounting point per
product. For our Chauvet line of mounting clamps, go to http://trusst.com/products/.
You may
also choose to simply set the WELL™ Flex on the floor using the rubber feet on the bottom of
the product
Mounting Diagram
When using only one mounting clamp, be sure to use a clamp with a captive bolt to
prevent accidental loosening.
Floor Mounting
Overhead Mounting
Clamp
Omega
Bracket

Operation
-10- WELL™ Flex User Manual Rev. 1
4. OPERATION
Control Panel
Description
Button
Function
<ON/OFF>
Press and hold to turn product on or off
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently selected
value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric
value when in a function
<DOWN>
Navigates downward through the menu list or decreases the numeric
value when in a function
Control
Options
You can set the WELL™ Flex starting address in the 001–512 DMX range. This enables control
of up to 51 products in the 10-channel 10Ch personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level
and a variable number of programming levels for each option.
•To go to the desired main level, press <MENU> repeatedly until the option shows on the
display. Press <ENTER> to select. This will take you to the first programming level for that
option.
•To select an option or value within the current programming level, press <UP> or <DOWN>
until the option shows on the display. Press <ENTER> to select. In this case, if there is
another programming level, you will see that first option, or you will see the selected value.
•Press <MENU> repeatedly to exit to the previous main level.
Zoom
Adjustment
You can manually adjust the zoom angle of the WELL™ Flex by adjusting the knob on the back
of the head. Turning the knob clockwise will narrow the beam while turning the knob counter
clockwise will widen the beam.
Tilt Adjustment
The head of the WELL™ Flex can be manually adjusted up to 220°.
Procedure
220°
Zoom
Adjustment
22° to 31°

Operation
WELL™ Flex User Manual Rev. 1 -11-
Menu Map
Main Level Programming Levels Description
Auto Show
Auto 0–4
Speed
0–100
Automatic programs and speed
Static
Fixed Color
R
Red
G
Green
B
Blue
W
White
GB
Green/Blue
RB
Red/Blue
RG
Red/Green
RGB
Red/Green/Blue
RW
Red/White
GW
Green/White
BW
Blue/White
RGW
Red/Green/White
RBW
Red/Blue/White
GBW
Green/Blue/White
RGBW
Red/Green/Blue/White
Manual
Color
R
Value 0–255 Combines red, green, blue, and white to make
a custom color (0–100%)
G
B
W
Dimmer Mode
Off
No dimmer
Dimmer 1–3
Dimming curves Dimmer 1 (fast) to Dimmer 3
(slow)
Back Light
10S
Turns off display backlight after 10 sec of
inactivity
20S
Turns off display backlight after 20 sec of
inactivity
30S
Turns off display backlight after 30 sec of
inactivity
On
Display backlight always on
Information
Test
Turns on all LEDs in sequence for testing
Fixture Hours
Shows total product hours
Version
Shows installed software version

Operation
-12- WELL™ Flex User Manual Rev. 1
Menu Map (Cont.)
Main Level Programming Levels Description
DMX Address 001–512
Selects DMX address (highest channel
restricted to personality chosen)
DMX Channel
4 Ch
4-channel: RGBW control
6 Ch
6-channel: RGBW control, dimmer, and strobe
10Ch
10-channel: RGBW control, dimmer, strobe,
color macro/white balance, auto programs,
auto speed, dimmer speed
HSV
3-channel: HSV control
HSI
3-channel: HSI control
Master/Slave Mode
Master
DMX mode (Master)
Slave
Slave mode
Wireless Setting Receive
On
Turns wireless DMX function on/off
Off
Reset
Resets the wireless setting
White Balance Balance
R
Value 125–255
Sets red LED maximum value
G
Sets green LED maximum value
B
Sets blue LED maximum value

Operation
WELL™ Flex User Manual Rev. 1 -13-
Configuration
(Standalone)
Use standalone configuration to operate the product without a DMX controller.
Automatic
Programs
Automatic programs allow for dynamic RGBW color mixing without a DMX controller.
1. Go to the Auto Show main level.
2. Select the desired automatic (Auto 0–4) program.
3. Go to the Speed programming level.
4. Select the desired speed 0–100.
You cannot edit any of the automatic programs (Auto 0–4).
Fixed Static
Color
The fixed static color mode allows for preset RGBW color mixing without a DMX controller.
1. Go to the Static main level.
2. Select the Fixed Color programming level.
3. Select the desired color combination. See Menu Map.
Manual Static
Color
The manual static color mode allows for manually customizable RGBW color mixing without a
DMX controller.
1. Go to the Static main level.
2. Select the Manual Color programming level.
3. Select the desired color R, G, Bor W.
4. Go to the Value programming option.
5. Select the desired color value 0–255 (0–100%).
6. Repeat for the other colors.
Master/Slave
The Master/Slave mode allows a group of WELL™ Flex’s (the slaves) to simultaneously
duplicate the output of another WELL™ Flex (the master) without a DMX controller.
1. Set each of the slaves:
a. Go to the Master/Slave Mode main level.
b. Select Slave.
2. Set the master:
a. Go to the Master/Slave Mode main level.
b. Select Master.
c. Select an automatic program as explained in Automatic Programs, or a static mix of
colors as explained in Fixed Static Color or Manual Static Color.
•The master is the one that runs a program whether in automatic programs, fixed
static color or manual static color modes.
•Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
•The master should be the first product in the daisy chain.

Operation
-14- WELL™ Flex User Manual Rev. 1
Dimmer Profiles
This setting determines how fast the output of the WELL™ Flex changes when you modify the
values of the red, green, blue, white, and dimmer faders. This setting provides three different
options to simulate the dimming curve of an incandescent lighting product.
1. Go to the Dimmer Mode main level.
2. Select a dimmer profile (Off, Dimmer 1, Dimmer 2, or Dimmer 3).
OFF:
The output is proportional (linear) to the dimmer and RGBW channel values.
Dimmer 1–3:
The output follows the dimmer and RGBW channel values based on the
corresponding dimmer curve, Dimmer 1being the fastest and Dimmer 3 the
slowest.
White Calibration
This setting allows you to select the white color shown by the WELL™ Flex when the DMX
controller’s red, green, and blue faders are set to 255.
1. Go to the White Balance main level.
2. Go to Balance.
3. Select a color (R, G, or B).
4. Go to Value.
5. Select a color value (125–255).
6. Repeat for the other colors.
When selecting White Balance, you will only be able to define the values of red (R),
green (G), and blue (B).
The values of red (R), green (G), and blue (B) configured from White Balance will define
the color temperature shown when the RGB faders are set to 255.
Backlight
This setting allows you to set the amount of time the backlight on the
WELL™ Flex’s display stays on after the last button is pressed on the control panel.
1. Go to the BackLite main level.
2. Select On (remains on), 10S (10 seconds), 20S (20 seconds), or 30S (seconds).
Software
Information
This option shows what version of software the WELL™ Flex is running.
1. Go to the Information main level.
2. Select Version and the version number will show on the display.
Fixture Hours
This option shows the total amount of hours the WELL™ Flex has been turned on.
1. Go to the Information main level.
2. Select Fixture Hours and the total number of hours will show on the display.
LED Test
This option runs a check of the LEDs on the WELL™ Flex by turning on all the LEDs in
sequence.
1. Go to the Information main level.
2. Select Test programming level.

Operation
WELL™ Flex User Manual Rev. 1 -15-
Configuration
(DMX)
Use DMX configurations to operate the product with a DMX controller.
DMX
Personalities
This setting allows you to choose a particular DMX personality.
1. Go to the DMX Channel main level.
2. Select the desired personality (4 Ch, 6 Ch, 10Ch, HSI, or HSV).
•See the DMX Values section for the highest starting address you can select for each
personality.
•Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
DMX Control
In this mode, each product will respond to a unique starting address from the DMX controller. All
products with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Personalities.
2. Set the starting address:
a. Go to DMX Address main level.
b. Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
DMX Personality DMX Address
4 Ch
509
6 Ch
507
10Ch
503
HSI
510
HSV
510
Wireless Settings
This mode allows you to control DMX wirelessly. For detailed setup of this feature see Wireless
Operation. To disable this feature:
1. Go to Wireless Setting > Receive.
2. Select Off.

Operation
-16- WELL™ Flex User Manual Rev. 1
DMX Values
10Ch
Channel Function Value Percent/Setting
1
Dimmer
000 ó255
0–100%
2
Red
000 ó255
0–100%
3
Green
000 ó255
0–100%
4
Blue
000 ó255
0–100%
5
White
000 ó255
0–100%
6 Strobe
000
ó
010
011 ó255
No function
Slow to fast
7 Color Macro + White
Balance
000 ó010
011 ó030
031 ó050
051 ó070
071 ó090
091 ó110
111 ó130
131 ó150
151 ó170
171 ó200
201 ó205
206 ó210
211 ó215
216 ó220
221 ó225
226 ó230
231 ó235
236 ó240
241 ó245
246 ó250
251 ó255
No function
R: 100% G: 0–100% B: 0
R: 100%–0 G: 100% B: 0
R: 0 G: 100% B: 0–100%
R: 0 G: 100%–0 B: 100%
R: 0–100% G: 0 B: 100%
R: 100% G: 0 B: 100%–0
R: 100% G: 0–100% B: 0–100%
R: 100%–0 G: 100%–0 B: 100%
R: 100% G: 100% B: 100% W: 100%
White 1
White 2
White 3
White 4
White 5
White 6
White 7
White 8
White 9
White 10
White 11
8 Auto Programs
000 ó051
052 ó101
102 ó152
153 ó203
204 ó254
255
No function
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
9
Auto Speed
000 ó255
Slow to fast
10 Dimmer Speed
000 ó051
052 ó101
102 ó152
153 ó203
204
ó
255
Preset dimmer speed from display menu
Linear dimmer
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nonlinear dimming curve 3 (slowest)