Chauvet SlimBANK TRI-18 User manual

User Manual

Page 2 of 19 SlimBANK™ TRI-18 User Manual
TABLE OF CONTENTS
1. Before You Begin...........................................................................................................3
What Is Included .........................................................................................................................3
Unpacking Instructions................................................................................................................3
Claims.................................................................................................................................................3
Text Conventions ........................................................................................................................3
Symbols......................................................................................................................................3
Disclaimer...................................................................................................................................3
Product at a Glance.....................................................................................................................4
Safety Notes ...............................................................................................................................4
2. Introduction....................................................................................................................5
Overview.....................................................................................................................................5
Dimensions.................................................................................................................................6
3. Setup...............................................................................................................................7
AC Power....................................................................................................................................7
Fuse Replacement...............................................................................................................................7
Power Linking......................................................................................................................................8
Mounting.....................................................................................................................................9
Orientation...........................................................................................................................................9
Rigging................................................................................................................................................9
4. Operation......................................................................................................................10
Control Panel Operation............................................................................................................10
Menu Map.................................................................................................................................10
Configuration (DMX)..................................................................................................................11
DMX Personalities and Starting Address.............................................................................................11
SlimBANK™ TRI-18 Sections for DMX Control..........................................................................11
DMX Channel Modes, Assignments, and Values.......................................................................12
13-Channel........................................................................................................................................12
9-Channel..........................................................................................................................................13
5-Channel..........................................................................................................................................13
3-Channel..........................................................................................................................................13
Configuration (Standalone)........................................................................................................14
Sound-Active Mode............................................................................................................................14
Sound Sensitivity ...............................................................................................................................14
Auto Program.....................................................................................................................................14
Program Speed..................................................................................................................................14
Static Colors......................................................................................................................................15
Custom Color Mixing..........................................................................................................................15
Selecting the Dimmer Mode ...............................................................................................................15
Temperature Display..........................................................................................................................15
Master/Slave Mode............................................................................................................................16
5. Technical Information..................................................................................................17
Product Maintenance ................................................................................................................17
6. Technical Specifications..............................................................................................18
Returns.....................................................................................................................................19
Contact Us................................................................................................................................19

SlimBANK™ TRI-18 User Manual Page 3 of 19
1.BEFORE YOU BEGIN
What Is
Included
•SlimBANK™ TRI-18
•Power cord
•Hanging bracket with mounting
hardware
•Barn doors
•Warranty card
•Quick Reference Guide
Unpacking
Instructions
Carefully unpack the product immediately and check the container to make sure all the
parts are in the package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from
shipping, or show signs of mishandling, notify the carrier immediately, not CHAUVET®.
Failure to report damage to the carrier immediately may invalidate your claim. In
addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping,
or concealed damage, file a claim with CHAUVET® within 7 days of delivery.
Text
Conventions
Convention Meaning
1 to 512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected
Symbols
Symbol Meaning
Critical installation, configuration, or operation information. Not
following these instructions may make the product not work, cause
damage to the product, or cause harm to the operator.
Important installation or configuration information. The product
may not function correctly if this information is not used.
Useful information.
Disclaimer
The information and specifications contained in this user manual are subject to change
without notice. CHAUVET® assumes no responsibility or liability for any errors or
omissions, and reserves the right to revise or recreate this manual at any time.
Download the latest version from www.chauvetlighting.com.
© Copyright 2013 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Author
Date
Editor
Date
A. Leon 08/06/13 T. Yeago 08/06/13

Page 4 of 19 SlimBANK™ TRI-18 User Manual
Product at a
Glance
Use on Dimmer
x
Auto Programs
P
Outdoor Use
x
Auto-ranging Power Supply
P
Sound-Activated
P
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Master/Slave
P
Safety Notes
These notes include important information about the mounting, usage, and maintenance
of this product; read before using the product.
•Always connect the product to a grounded circuit to avoid the risk of electrocution.
•Always disconnect the product from the power source before cleaning or replacing
the fuse.
•Avoid direct eye exposure to the light source while the product is on.
•Make sure the power cord is not crimped or damaged.
•Never disconnect the product from power by pulling or tugging on the cord.
•If mounting the product overhead, always secure to a fastening device using a
safety cable.
•
Make sure there are no flammable materials close to the product when operating.
•Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
•The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
•Always install the product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
•Be sure that no ventilation slots on the product’s housing are blocked.
•Never connect the product to a dimmer.
•Make sure to replace the fuse with another of the same type and rating.
•Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket.
•The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the
product at higher temperatures.
•In the event of a serious operating problem, stop using the product immediately.
•Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Contact the nearest authorized technical assistance center.
•This product is not intended for permanent installation.
•Keep this user manual for future use. If you sell the product to another user, be sure
to give this document to the next owner.

SlimBANK™ TRI-18 User Manual Page 5 of 19
2.INTRODUCTION
Overview
Back Panel View
Power
In
Fuse Holder
Menu Buttons
DMX Out
DMX In
Power Out
Microphone
Display
Safety
Loop

Page 6 of 19 SlimBANK™ TRI-18 User Manual
Dimensions
15.3 in
389 mm
7.4 in
187 mm
7.7 in
197 mm

SlimBANK™ TRI-18 User Manual Page 7 of 19
3.SETUP
AC Power
The SlimBANK™ TRI-18 has an auto-ranging power supply and it can work with an
input voltage range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s back panel, or
refer to the product’s specifications chart. The listed current rating indicates the
product’s average current draw under normal conditions.
Always connect the product to a protected circuit (circuit breaker or fuse). Make
sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Fuse
Replacement
Disconnect the product from power before replacing the fuse.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder.
5. Replace with a fuse of the exact same type and rating.
6. Insert the fuse holder back in place and reconnect power.
A spare fuse is not included; however, the safety cap has room for a spare.
Always replace a blown fuse with another of the same type and rating.
Installed fuse
(held by plastic clip)
Spare fuse holder
(inside safety cap)
Safety cap

Page 8 of 19 SlimBANK™ TRI-18 User Manual
Power Linking
The product provides power linking via the Edison/IEC outlet located in the front/back of
the unit.
Power Linking
Diagram
You can power link up to 9 SlimBANK™ TRI-18 units on 120 VAC or up to
16 SlimBANK™ TRI-18 units on 230 VAC.
The power linking diagram shown above corresponds to the North American version of
the product ONLY! If using the product in other markets, you must consult with the local
CHAUVET® distributor as power linking connectors and requirements may differ in your
country or region.
1st Product
2nd Product
3rd Product
Additional Products

SlimBANK™ TRI-18 User Manual Page 9 of 19
Mounting
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
Orientation
The SlimBANK™ TRI-18 may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
Rigging
•Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
•Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight (see the Technical Specifications).
•When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
•When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13-mm holes, which are appropriate
for this purpose.
•When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
•The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
•The double-bracketed yoke also serves as floor supports. When mounting the
product on the floor, make sure that the product and cables are away from people
and vehicles.
Mounting Diagram
Double-Bracketed
Yoke
Mounting Clamps
Bracket
Adjustment
Knobs
Safety Cable
Overhead Mount
Floor Mount

Page 10 of 19 SlimBANK™ TRI-18 User Manual
4.OPERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display.
Button Function
<MENU> Selects an operation mode or backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
<DOWN>
Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
Menu Map
Mode
Programming Steps
Description
DMX
Personalities
and Starting
Address
3-CH
d1—d512 Selects DMX personality and
starting address
5-CH
9-CH
13CH
Static Colors C--
r Red
g
Green
b
Blue
gb Cyan
r b Magenta
rg Yellow
rgb
White
Auto Program P-- P 1—P 14 Selects auto program
Program Speed S-- S 1—S100 Selects auto program speed (slow to fast)
Sound-Active
Mode Snd Sound-Active mode
Sound
Sensitivity
SenS u 0—u100 Sound sensitivity control
Custom Color
Mixing U-- r 0—r255 Red (0 to 100%)
g 0—g255
Green (0 to 100%)
b 0—b255
Blue (0 to 100%)
Dimmer dIM
OFF
Dimmer, speed off
dIM1 Dimmer, fast speed
dIM2
Dimmer, middle speed
dIM3 Dimmer, slow speed
Temperature tEMP Displays temperature of LEDs

SlimBANK™ TRI-18 User Manual Page 11 of 19
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
DMX
Personalities and
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The SlimBANK™ TRI-18 uses up to 13 DMX channels in its 13-channel DMX personality,
which defines the highest configurable address to 500.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.
To select the DMX personality and starting address, do the following:
1. Press <MENU> repeatedly until 3-CH (3-channel mode), 5-CH (5-channel mode),
9-CH (9-channel mode), or 13CH (13-channel mode) shows on the display.
2. Press <ENTER> and d 1—d512 shows on the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
SlimBANK™ TRI-18 Sections for DMX Control
Section 1 Section 2 Section 3

Page 12 of 19 SlimBANK™ TRI-18 User Manual
DMX Channel Modes, Assignments, and Values
13-Channel
Channel Function Value Setting
1
Red
000 ó255
0 to 100%
Section 1
2
Green
000 ó255
0 to 100%
3
Blue
000 ó255
0 to 100%
4
Red
000
ó
255
0 to 100%
Section 2
5
Green
000 ó255
0 to 100%
6
Blue
000 ó255
0 to 100%
7
Red
000 ó255
0 to 100%
Section 3
8
Green
000 ó255
0 to 100%
9
Blue
000 ó255
0 to 100%
10 Auto Programs
000 ó010
011 ó028
029 ó045
046 ó062
063 ó079
080 ó096
097 ó113
114 ó130
131 ó147
148 ó164
165 ó181
182 ó198
199 ó215
216 ó232
233 ó250
251 ó255
No function
Chase 1
Chase 2
Chase 3
Chase 4
Chase 5
Chase 6
Chase 7
Chase 8
Chase 9
Chase 10
Chase 11
Chase 12
Chase 13
Chase 14 (randomChases 1—13)
Sound-Active mode
11
Speed
000 ó255
Auto programs speed (slow to fast)
12
Dimmer
000 ó255
0 to 100%
13 Shutter
000
ó
010
011 ó255
No function
Strobe (slow to fast)

SlimBANK™ TRI-18 User Manual Page 13 of 19
9-Channel
Channel Function Value Setting
1
Dimmer
000 ó255
0 to 100%
2
Red
000 ó255
0 to 100%
3
Green
000 ó255
0 to 100%
4
Blue
000 ó255
0 to 100%
5 Shutter
000
ó
010
011 ó255
No function
Strobe (slow to fast)
6 Custom Color and
Color Temperature
000 ó010
011 ó030
031 ó050
051 ó070
071 ó090
091 ó110
111 ó130
131 ó150
151 ó170
171 ó200
201 ó205
206 ó210
211 ó215
216 ó220
221 ó225
226 ó230
231 ó235
236 ó240
241 ó245
246 ó250
251 ó255
No function
Red 100% + Green 0 to 100%
Red 100% to 0 + Green 100%
Green 100% + Blue 0 to 100%
Green 100% to 0 + Blue 100%
Red 0 to 100% + Blue 100%
Red 100% + Blue 100% to 0
Red 100% + Green 0 to 100% + Blue 0 to 100%
Red 100% to 0 + Green 100% to 0 + Blue 100%
Red 100% + Green 100% + Blue 100%
Color temperature 1
Color temperature 2
Color temperature 3
Color temperature 4
Color temperature 5
Color temperature 6
Color temperature 7
Color temperature 8
Color temperature 9
Color temperature 10
Color temperature 11
7 Auto Programs
000 ó010
011 ó028
029 ó045
046 ó062
063 ó079
080 ó096
097 ó113
114 ó130
131 ó147
148 ó164
165 ó181
182 ó198
199 ó215
216 ó232
233 ó250
251 ó255
No function
Chase 1
Chase 2
Chase 3
Chase 4
Chase 5
Chase 6
Chase 7
Chase 8
Chase 9
Chase 10
Chase 11
Chase 12
Chase 13
Chase 14 (random Chases 1 to 13)
Sound-Active mode
8
Speed
000 ó255
Auto programs speed (slow to fast)
9 Dimmer Mode
000 ó051
052 ó101
102 ó152
153 ó203
204 ó255
Dimmer mode manually set in Menu Options
Dimmer mode off
Dimmer mode 1 (fast speed)
Dimmer mode 2 (middle speed)
Dimmer mode 3 (slow speed)
5-Channel
Channel Function Value Setting
1
Dimmer
000 ó255
0 to 100%
2
Red
000 ó255
0 to 100%
3
Green
000 ó255
0 to 100%
4
Blue
000 ó255
0 to 100%
5 Shutter
000 ó010
011 ó255
No function
Strobe (slow to fast)
3-Channel
Channel Function Value Setting
1
Red
000 ó255
0 to 100%
2
Green
000 ó255
0 to 100%
3
Blue
000 ó255
0 to 100%

Page 14 of 19 SlimBANK™ TRI-18 User Manual
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
•Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode (Static, Auto, or
Sound-Active) to a DMX string connected to a DMX controller. Products in standalone
mode may transmit DMX signals that could interfere with the DMX signals from the
controller.
Sound-Active
Mode
To enable the Sound-Active mode, do the following:
1. Press <MENU>repeatedly until Snd shows on the display.
2. Press <ENTER>.
Sound Sensitivity
To set the sound sensitivity, follow the instructions below:
1. Press <MENU> repeatedly until SenS shows on the display.
2. Use <UP> or <DOWN> to select the desired sound sensitivity (u 0–u100).
3. Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).
Auto Program
To select an auto program, do the following:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER> and P 1–P 14 shows on the display.
3. Use <UP> or <DOWN> to select the desired auto program.
4. Press <ENTER>.
Program Speed
To set the auto program speed, follow the instructions below:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> or <DOWN> to select the desired auto program speed
S 1–S100 (slow to fast).
3. Press <ENTER>.

SlimBANK™ TRI-18 User Manual Page 15 of 19
Static Colors
To select a preset static color, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER> and r(red), g(green), b(blue), gb (cyan), r b (magenta),
rg (yellow), or rgb (white) shows on the display.
3. Use <UP> or <DOWN> to select the desired preset color.
4. Press <ENTER>.
Custom Color
Mixing
To custom mix a color, follow the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and one of the following colors shows on the display: rXXX (red),
gXXX (green), or bXXX (blue).
3. Press <ENTER> repeatedly to select the desired color.
4. Use <UP> or <DOWN> to select the desired color value 0–255 (0 to 100%).
NOTE: Selecting 0will turn the color off.
5. Press <ENTER> to set the color value and continue to the next color.
6. Repeat steps 3 to 5 until you create your desired color.
Selecting the
Dimmer Mode
To select the dimmer mode, do the following:
Press <MENU> repeatedly until dIM shows on the display.1. Press <ENTER> and one of the following shows on the display:2. •OFF (dimmer speed off)
•dIM1 (dimmer mode 1, fast speed)
•dIM2 (dimmer mode 2, middle speed)
•dIM3 (dimmer mode 3, slow speed)
Use <UP> or <DOWN> to select the desired dimmer mode.3. Press <ENTER>.4.
Temperature
Display
To view the temperature of the LEDs, follow the instructions below:
1. Press <MENU> repeatedly until tEMP shows on the display.
2. Press <ENTER>and the temperature will be shown in degrees Celsius.

Page 16 of 19 SlimBANK™ TRI-18 User Manual
Master/Slave
Mode
The Master/Slave mode allows a single SlimBANK™ TRI-18 unit (the “master”) to
control the actions of one or more SlimBANK™ TRI-18 units (the “slaves”) without the
need of a DMX controller. The master unit will be set to operate in either an auto
program or Sound-Active mode, while the slave units will be set to operate in Slave
mode. Once set and connected, the slave units will operate in unison with the master
unit.
Configure the units as indicated below.
Slave units:
1. Set the DMX address to d001.
2. Connect the DMX input of the first slave unit to the DMX output of the master unit.
3. Connect the DMX input of the subsequent slave units to the DMX output of the
previous slave unit.
4. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in either an auto program or Sound-Active mode.
2. Make the master unit the first unit in the DMX daisy chain.
•Configure all the slave units before connecting the master unit to the DMX daisy
chain.
•Never connect a DMX controller to a DMX string configured for Master/Slave
operation because the controller may interfere with the signals from the master unit.
•Do not connect more than 31 slave units to the master unit.

SlimBANK™ TRI-18 User Manual Page 17 of 19
5.TECHNICAL INFORMATION
Product
Maintenance
Dust build-up reduces light output performance and can cause overheating. This can
lead to reduction of the light source’s life and mechanical wear. To maintain optimum
performance and minimize wear, clean the product at least twice a month. However,
usage and environmental conditions contribute to increased cleaning frequency.
To clean the product, follow the instructions below:
•Unplug the product from power.
•Wait until the product is at room temperature.
•Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface and vents.
•Clean all external optics and glass/transparent surfaces with a mild soap solution,
ammonia-free glass cleaner, or isopropyl alcohol.
•Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
•Softly wipe any dirt or grime to the outside edges of the external optics or
glass/transparent surface.
•Gently polish the external optics and glass/transparent surfaces until they are free of
haze and lint.
Always dry the external optics and glass/transparent surfaces carefully after cleaning
them.

Page 18 of 19 SlimBANK™ TRI-18 User Manual
6.TECHNICAL SPECIFICATIONS
Dimensions and
Weight
Length
Width
Height
Weight
15.3 in (389 mm)
7.7 in (197 mm)
7.4 in (187 mm)
7 lb (3.2 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100 to 240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
105 W
109 W
Operating current
0.9 A
0.5 A
Power linking current (units)
8 A (9 units)
8 A (16 units)
Fuse
T 2 A, 250 V
T 2 A, 250 V
Power I/O
US/Worldwide
UK/Europe
Power input connector
IEC
IEC
Power output connector
Edison
IEC
Power Cord plug
Edison (US)
Local plug
Light Source
Type
Power
Lifespan
LED
3 W
50,000 hours
Color
Quantity
Current
Tri-color
18
350 mA x 3
Photo Optic
Parameter
Illuminance @ 2 m
5450 lx
Beam angle
17°
Field angle
32°
Strobe rate
0 to 20 Hz
Thermal
Maximum External Temp.
Cooling System
104 °F (40 °C)
Convection
DMX
I/O Connectors
Connector Type
Channel Range
3-pin XLR
Sockets
3, 5, 9, 13
Ordering
Product Name
Item Code
UPC Number
SlimBANK™ TRI-18
03030667
781462210151

SlimBANK™ TRI-18 User Manual Page 19 of 19
Returns
To return a product or request support:
•In the U.S., contact CHAUVET® World Headquarters (see below).
•In the UK or Ireland, contact CHAUVET® Europe Ltd. (see below).
•In any other country, DO NOT contact CHAUVET®. Contact your distributor. See
www.chauvetlighting.com for distributors outside the U.S., United Kingdom, or
Ireland.
If you live outside the U.S.
, United Kingdom, or Ireland, contact your distributor of record
and follow their instructions on how to return CHAUVET® products to them. Visit our
website for contact details.
Call the corresponding CHAUVET® Technical Support office and request a Return
Merchandise Authorization (RMA) number before shipping the product. Be prepared to
provide the model number, serial number, and a brief description of the cause for the
return.
You must send the merchandise prepaid, in its original box, and with its original packing
and accessories. CHAUVET® will not issue call tags.
Clearly label the package with the RMA number. CHAUVET® will refuse any product
returned without an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number
directly on the box.
Before sending the product, clearly write the following information on a piece of paper
and place it inside the box:
•Your name
•Your address
•Your phone number
•RMA number
•A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate
packaging will be your responsibility. FedEx packing or double-boxing are
recommended.
CHAUVET® reserves the right to use its own discretion to repair or replace
returned product(s).
Contact Us
World Headquarters
CHAUVET®
General Information
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice: [phone]
Fax: [phone]
Toll free: [phone]
United Kingdom & Ireland
CHAUVET® Europe Ltd.
General Information
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: [phone]
Fax: [phone]
Technical Support
Voice: [phone] (Press 4)
Fax: [phone]
Email: [e-mail]
Technical Support
Email: [e-mail]
World Wide Web
www.chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk